The Influence of Tool Path Strategies on Cutting Force and Surface Texture during Ball End Milling of Low Curvature Convex Surfaces

<div class="floats-full-page floats-full-page-other"><h2>Table 12</h2><div class="floats-full-page-caption">ANOVA for <svg height="11.75" id="M96" style="vertical-align:-0.23206pt" version="1.1" viewbox="0 0 8.2875004 11.75" width="8.2875004" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<g transform="matrix(.017,-0,0,-.017,.062,11.4)"><path d="M457 488l-30 -3q-17 148 -131 148q-53 0 -84.5 -34.5t-31.5 -82.5q0 -42 25.5 -72t74.5 -62l33 -22q63 -42 95 -85t32 -102q0 -84 -67 -137t-163 -53q-58 0 -113 22t-70 43l-4 152l27 4q4 -32 15 -62.5t31 -59.5t53.5 -47t76.5 -18q56 0 92 35t36 96q0 39 -25 70t-78 68&#10;l-31 22q-32 23 -53.5 41.5t-45 57t-23.5 77.5q0 82 58 132.5t156 50.5q46 0 101 -17l18.5 -6t17 -6t8.5 -3q-4 -55 0 -147z" id="x1D446"></path></g>
</svg>/<svg height="11.3125" id="M97" style="vertical-align:-0.1092pt" version="1.1" viewbox="0 0 14.9875 11.3125" width="14.9875" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<g transform="matrix(.017,-0,0,-.017,.062,11.113)"><path d="M857 650l-6 -28q-44 -4 -61.5 -16.5t-29.5 -48.5q-11 -32 -37 -166l-78 -399h-29l-351 537h-4l-56 -276q-24 -120 -24 -164q0 -35 17.5 -46t75.5 -15l-6 -28h-245l7 28q41 2 62 14t31 44q10 30 41 171l53 245q8 44 6.5 60.5t-14.5 33.5q-10 15 -27 19.5t-64 6.5l6 28h153&#10;l350 -516h5l48 257q25 131 25 171q0 34 -17.5 45t-77.5 15l7 28h240z" id="x1D441"></path></g>
</svg> ratios of cutting forces in 3D-offset cutter path strategy.</div><div class="floats-full-page-content"><table class="table-group" id="tab12"><tr><td><table class="table"><tr><td class="thead-hr" colspan="6"><hr /></td></tr><tr class="thead"><td align="left">Source of variance</td><td align="center">DOF</td><td align="center">Adj SS</td><td align="center">Adj MS</td><td align="center"><svg height="11.175" id="M98" style="vertical-align:-0.0pt" version="1.1" viewbox="0 0 10.7 11.175" width="10.7" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<g transform="matrix(.017,-0,0,-.017,.062,11.113)"><path d="M599 650l-18 -160l-30 -2q-2 70 -11 94q-5 16 -26 24t-75 8h-94q-27 0 -33.5 -6.5t-12.5 -32.5l-43 -226h108q52 0 72.5 5t31 18t28.5 52h28l-40 -200h-28q-1 42 -6 56.5t-24.5 21t-70.5 6.5h-108l-32 -177q-13 -65 1 -80.5t88 -22.5l-8 -28h-279l6 28q61 5 77.5 20.5&#10;t29.5 81.5l72 387l7.5 40.5t1 26.5t-4 18t-15.5 10t-24 6t-37 4l8 28h461z" id="x1D439"></path></g>
</svg> ratio</td><td align="center"><svg height="11.175" id="M99" style="vertical-align:-0.0pt" version="1.1" viewbox="0 0 10.9375 11.175" width="10.9375" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<g transform="matrix(.017,-0,0,-.017,.062,11.113)"><path d="M619 482q0 -69 -40.5 -119t-96 -72.5t-118.5 -26.5h-44l-70 20l-31 -151q-14 -67 0.5 -83t89.5 -22l-5 -28h-287l8 28q65 7 81.5 22t29.5 83l79 398q12 56 0.5 70.5t-78.5 20.5l7 28h255q108 0 164 -43t56 -125zM524 478q0 141 -146 141q-25 0 -47 -8q-16 -6 -20.5 -13.5&#10;t-10.5 -39.5l-43 -241q37 -13 83 -13q67 0 125.5 45t58.5 129z" id="x1D443"></path></g>
</svg> value</td></tr><tr><td class="thead-hr" colspan="6"><hr /></td></tr><tr><td align="left"><svg height="15.4" id="M100" style="vertical-align:-3.3907pt" version="1.1" viewbox="0 0 18.1875 15.4" width="18.1875" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<g transform="matrix(.017,-0,0,-.017,.062,11.112)"><path d="M730 650l-8 -28q-52 -4 -72 -18t-64 -77q-79 -113 -321 -539h-33l-119 541q-13 59 -29.5 73t-66.5 20l7 28h245l-8 -28l-28 -5q-33 -6 -40.5 -15.5t-0.5 -38.5l102 -450h2q191 320 246 430q21 42 15.5 56t-43.5 19l-31 4l7 28h240z" id="x1D449"></path></g>
<g transform="matrix(.012,-0,0,-.012,12.675,15.187)"><path d="M383 397q0 -32 -35 -49q-12 -6 -23 8q-37 45 -84 45t-90 -71q-40 -65 -40 -167q0 -57 22 -86t59 -29q38 0 81.5 24.5t69.5 51.5l16 -21q-44 -53 -104 -84t-109 -31q-56 0 -89.5 41t-33.5 117q0 61 30 124t79 105q33 28 81 50.5t86 22.5q34 0 59 -15.5t25 -35.5z" id="x1D450"></path></g>
