The Influence of Tool Path Strategies on Cutting Force and Surface Texture during Ball End Milling of Low Curvature Convex Surfaces

Table 8

Response table for total cutting force for 3D-offset strategy.

Level	𝑉𝑐	𝐹𝑐	𝑆𝑜
1	−54.60	−52.63	−52.46
2	−51.21	−53.71	−54.15
3	−55.83	−55.29	−55.02
Delta	4.62	2.65	2.56
Rank	1	2	3