Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 309387, 10 pages
http://dx.doi.org/10.1155/2014/309387
Research Article

Investigations on the Influence of the In-Stream Pylon and Strut on the Performance of a Scramjet Combustor

Science and Technology on Scramjet Laboratory, National University of Defense Technology, Changsha, Hunan 410073, China

Received 22 April 2014; Revised 27 June 2014; Accepted 28 July 2014; Published 31 August 2014

Academic Editor: Antonio F. Bertachini A. Prado

Copyright © 2014 Hao Ouyang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Ben-Yakar, Experimental investigation of mixing and ignition of transverse jets in supersonic crossflows [Doctor thesis], Stanford University, 2000.
  2. M.-B. Sun, H. Geng, J.-H. Liang, and Z.-G. Wang, “Mixing characteristics in a supersonic combustor with gaseous fuel injection upstream of a cavity flameholder,” Flow, Turbulence and Combustion, vol. 82, no. 2, pp. 271–286, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. R. A. Balar, G. Young, B. Pang, A. K. Gupta, K. H. Yu, and A. P. Kothari, “Comparison of parallel and normal fuel injection in a supersonic combustor,” in Proceedings of the 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, pp. 1245–1255, AIAA, July 2006. View at Scopus
  4. D. Bayley and R. Hartfield, “Experimental investigation of angled injection in a compressible flow,” AIAA 95-2414.
  5. M. Gruber, A. Nejad, and J. Dutton, “An experimental investigation of transverse injection from circular and elliptical nozzles into a supersonic crossflow,” Final Report WL-TR-2102, Wright Laboratory, 1996. View at Google Scholar
  6. Y. Yamane, Y. Ando, S. Aso et al., “A numerical study on mixing of supersonic flow field with parallel injection through ramp nozzle,” AIAA 94-2944.
  7. D. R. Eklund and S. D. Stouffer, “A numerical and experimental study of a supersonic combustor employing swept ramp fuel injectors,” AIAA 94-2819, 1994. View at Google Scholar
  8. T. M. Abdel-Salam, S. N. Tiwari, and T. O. Mohieldin, “Effects of ramp side angle in supersonic mixing,” AIAA Journal, vol. 41, no. 6, pp. 1199–1201, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. R. C. Rogers, D. P. Capriotti, and R. W. Guy, “Experimental supersonic combustion research at NASA Langley,” AIAA 98-2506.
  10. D. S. Stouffer, R. N. Baker, P. D. Capriotti et al., “Effects of compression and expansion-ramp fuel injector configurations on scramjet combustion and heat transfer,” Tech. Rep. AIAA 93-0609, 1993. View at Google Scholar
  11. H. Y. Wu, J. Zhou, H. B. Wang, M. B. Sun, and S. P. Zhang, “Performance comparison between the ramp injectors with different structures in supersonic combustion,” Journal of Aerospace Power, vol. 24, no. 7, pp. 1476–1481, 2009. View at Google Scholar · View at Scopus
  12. R. A. Balar, A. K. Gupta, K. H. Yu, and A. P. Kothari, “Pylon-aided fuel injection into supersonic flow,” in Proceedings of the 45th Aerospace Sciences Meeting, AIAA-2007-834, 2007.
  13. A. B. Freeborn, P. King, and M. R. Gruber, “Swept-leading-edge pylon effects on a scramjet pylon-cavity flameholder flowfield,” Journal of Propulsion and Power, vol. 25, no. 3, pp. 571–582, 2009. View at Publisher · View at Google Scholar
  14. L. S. Jacobsen, S. D. Gallimore, J. A. Schetz, and W. F. O'Brien, “Improved aerodynamic-ramp injector in supersonic flow,” Journal of Propulsion and Power, vol. 19, no. 4, pp. 663–673, 2003. View at Google Scholar · View at Scopus
  15. S. K. Cox-Stouffer and M. R. Gruber, “Effects of spanwise injection spacing on mixing characteristics of aerodynamic ramp injectors,” in Proceedings of the 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AlAA 98-3272, Cleveland, Ohio, USA, July 1998.
  16. L. S. Jacobsen, S. D. Gallimore, J. A. Schetz, and W. F. O'Brien, “Improved aerodynamic-ramp injector in supersonic flow,” Journal of Propulsion and Power, vol. 19, no. 4, pp. 663–673, 2003. View at Publisher · View at Google Scholar · View at Scopus
