Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 406324, 11 pages
http://dx.doi.org/10.1155/2014/406324
Research Article

Feasibility Tests on Concrete with Very-High-Volume Supplementary Cementitious Materials

1Department of Plant Architectural Engineering, Kyonggi University, Suwon-si, Gyeonggi-do 443-760, Republic of Korea
2Department of Architectural Engineering, Graduate School, Kyonggi University, Suwon-si, Gyeonggi-do 443-760, Republic of Korea

Received 1 June 2014; Accepted 17 July 2014; Published 6 August 2014

Academic Editor: Mohammed Maslehuddin

Copyright © 2014 Keun-Hyeok Yang and Yong-Su Jeon. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Khale and R. Chaudhary, “Mechanism of geopolymerization and factors influencing its development: a review,” Journal of Materials Science, vol. 42, no. 3, pp. 729–746, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. V. M. Malhotra and P. K. Mehta, Pozzolanic and Cementitious Materials, Gordon and Breach, 1996.
  3. E. Gartner, “Industrially interesting approaches to “low-CO2” cements,” Cement and Concrete Research, vol. 34, no. 9, pp. 1489–1498, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. K. H. Yang, Y. B. Jung, M. S. Cho, and S. H. Tae, “Effect of supplementary cementitious materials on reduction of CO2 emissions from concrete,” Journal of Cleaner Production, 2014. View at Publisher · View at Google Scholar
  5. S. W. M. Supit, F. U. A. Shaikh, and P. R. Sarker, “Effect of ultrafine fly ash on mechanical properties of high volume fly ash mortar,” Construction and Building Materials, vol. 51, pp. 278–286, 2014. View at Google Scholar
  6. Y. Y. Chen, B. L. A. Tuan, and C. L. Hwang, “Effect of paste amount on the properties of self-consolidating concrete containing fly ash and slag,” Construction and Building Materials, vol. 47, pp. 340–346, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. R. Siddique, “Performance characteristics of high-volume Class F fly ash concrete,” Cement and Concrete Research, vol. 34, no. 3, pp. 487–493, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Mala, A. K. Mullick, K. K. Jain, and P. K. Singh, “Effect of relative levels of mineral admixtures on strength of concrete with ternary cement blend,” International Journal of Concrete Structures and Materials, vol. 7, no. 3, pp. 239–249, 2013. View at Google Scholar
  9. A. M. Neville, Properties of Concrete, Addison Wesley Longman, New York, NY, USA, 1995.
  10. V. M. Malhotra and P. K. Mehta, High-Performance, High-Volume Fly Ash Concrete, Supplementary Cementing Materials for Sustainable Development Incorporated, Ottawa, Canada, 2002.
  11. A. A. Ramezanianpour and V. M. Malhotra, “Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume,” Cement and Concrete Composites, vol. 17, no. 2, pp. 125–133, 1995. View at Publisher · View at Google Scholar · View at Scopus
  12. P. K. Mukherjee, M. T. Loughborough, and V. M. Malhotra, “Development of high strength concrete incorporating a large percentage of fly ash and superplasticizers,” Cement and Concrete Aggregates, vol. 4, no. 2, pp. 81–86, 1982. View at Publisher · View at Google Scholar
  13. E. Mahmoud, A. Ibrahim, H. El-Chabib, and V. C. Patibandla, “Self-consolidating concrete incorporating high volume of fly ash, slag, and recycled alphalt pavement,” International Journal of Concrete Structures and Materials, vol. 7, no. 2, pp. 155–163, 2013. View at Google Scholar
  14. C. H. Huang, S. K. Lin, C. S. Chang, and H. J. Chen, “Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ash,” Construction and Building Materials, vol. 46, pp. 71–78, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. T. Lee and L. S. Wu, “Effects of the LOI of fly ash on the concrete properties,” in Proceedings of the Conference on the Application of Fly Ash Concrete in Taiwan, Department of Civil Engineering of National Central University, Taoyuan, Taiwan, 1992.
  16. H. Yazıcı, “The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze-thaw resistance of self-compacting concrete,” Construction and Building Materials, vol. 22, no. 4, pp. 456–462, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. ASTM, C618 , C989, C143, C231, C39, C666 Annual Book of ASTM Standards, V. 4.02, ASTM International, West Conshohocken, Pa, USA, 2012.
  18. J. H. Yoon, Portland Cement Paste and Concrete, Sejin Incorporated, Seoul, Republic of Korea, 1996.
  19. Y. S. Jeon, “Development of mass concrete with low hydration heat,” Tech. Rep. A04-03-12-10-09, Sampyo Incorporated, Seoul, Republic of Korea, 2010. View at Google Scholar
  20. NT Build 492, “Nordetest method—concrete, mortar and cement-based repair materials: chloride migration coefficient from non-steady-state migration experiments,” Nordic Council of Ministers, Scandinavia, 1999.
  21. K. H. Yang, “Development of a new approach for CO2 reducing-based concrete mix design,” Tech. Rep. 12CCTI-C063761-01, Kyonggi University, Suwon, Republic of Korea, 2013. View at Google Scholar
  22. ACI Committee 209, “Prediction of creep, shrinkage, and temperature effects in concrete structures,” American Concrete Institute, Farmington Hills, Mich, USA, 1994.
  23. E. Gruyaert, M. Maes, and N. de Belie, “Performance of BFS concrete: k-value concept versus equivalent performance concept,” Construction and Building Materials, vol. 47, pp. 441–455, 2013. View at Publisher · View at Google Scholar · View at Scopus