Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 370260, 13 pages
http://dx.doi.org/10.1155/2014/370260
Research Article

Preparation and Characterization of Chitosan/Feldspar Biohybrid as an Adsorbent: Optimization of Adsorption Process via Response Surface Modeling

1Textile Engineering Department, Amirkabir University of Technology, Tehran, Iran
2Department of Civil and Environmental Engineering, School of Science and Technology, Aalto University, P.O. Box 15200, 00076 Aalto, Finland

Received 26 August 2013; Accepted 28 October 2013; Published 23 January 2014

Academic Editors: M. Akgun and X. Luo

Copyright © 2014 Maryam Yazdani et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C.-H. Weng, Y.-T. Lin, and T.-W. Tzeng, “Removal of methylene blue from aqueous solution by adsorption onto pineapple leaf powder,” Journal of Hazardous Materials, vol. 170, no. 1, pp. 417–424, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. F. A. Pavan, A. C. Mazzocato, and Y. Gushikem, “Removal of methylene blue dye from aqueous solutions by adsorption using yellow passion fruit peel as adsorbent,” Bioresource Technology, vol. 99, no. 8, pp. 3162–3165, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. R. Jayaraj, M. C. Mohan, P. M. D. Prasath, and H. Khan, “Malachite green dye removal using the seaweed enteromorpha,” E-Journal of Chemistry, vol. 8, no. 2, pp. 649–656, 2011. View at Google Scholar · View at Scopus
  4. G. Crini, “Non-conventional low-cost adsorbents for dye removal: a review,” Bioresource Technology, vol. 97, no. 9, pp. 1061–1085, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. S. R. Popuri, Y. Vijaya, V. M. Boddu, and K. Abburi, “Adsorptive removal of copper and nickel ions from water using chitosan coated PVC beads,” Bioresource Technology, vol. 100, no. 1, pp. 194–199, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. L. Wang and A. Wang, “Adsorption characteristics of Congo Red onto the chitosan/montmorillonite nanocomposite,” Journal of Hazardous Materials, vol. 147, no. 3, pp. 979–985, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Kittinaovarat, P. Kansomwan, and N. Jiratumnukul, “Chitosan/modified montmorillonite beads and adsorption Reactive Red 120,” Applied Clay Science, vol. 48, no. 1-2, pp. 87–91, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. H.-Y. Zhu, R. Jiang, and L. Xiao, “Adsorption of an anionic azo dye by chitosan/kaolin/γ-Fe2O3 composites,” Applied Clay Science, vol. 48, no. 3, pp. 522–526, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Gecol, P. Miakatsindila, E. Ergican, and S. R. Hiibel, “Biopolymer coated clay particles for the adsorption of tungsten from water,” Desalination, vol. 197, no. 1–3, pp. 165–178, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. W. S. Wan Ngah, L. C. Teong, and M. A. K. M. Hanafiah, “Adsorption of dyes and heavy metal ions by chitosan composites: a review,” Carbohydrate Polymers, vol. 83, no. 4, pp. 1446–1456, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Alkan, Ö. Demirbaş, S. Çelikçapa, and M. Doǧan, “Sorption of acid red 57 from aqueous solution onto sepiolite,” Journal of Hazardous Materials, vol. 116, no. 1-2, pp. 135–145, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. C.-C. Wang, L.-C. Juang, T.-C. Hsu, C.-K. Lee, J.-F. Lee, and F.-C. Huang, “Adsorption of basic dyes onto montmorillonite,” Journal of Colloid and Interface Science, vol. 273, no. 1, pp. 80–86, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Atun, M. Tunçay, G. Hisarli, R. Y. Talman, and H. Hoşgörmez, “Adsorption equilibria between dye and surfactant in single and binary systems onto geological materials,” Applied Clay Science, vol. 45, no. 4, pp. 254–261, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Yazdani, N. M. Mahmoodi, M. Arami, and H. Bahrami, “Isotherm, kinetic, and thermodynamic of cationic dye removal from binary system by Feldspar,” Separation Science and Technology, vol. 47, no. 11, pp. 1660–1672, 2012. View at Publisher · View at Google Scholar
  15. Y. Aşęl, M. Nurbaşa, and Y. SağAçıkelb, “A comparative study for the sorption of Cd(II) by K-feldspar and sepiolite as soil components, and the recovery of Cd(II) using rhamnolipid biosurfactant,” Journal of Environmental Management, vol. 88, no. 3, pp. 383–392, 2008. View at Publisher · View at Google Scholar
