Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 391690, 11 pages
http://dx.doi.org/10.1155/2014/391690
Review Article

Review of Development Survey of Phase Change Material Models in Building Applications

1Department of Mechanical Engineering, University Technology Malaysia, Johor Bahru, Malaysia
2Machine and Mechanical Department, University of Technology, Baghdad, Iraq
3Department of Mechanical Engineering, Baqubah Technical Institute, Foundation of Technical Education, Baghdad, Iraq

Received 9 May 2014; Revised 17 August 2014; Accepted 21 August 2014; Published 11 September 2014

Academic Editor: Guobing Zhou

Copyright © 2014 Hussein J. Akeiber et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Nomura, M. Tsubota, T. Oya, N. Okinaka, and T. Akiyama, “Heat storage in direct-contact heat exchanger with phase change material,” Applied Thermal Engineering, vol. 50, no. 1, pp. 26–34, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. E. Oró, A. de Gracia, A. Castell, M. M. Farid, and L. F. Cabeza, “Review on phase change materials (PCMs) for cold thermal energy storage applications,” Applied Energy, vol. 99, pp. 513–533, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Rezaei, M. R. Anisur, M. H. Mahfuz, M. A. Kibria, R. Saidur, and I. H. S. C. Metselaar, “Performance and cost analysis of phase change materials with different melting temperatures in heating systems,” Energy, vol. 53, pp. 173–178, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Li, Y. Zhang, M. Li, and D. Zhang, “Testing method of phase change temperature and heat of inorganic high temperature phase change materials,” Experimental Thermal and Fluid Science, vol. 44, pp. 697–707, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. L. F. Cabeza, A. Castell, C. Barreneche, A. De Gracia, and A. I. Fernández, “Materials used as PCM in thermal energy storage in buildings: a review,” Renewable and Sustainable Energy Reviews, vol. 15, no. 3, pp. 1675–1695, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Mehling and L. F. Cabeza, Heat and Cold Storage with PCM-An up to Date Introduction into Basics and Applications, Springer, Berlin, Germany, 2008.
  7. L. F. Cabeza, M. Ibáñez, C. Solé, J. Roca, and M. Nogués, “Experimentation with a water tank including a PCM module,” Solar Energy Materials and Solar Cells, vol. 90, no. 9, pp. 1273–1282, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. A. De Gracia, E. Oró, M. M. Farid, and L. F. Cabeza, “Thermal analysis of including phase change material in a domestic hot water cylinder,” Applied Thermal Engineering, vol. 31, no. 17-18, pp. 3938–3945, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. S. M. Hasnain, “Review on sustainable thermal energy storage technologies. Part I. Heat storage materials and techniques,” Energy Conversion and Management, vol. 39, no. 11, pp. 1127–1138, 1998. View at Publisher · View at Google Scholar · View at Scopus
  10. M. M. Farid, A. M. Khudhair, S. A. Razack, and S. Al-Hallaj, “A review on phase change energy storage: materials and applications,” Energy Conversion and Management, vol. 45, no. 9-10, pp. 1597–1615, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Castell, I. Martorell, M. Medrano, G. Pérez, and L. F. Cabeza, “Experimental study of using PCM in brick constructive solutions for passive cooling,” Energy and Buildings, vol. 42, no. 4, pp. 534–540, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Zalba, J. M. Marín, L. F. Cabeza, and H. Mehling, “Review on thermal energy storage with phase change: materials, heat transfer analysis and applications,” Applied Thermal Engineering, vol. 23, no. 3, pp. 251–283, 2003. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Sharma, V. V. Tyagi, C. R. Chen, and D. Buddhi, “Review on thermal energy storage with phase change materials and applications,” Renewable and Sustainable Energy Reviews, vol. 13, no. 2, pp. 318–345, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. M. M. Farid and A. N. Khalaf, “Performance of direct contact latent heat storage units with two hydrated salts,” Solar Energy, vol. 52, no. 2, pp. 179–189, 1994. View at Publisher · View at Google Scholar · View at Scopus
