Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 326427, 6 pages
http://dx.doi.org/10.1155/2014/326427
Research Article

Mechanistic Features of Nanodiamonds in the Lapping of Magnetic Heads

1School of Chemistry and Chemical Engineering, Sun Yat-sen University, Guangzhou 510275, China
2National Center for Nanoscience & Technology of China, Beijing 100190, China
3Department of Emergency, Jinling Hospital Medical School of Nanjing University, Nanjing 210000, China

Received 27 February 2014; Revised 9 May 2014; Accepted 19 May 2014; Published 22 June 2014

Academic Editor: Erjia Liu

Copyright © 2014 Xionghua Jiang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. A. Gromov, S. A. Vorozhtsov, V. F. Komarov, G. V. Sakovich, Y. I. Pautova, and M. Offermann, “Ageing of nanodiamond powder: physical characterization of the material,” Materials Letters, vol. 91, pp. 198–201, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. E. Osawa, Handbook of Advanced Ceramics, 2nd edition, 2013.
  3. J. Mona, J.-S. Tu, T.-Y. Kang, C.-Y. Tsai, E. Perevedentseva, and C.-L. Cheng, “Surface modification of nanodiamond: photoluminescence and Raman studies,” Diamond and Related Materials, vol. 24, pp. 134–138, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. H. D. Wang, Q. Yang, H. Niu, and I. Badea, “Adsorption of azo dye onto nanodiamond surface,” Diamond and Related Materials, vol. 26, pp. 1–6, 2012. View at Google Scholar
  5. E. Osawa, “Recent progress and perspectives in single-digit nanodiamond,” ,Diamond and Related Materials, vol. 16, no. 12, pp. 2018–2022, 2007. View at Google Scholar
  6. X. Z. Liu, T. Yu, Q. P. Wei, Z. M. Yu, and X. Y. Xu, “Enhanced diamond nucleation on copper substrates by employing an electrostatic self-assembly seeding process with modified nanodiamond particles,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 412, pp. 82–89, 2012. View at Google Scholar
  7. Q. Zou, Y. G. Li, L. H. Zou, and M. Z. Wang, “Characterization of structures and surface states of the nanodiamond synthesized by detonation,” Materials Characterization, vol. 60, no. 11, pp. 1257–1262, 2009. View at Google Scholar
  8. I. Neitzel, V. Mochalin, I. Knoke, G. R. Palmese, and Y. Gogotsi, “Mechanical properties of epoxy composites with high contents of nanodiamond,” Composites Science and Technology, vol. 71, no. 5, pp. 710–716, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. Sumaiya, I. Raafat, and N. Ibrahim, “Mechanism of abrasive wear in nanomachining,” Tribology Letters, vol. 42, pp. 275–284, 2011. View at Google Scholar
  10. G. M. Schmid, M. Miller, and C. Brooks, “Step and flash imprint lithography for manufacturing patterned media,” Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, vol. 27, no. 2, pp. 573–580, 2009. View at Google Scholar
  11. R. P. Ambekar, D. B. Bogy, Q. Dai, and B. Marchon, “Critical clearance and lubricant instability at the head-disk interface of a disk drive,” Applied Physics Letters, vol. 92, no. 3, Article ID 033104, 2008. View at Google Scholar
  12. D. Kim, W. T. Kim, H. M. Kim, H. Chen, P. Jain, and M. S. Jhon, “A novel simulation of air/liquid bearings based on lattice Boltzmann method,” Journal of Applied Physics, vol. 105, no. 7, Article ID 07B701, 2009. View at Google Scholar
  13. S. Zhang, B. Strom, S. C. Lee, and G. Tyndall, “Simulating the air bearing pressure and flying height in a humid environment,” Journal of Tribology, vol. 130, Article ID 011008, 4 pages, 2008. View at Google Scholar
  14. N. Liu and D. B. Bogy, “Boundary effect on particle motion in the head disk interface,” Tribology Letters, vol. 33, no. 1, pp. 21–27, 2009. View at Google Scholar
