Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 308545, 13 pages
http://dx.doi.org/10.1155/2014/308545
Research Article

Analysis of Heat Transfers inside Counterflow Plate Heat Exchanger Augmented by an Auxiliary Fluid Flow

Mechanical Engineering Department, King Abdulaziz University, P.O. Box 80204, Jeddah 21589, Saudi Arabia

Received 30 October 2013; Accepted 15 January 2014; Published 25 February 2014

Academic Editors: C. Bao and S. Eiamsa-ard

Copyright © 2014 A.-R. A. Khaled. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Kakac and H. Liu, Heat Exchangers: Selection, Rating and Thermal Design, CRC Press, New York, NY, USA, 2nd edition, 2002.
  2. G. F. Hewit, C. L. Shires, and T. R. Bott, Process Heat Transfer, CRC Press, New York, NY, USA, 1994.
  3. A.-R. A. Khaled, M. Siddique, N. I. Abdulhafiz, and A. Y. Boukhary, “Recent advances in heat transfer enhancements: a review report,” International Journal of Chemical Engineering, vol. 2010, Article ID 106461, 28 pages, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Laohalertdecha, P. Naphon, and S. Wongwises, “A review of electrohydrodynamic enhancement of heat transfer,” Renewable and Sustainable Energy Reviews, vol. 11, no. 5, pp. 858–876, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. M. E. Steinke and S. G. Kandlikar, “Review of single-phase heat transfer enhancement techniques for application in microchannels, minichannels and microdevices,” International Journal of Heat and Technology, vol. 22, no. 2, pp. 3–11, 2004. View at Google Scholar · View at Scopus
  6. W. M. Kay and A. L. London, Compact Heat Exchangers, McGraw-Hill, New York, NY, USA,, 3rd edition, 1984.
  7. E. A. D. Saunders, Heat Exchangers—Selection, Design, and Construction, John Wiley & Sons, New York, NY, USA, 1988.
  8. S. Liu and M. Saker, “A comprehensive review on passive heat transfer enhancements in pipe exchangers,” Renewable and Sustainable Energy Reviews, vol. 19, pp. 64–81, 2013. View at Google Scholar
  9. K. M. Stone, “A comprehensive review on passive heat transfer enhancements in pipe exchangers,” Tech. Rep. TR-105, Air Conditioning and Refrigeration Center, College of Engineering, University of Illinois at Urbana-Champaign, 1996. View at Google Scholar
  10. A. E. Bergles, Handbook of Heat Transfer, McGraw-Hill, New York, NY, USA, 3rd edition, 1998.
  11. S. Lee, S. U.-S. Choi, S. Li, and J. A. Eastman, “Measuring thermal conductivity of fluids containing oxide nanoparticles,” Journal of Heat Transfer, vol. 121, no. 2, pp. 280–288, 1999. View at Google Scholar · View at Scopus
  12. Y. Xuan and Q. Li, “Heat transfer enhancement of nanofluids,” International Journal of Heat and Fluid Flow, vol. 21, no. 1, pp. 58–64, 2000. View at Publisher · View at Google Scholar · View at Scopus
  13. M. I. Hasan, A. M. A. Rageb, and M. Yaghoubi, “Investigation of a counter flow microchannel heat exchanger performance with using nanofluid as a coolant,” Journal of Electronics Cooling and Thermal Control, vol. 2, no. 2, pp. 35–43, 2012. View at Google Scholar
  14. W. Yu and H. Xie, “A review on nanofluids: preparation, stability mechanisms, and applications,” Journal of Nanomaterials, vol. 2012, Article ID 435873, 17 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Kakaç and A. Pramuanjaroenkij, “Review of convective heat transfer enhancement with nanofluids,” International Journal of Heat and Mass Transfer, vol. 52, no. 13-14, pp. 3187–3196, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. Peles, A. Koşar, C. Mishra, C. Kuo, and B. Schneider, “Forced convective heat transfer across a pin fin micro heat sink,” International Journal of Heat and Mass Transfer, vol. 48, no. 17, pp. 3615–3627, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Shafeie, O. Abouali, K. Jafarpur, and G. Ahmadi, “Numerical study of heat transfer performance of single-phase heat sinks with micro pin-fin structures,” Applied Thermal Engineering, vol. 58, pp. 68–76, 2013. View at Google Scholar
  18. A. Bejan, Convection Heat Transfer, John Wiley & Sons, New York, NY, USA, 4th edition, 2013.
  19. F. P. Incorpera, D. P. DeWitt, T. L. Bergman, and A. S. Lavine, Fundamentals of Heat and Mass Transfer, John Wiley & Sons, New York, NY, USA, 6th edition, 2006.
  20. P. H. Oosthuizen and D. Naylor, Introduction to Convective Heat Transfer Analysis, McGraw-Hill, New York, NY, USA, 1999.
  21. M. Vera and A. Liñán, “Laminar counterflow parallel-plate heat exchangers: exact and approximate solutions,” International Journal of Heat and Mass Transfer, vol. 53, no. 21-22, pp. 4885–4898, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. A.-R. A. Khaled and K. Vafai, “Analysis of flexible microchannel heat sink systems,” International Journal of Heat and Mass Transfer, vol. 48, no. 9, pp. 1739–1746, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. A.-R. A. Khaled and K. Vafai, “Cooling augmentation using microchannels with rotatable separating plates,” International Journal of Heat and Mass Transfer, vol. 54, no. 15-16, pp. 3732–3739, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. F. G. Blottner, “Finite difference methods of solution of the boundary-layer equations,” The American Institute of Aeronautics and Astronautics Journal, vol. 8, pp. 193–205, 1977. View at Google Scholar