</svg> (m/min)</td><td align="center">2</td><td align="center">34.3910</td><td align="center">17.1955</td><td align="center">643.88</td><td align="center">0.002</td></tr><tr><td align="left"><svg height="15.4" id="M101" style="vertical-align:-3.3907pt" version="1.1" viewbox="0 0 16.15 15.4" width="16.15" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<g transform="matrix(.017,-0,0,-.017,.062,11.112)"><path d="M599 650l-18 -160l-30 -2q-2 70 -11 94q-5 16 -26 24t-75 8h-94q-27 0 -33.5 -6.5t-12.5 -32.5l-43 -226h108q52 0 72.5 5t31 18t28.5 52h28l-40 -200h-28q-1 42 -6 56.5t-24.5 21t-70.5 6.5h-108l-32 -177q-13 -65 1 -80.5t88 -22.5l-8 -28h-279l6 28q61 5 77.5 20.5&#10;t29.5 81.5l72 387l7.5 40.5t1 26.5t-4 18t-15.5 10t-24 6t-37 4l8 28h461z" id="x1D439"></path></g>
<g transform="matrix(.012,-0,0,-.012,10.637,15.187)"><path d="M383 397q0 -32 -35 -49q-12 -6 -23 8q-37 45 -84 45t-90 -71q-40 -65 -40 -167q0 -57 22 -86t59 -29q38 0 81.5 24.5t69.5 51.5l16 -21q-44 -53 -104 -84t-109 -31q-56 0 -89.5 41t-33.5 117q0 61 30 124t79 105q33 28 81 50.5t86 22.5q34 0 59 -15.5t25 -35.5z" id="x1D450"></path></g>
</svg> (mm/tooth)</td><td align="center">2</td><td align="center">10.6667</td><td align="center">5.3333</td><td align="center">199.70</td><td align="center">0.005</td></tr><tr><td align="left"><svg height="15.6875" id="M102" style="vertical-align:-3.3907pt" version="1.1" viewbox="0 0 14.475 15.6875" width="14.475" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
<g transform="matrix(.017,-0,0,-.017,.062,11.4)"><path d="M457 488l-30 -3q-17 148 -131 148q-53 0 -84.5 -34.5t-31.5 -82.5q0 -42 25.5 -72t74.5 -62l33 -22q63 -42 95 -85t32 -102q0 -84 -67 -137t-163 -53q-58 0 -113 22t-70 43l-4 152l27 4q4 -32 15 -62.5t31 -59.5t53.5 -47t76.5 -18q56 0 92 35t36 96q0 39 -25 70t-78 68&#10;l-31 22q-32 23 -53.5 41.5t-45 57t-23.5 77.5q0 82 58 132.5t156 50.5q46 0 101 -17l18.5 -6t17 -6t8.5 -3q-4 -55 0 -147z" id="x1D446"></path></g>
<g transform="matrix(.012,-0,0,-.012,8.225,15.475)"><path d="M445 282q0 -64 -27.5 -125t-80.5 -104q-80 -65 -168 -65q-73 0 -109.5 46.5t-36.5 116.5q0 92 46.5 163t119.5 104q66 30 108 30q67 0 107.5 -43.5t40.5 -122.5zM355 280q0 62 -26.5 94.5t-64.5 32.5q-26 0 -44 -8q-39 -18 -74 -82t-35 -163q0 -57 25.5 -90.5t70.5 -33.5&#10;q22 0 36 6q46 20 79 89t33 155z" id="x1D45C"></path></g>
</svg> (mm)</td><td align="center">2</td><td align="center">10.1510</td><td align="center">5.0755</td><td align="center">190.05</td><td align="center">0.005</td></tr><tr><td align="left">Residual error</td><td align="center">2</td><td align="center">0.0534</td><td align="center">0.0267</td><td align="center"> </td><td align="center"> </td></tr><tr><td align="left" colspan="6"><hr /></td></tr><tr><td align="left">Total</td><td align="center">8</td><td align="center">55.2620</td><td align="center"> </td><td align="center"> </td><td align="center"> </td></tr><tr class="table-tr"><td colspan="6"><hr class="tbody-hr" /></td></tr></table></td></tr></table></div></div>

Table 12 | The Influence of Tool Path Strategies on Cutting Force and Surface Texture during Ball End Milling of Low Curvature Convex Surfaces

title

Table 12: The Influence of Tool Path Strategies on Cutting Force and Surface Texture during Ball End Milling of Low Curvature Convex Surfaces

description

Table 12

About this journal

<p><em>The Scientific World Journal</em> publishes original research, reviews, and clinical studies covering a wide range of subjects in science, technology, and medicine.</p>


Journal profile

Meet the editorial board

<p><em>The Scientific World Journal</em> maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors who are experts in the field of study.</p>


Editor spotlight

Submit your proposal

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.