  16. M. Yazdani, N. M. Mahmoodi, M. Arami, and H. Bahrami, “Surfactant-modified feldspar: isotherm, kinetic, and thermodynamic of binary system dye removal,” Journal of Applied Polymer Science, vol. 126, no. 1, pp. 340–349, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. K. P. Singh, S. Gupta, A. K. Singh, and S. Sinha, “Experimental design and response surface modeling for optimization of Rhodamine B removal from water by magnetic nanocomposite,” Chemical Engineering Journal, vol. 165, no. 1, pp. 151–160, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Sugashini and K. M. M. S. Begum, “Column adsorption studies for the removal of Cr(VI) ions by ethylamine modified chitosan carbonized rice husk composite beads with modelling and optimization,” Journal of Chemistry, vol. 2013, Article ID 460971, 11 pages, 2013. View at Publisher · View at Google Scholar
  19. S. S. Moghaddam, M. R. A. Moghaddam, and M. Arami, “Response surface optimization of acid red 119 dye from simulated wastewater using Al based waterworks sludge and polyaluminium chloride as coagulant,” Journal of Environmental Management, vol. 92, no. 4, pp. 1284–1291, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. R. H. Myers, Response Surface Methodology, Allyn and Bacon, New York, NY, USA, 1971.
  21. J. N. Sahu, J. Acharya, and B. C. Meikap, “Response surface modeling and optimization of chromium(VI) removal from aqueous solution using Tamarind wood activated carbon in batch process,” Journal of Hazardous Materials, vol. 172, no. 2-3, pp. 818–825, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. S. Ho and G. McKay, “Sorption of dye from aqueous solution by peat,” Chemical Engineering Journal, vol. 70, no. 2, pp. 115–124, 1998. View at Publisher · View at Google Scholar · View at Scopus
  23. L. Wang and A. Wang, “Adsorption behaviors of Congo red on the N,O-carboxymethyl-chitosan/montmorillonite nanocomposite,” Chemical Engineering Journal, vol. 143, no. 1–3, pp. 43–50, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. S. F. Wang, L. Shen, Y. J. Tong et al., “Biopolymer chitosan/montmorillonite nanocomposites: preparation and characterization,” Polymer Degradation and Stability, vol. 90, no. 1, pp. 123–131, 2005. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Özcan, E. M. Öncü, and A. S. Özcan, “Adsorption of Acid Blue 193 from aqueous solutions onto DEDMA-sepiolite,” Journal of Hazardous Materials, vol. 129, no. 1–3, pp. 244–252, 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. F. Deniz, “Adsorption properties of low-cost biomaterial derived from Prunus amygdalus L. for dye removal from water,” The Scientific World Journal, vol. 2013, Article ID 961671, 8 pages, 2013. View at Publisher · View at Google Scholar
  27. R. Han, J. Zhang, P. Han, Y. Wang, Z. Zhao, and M. Tang, “Study of equilibrium, kinetic and thermodynamic parameters about methylene blue adsorption onto natural zeolite,” Chemical Engineering Journal, vol. 145, no. 3, pp. 496–504, 2009. View at Publisher · View at Google Scholar · View at Scopus
  28. D. Karadag, Y. Koc, M. Turan, and B. Armagan, “Removal of ammonium ion from aqueous solution using natural Turkish clinoptilolite,” Journal of Hazardous Materials, vol. 136, no. 3, pp. 604–609, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. K. P. Singh, S. Gupta, A. K. Singh, and S. Sinha, “Optimizing adsorption of crystal violet dye from water by magnetic nanocomposite using response surface modeling approach,” Journal of Hazardous Materials, vol. 186, no. 2-3, pp. 1462–1473, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. S. J. Allen, G. Mckay, and J. F. Porter, “Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems,” Journal of Colloid and Interface Science, vol. 280, no. 2, pp. 322–333, 2004. View at Publisher · View at Google Scholar · View at Scopus
  31. S. Lagergren, “About the theory of so-called adsorption of soluble substances,” Kungliga Svenska Vetenskapsakademiens Handlingar, vol. 24, no. 4, pp. 1–39, 1898. View at Google Scholar
  32. Y. S. Ho and G. McKay, “Pseudo-second order model for sorption processes,” Process Biochemistry, vol. 34, no. 5, pp. 451–465, 1999. View at Publisher · View at Google Scholar · View at Scopus
  33. D. Karadag, E. Akgul, S. Tok, F. Erturk, M. A. Kaya, and M. Turan, “Basic and reactive dye removal using natural and modified zeolites,” Journal of Chemical and Engineering Data, vol. 52, no. 6, pp. 2436–2441, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. D. Karadag, M. Turan, E. Akgul, S. Tok, and A. Faki, “Adsorption equilibrium and kinetics of Reactive Black 5 and Reactive Red 239 in aqueous solution onto surfactant-modified zeolite,” Journal of Chemical and Engineering Data, vol. 52, no. 5, pp. 1615–1620, 2007. View at Publisher · View at Google Scholar · View at Scopus