  17. S. K. Cox-Stouffer and M. R. Gruber, “Further investigation of the effects of aerodynamic ramp design upon mixing characteristics,” AIAA 99-2238.
  18. T. Mathur, M. Gruber, K. Jackson et al., “Supersonic combustion experiments with a cavity-based fuel injector,” Journal of Propulsion and Power, vol. 17, no. 6, pp. 1305–1312, 2001. View at Publisher · View at Google Scholar · View at Scopus
  19. M. R. Gruber, J. M. Donbar, C. D. Carter, and K.-Y. Hsu, “Mixing and combustion studies using cavity-based flameholders in a supersonic flow,” Journal of Propulsion and Power, vol. 20, no. 5, pp. 769–778, 2004. View at Publisher · View at Google Scholar · View at Scopus
  20. L. S. Jacobsen, C. D. Carter, and A. C. Dwenger, “Cavity-based injector mixing experiments for supersonic combustors with implications on igniter placement,” in Proceedings of the 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, pp. 9035–9047, AIAA, July 2006. View at Scopus
  21. J.-Y. Heo, K.-J. Kim, H.-G. Sung, H.-S. Choi, and V. Yang, “Numerical study on kerosene/lox supercritical mixing characteristics of a swirl injector,” in Proceedings of the 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Nashville, Tenn, USA, January 2012. View at Scopus
  22. D. G. Lilley, “Swirl and lateral jet injection for mixing and combustion efficiency,” Tech. Rep. AIAA 2014-1383, 2014. View at Google Scholar
  23. S. Murugappan, E. Gutmark, C. Carter, J. Donbar, M. Gruber, and K.-Y. Hsu, “Transverse supersonic controlled swirling jet in a supersonic cross stream,” AIAA Journal, vol. 44, no. 2, pp. 290–300, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. P. Gerlinger and D. Brüggemann, “Numerical investigation of hydrogen strut injections into supersonic airflows,” Journal of Propulsion and Power, vol. 16, no. 1, pp. 22–28, 2000. View at Publisher · View at Google Scholar · View at Scopus
  25. V. Aravind and K. Kurian, “Mixing enhancement by Strut based injection in supersonic flow,” in Proceedings of the 25th International Symposium on Shock Waves (ISSW '25), Bangalore, India, July 2005.
  26. P. Gerlinger, P. Stoll, M. Kindler, F. Schneider, and M. Aigner, “Numerical investigation of mixing and combustion enhancement in supersonic combustors by strut induced streamwise vorticity,” Aerospace Science and Technology, vol. 12, no. 2, pp. 159–168, 2008. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  27. D. W. Bogdanoff, “Advanced injection and mixing techniques for scramjet combustors,” Journal of Propulsion and Power, vol. 10, no. 2, pp. 183–190, 1994. View at Publisher · View at Google Scholar · View at Scopus
  28. S. J. Kalidas and J. Kurian, “Enhancement of supersonic mixing with the help of pulsed injection,” in Proceedings of the 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, pp. 270–281, July 2007. View at Scopus
  29. P. J. Strykowski, A. Krothpali, and D. Wishart, “Enhancement of mixing in high-speed heated jets using a counterflowing nozzle,” AIAA journal, vol. 31, no. 11, pp. 2033–2038, 1993. View at Publisher · View at Google Scholar · View at Scopus
  30. S. Menon, “Shock-wave-induced mixing enhancement in scramjet combustors,” AIAA 89-0104, 1989. View at Google Scholar
  31. D. Nixon, G. D. Kuhn, and M. Farshchi, “Numerical simulation of a turbulent flow through a shock wave,” AIAA 90-1641, 1990. View at Google Scholar
  32. J.-H. Kim, Y. Yoon, I.-S. Jeung, H. Huh, and J.-Y. Choi, “Numerical study of mixing enhancement by shock waves in model scramjet engine,” AIAA Journal, vol. 41, no. 6, pp. 1074–1080, 2003. View at Publisher · View at Google Scholar · View at Scopus
  33. H. Ouyang, W. Liu, and M. Sun, “Numerical investigation of the influence of injection scheme on the ethylene supersonic combustion,” Advances in Mechanical Engineering, vol. 2014, Article ID 124204, 5 pages, 2014. View at Publisher · View at Google Scholar