  15. S. K. Deoras and F. E. Talke, “Effect of intermolecular forces on the dynamic response of a slider,” Journal of Tribology, vol. 129, no. 1, pp. 177–180, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. N. Tagawa, A. Mori, and K. Senoue, “Effects of molecularly thin liquid lubricant films on slider hysteresis behavior in hard disk drives,” Journal of Tribology, vol. 129, no. 3, pp. 579–585, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. B. Tomcik, T. Osipowicz, and J. Y. Lee, “Diamond-like film as a corrosion protective layer on the hard disk,” Thin Solid Films, vol. 360, no. 1-2, pp. 173–180, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. K. Takata, “Strain imaging of a magnetic layer formed on an air bearing surface of a hard disk drive head for perpendicular recording,” Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, vol. 27, no. 2, pp. 997–1000, 2009. View at Google Scholar
  19. S. Weissner, Numerical and experimental investigation of the load/unload behavior of subambient pressure hard disk drive sliders [Ph.D. thesis], University of California, Berkerly, Calif, USA, 2001.
  20. S. J. Yoon, S. H. Son, and D. H. Choi, “Head slider designs considering dynamic L/UL systems for 1-in disk drives,” IEEE Transactions on Magnetics, vol. 44, 1, pp. 151–156.
  21. T. R. Albrecht and F. Sai, “Load/Unload technology for disk drives,” IEEE Transactions on Magnetics, vol. 35, no. 2, pp. 857–862, 1999. View at Publisher · View at Google Scholar · View at Scopus
  22. M. A. Dufresne and A. K. Menon, “Ultra-low flying height air bearing designs,” IEEE Transactions on Magnetics, vol. 36, no. 5, pp. 2733–2735, 2000. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Yonemura, S. Weissner, L. Zhou, and F. E. Talke, “Investigation of disk damage caused during load/unload using a surface reflectance analyzer,” Tribology International, vol. 38, no. 2, pp. 81–87, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Hu, P. M. Jones, and K. Li, “Air bearing dynamics of sub-ambient pressure sliders during dynamic unload,” Journal of Tribology, vol. 121, no. 3, pp. 553–559, 1999. View at Google Scholar
  25. S. Wang, F. P. Crimi, and R. J. Blanco, “Dynamic behavior of magnetic head sliders and carbon wear in a rampload process,” Microsystem Technologies, vol. 9, no. 4, pp. 266–270, 2003. View at Google Scholar · View at Scopus
  26. J. P. Peng, “Theoretical prediction of ramp loading/unloading process in hard disk drives,” Journal of Tribology, vol. 121, no. 3, pp. 568–574, 1999. View at Google Scholar
  27. J. Luo, D. Shu, and B. Shi, “The pulse width effect on the shock response of the hard disk drive,” International Journal of Impact Engineering, vol. 34, no. 8, pp. 1342–1349, 2007. View at Google Scholar
  28. S. Kumar, V. D. Khanna, and M. Sri-Jayantha, “Study of the head disk interface shock failure mechanism,” IEEE Transactions on Magnetics, vol. 30, no. 6, pp. 4155–4157, 1994. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Majumdar and B. Bhushan, “Fractal model of elastic-plastic contact between rough surfaces,” Journal of Tribology, vol. 113, no. 1, pp. 1–11, 1991. View at Google Scholar
  30. D. O. Ouma, Modeling of Chemical Mechanical Polishing for Dielectric Planarization, MIT Department of Electrical Engineering and Computer Science, 1999.
  31. K. L. Johnson, Contact Mechanics, Cambridge University Press, 1985.
  32. Y. Xie and B. Bhushan, “Effects of particle size, polishing pad and contact pressure in free abrasive polishing,” Wear, vol. 200, no. 1-2, pp. 281–295, 1996. View at Publisher · View at Google Scholar · View at Scopus
  33. J. F. Luo and D. A. Dornfeld, “Material removal mechanism in chemical mechanical polishing: theory and modeling,” IEEE Transactions Semiconductor Manufacturing, vol. 14, no. 2, pp. 112–133, 2011. View at Publisher · View at Google Scholar
  34. W. T. Tseng and Y. L. Wang, “Re-examination of pressure and speed dependences of removal rate during chemical-mechanical polishing processes,” Journal of the Electrochemical Society, vol. 144, pp. 15–17, 1997. View at Google Scholar
  35. M. C. Pohl and D. A. Griffiths, “The importance of particle size to the performance of abrasive particles in the CMP process,” Journal of Electronic Materials, vol. 25, no. 10, pp. 1612–1616, 1996. View at Google Scholar · View at Scopus