  15. W. A. Qureshi, N.-K. C. Nair, and M. M. Farid, “Impact of energy storage in buildings on electricity demand side management,” Energy Conversion and Management, vol. 52, no. 5, pp. 2110–2120, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Saito, “Recent advances in research on cold thermal energy storage,” International Journal of Refrigeration, vol. 25, no. 2, pp. 177–189, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Gil, M. Medrano, I. Martorell et al., “State of the art on high temperature thermal energy storage for power generation. Part 1-Concepts, materials and modellization,” Renewable and Sustainable Energy Reviews, vol. 14, no. 1, pp. 31–55, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Medrano, A. Gil, I. Martorell, X. Potau, and L. F. Cabeza, “State of the art on high-temperature thermal energy storage for power generation. Part 2: case studies,” Renewable and Sustainable Energy Reviews, vol. 14, no. 1, pp. 56–72, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. M. M. Kenisarin, “High-temperature phase change materials for thermal energy storage,” Renewable and Sustainable Energy Reviews, vol. 14, no. 3, pp. 955–970, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. M. D. Romero-Sánchez, C. Guillem-López, A. M. López-Buendía et al., “Treatment of natural stones with phase change materials: experiments and computational approaches,” Applied Thermal Engineering, vol. 48, pp. 136–143, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. M. A. Izquierdo-Barrientos, J. F. Belmonte, D. Rodríguez-Sánchez, A. E. Molina, and J. A. Almendros-Ibáñez, “A numerical study of external building walls containing phase change materials (PCM),” Applied Thermal Engineering, vol. 47, pp. 73–85, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. F. Kuznik and J. Virgone, “Experimental assessment of a phase change material for wall building use,” Applied Energy, vol. 86, no. 10, pp. 2038–2046, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. A. L. S. Chan, “Energy and environmental performance of building façades integrated with phase change material in subtropical Hong Kong,” Energy and Buildings, vol. 43, no. 10, pp. 2947–2955, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. S. D. Zwanzig, Y. Lian, and E. G. Brehob, “Numerical simulation of phase change material composite wallboard in a multi-layered building envelope,” Energy Conversion and Management, vol. 69, pp. 27–40, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. P. A. Mirzaei and F. Haghighat, “Modeling of phase change materials for applications in whole building simulation,” Renewable and Sustainable Energy Reviews, vol. 16, no. 7, pp. 5355–5362, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. M. J. Huang, P. C. Eames, and N. J. Hewitt, “The application of a validated numerical model to predict the energy conservation potential of using phase change materials in the fabric of a building,” Solar Energy Materials and Solar Cells, vol. 90, no. 13, pp. 1951–1960, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. A. de Gracia, L. Rincón, A. Castell et al., “Life cycle assessment of the inclusion of phase change materials (PCM) in experimental buildings,” Energy and Buildings, vol. 42, no. 9, pp. 1517–1523, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. F. Kuznik, J. Virgone, and J. Noel, “Optimization of a phase change material wallboard for building use,” Applied Thermal Engineering, vol. 28, no. 11-12, pp. 1291–1298, 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. N. Zhu, S. Wang, X. Xu, and Z. Ma, “A simplified dynamic model of building structures integrated with shaped-stabilized phase change materials,” International Journal of Thermal Sciences, vol. 49, no. 9, pp. 1722–1731, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. B. L. Gowreesunker and S. A. Tassou, “Effectiveness of CFD simulation for the performance prediction of phase change building boards in the thermal environment control of indoor spaces,” Building and Environment, vol. 59, pp. 612–625, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. N. Lidia, D. G. Alvaro, S. Cristian, A. Castell, and F. C. Luisa, “Thermal loads inside buildings with phase change materials: Experimental results,” Energy Procedia, vol. 30, pp. 342–349, 2012. View at Publisher · View at Google Scholar
  32. F. Francesco, “Trombe walls for lightweight buildings in temperate and hot climates. Exploring the use of phase-change materials for performances improvement,” Energy Procedia, vol. 30, pp. 1110–1119, 2012. View at Google Scholar
  33. F. Kuznik, J. Virgone, and K. Johannes, “In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard,” Renewable Energy, vol. 36, no. 5, pp. 1458–1462, 2011. View at Publisher · View at Google Scholar · View at Scopus
  34. B. M. Diaconu and M. Cruceru, “Novel concept of composite phase change material wall system for year-round thermal energy savings,” Energy and Buildings, vol. 42, no. 10, pp. 1759–1772, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. C. Voelker, O. Kornadt, and M. Ostry, “Temperature reduction due to the application of phase change materials,” Energy and Buildings, vol. 40, no. 5, pp. 937–944, 2008. View at Publisher · View at Google Scholar · View at Scopus
  36. G. Zhou, Y. Yang, X. Wang, and S. Zhou, “Numerical analysis of effect of shape-stabilized phase change material plates in a building combined with night ventilation,” Applied Energy, vol. 86, no. 1, pp. 52–59, 2009. View at Publisher · View at Google Scholar · View at Scopus
  37. N. Zhu, S. Wang, Z. Ma, and Y. Sun, “Energy performance and optimal control of air-conditioned buildings with envelopes enhanced by phase change materials,” Energy Conversion and Management, vol. 52, no. 10, pp. 3197–3205, 2011. View at Publisher · View at Google Scholar · View at Scopus
  38. A. Aranda-Usón, G. Ferreira, A. M. López-Sabirón, M. D. Mainar-Toledo, and I. Zabalza Bribián, “Phase change material applications in buildings: an environmental assessment for some Spanish climate severities,” Science of the Total Environment, vol. 444, pp. 16–25, 2013. View at Publisher · View at Google Scholar · View at Scopus
  39. A. Pasupathy, L. Athanasius, R. Velraj, and R. V. Seeniraj, “Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management,” Applied Thermal Engineering, vol. 28, no. 5-6, pp. 556–565, 2008. View at Publisher · View at Google Scholar · View at Scopus
  40. A. Pasupathy and R. Velraj, “Effect of double layer phase change material in building roof for year round thermal management,” Energy and Buildings, vol. 40, no. 3, pp. 193–203, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. J. Mazo, M. Delgado, J. M. Marin, and B. Zalba, “Modeling a radiant floor system with Phase Change Material (PCM) integrated into a building simulation tool: analysis of a case study of a floor heating system coupled to a heat pump,” Energy and Buildings, vol. 47, pp. 458–466, 2012. View at Publisher · View at Google Scholar · View at Scopus
  42. A. Arnault, F. Mathieu-Potvin, and L. Gosselin, “Internal surfaces including phase change materials for passive optimal shift of solar heat gain,” International Journal of Thermal Sciences, vol. 49, no. 11, pp. 2148–2156, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. V. V. Tyagi, D. Buddhi, R. Kothari, and S. K. Tyagi, “Phase change material (PCM) based thermal management system for cool energy storage application in building: an experimental study,” Energy and Buildings, vol. 51, pp. 248–254, 2012. View at Publisher · View at Google Scholar · View at Scopus
  44. B. Zalba, J. M. Marín, L. F. Cabeza, and H. Mehling, “Free-cooling of buildings with phase change materials,” International Journal of Refrigeration, vol. 27, no. 8, pp. 839–849, 2004. View at Publisher · View at Google Scholar · View at Scopus
  45. K. Nagano, S. Takeda, T. Mochida, K. Shimakura, and T. Nakamura, “Study of a floor supply air conditioning system using granular phase change material to augment building mass thermal storage—heat response in small scale experiments,” Energy and Buildings, vol. 38, no. 5, pp. 436–446, 2006. View at Publisher · View at Google Scholar · View at Scopus
  46. J. Persson and M. Westermark, “Phase change material cool storage for a Swedish Passive House,” Energy and Buildings, vol. 54, pp. 490–495, 2012. View at Publisher · View at Google Scholar · View at Scopus