Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 474728, 15 pages
http://dx.doi.org/10.1155/2014/474728
Research Article

Strength of Footing with Punching Shear Preventers

1Advanced Building Research Division, Korea Institute of Civil Engineering and Building Technology (KICT), Goyang-si, Gyeonggi-do 411-712, Republic of Korea
2New Transportation Research Center, Korea Railroad Research Institute (KRRI), Uiwang-si, Gyeonggi-do 437-757, Republic of Korea

Received 30 May 2014; Revised 23 July 2014; Accepted 21 August 2014; Published 21 October 2014

Academic Editor: Brian Uy

Copyright © 2014 Sang-Sup Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. A. Elshafey, E. Rizk, H. Marzouk, and M. R. Haddara, “Prediction of punching shear strength of two-way slabs,” Engineering Structures, vol. 33, no. 5, pp. 1742–1753, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. K.-K. Choi, M. M. Reda Taha, and A. G. Sherif, “Simplified punching shear design method for slab-column connections using fuzzy learning,” ACI Structural Journal, vol. 104, no. 4, pp. 438–447, 2007. View at Google Scholar · View at Scopus
  3. D. D. Theodorakopoulos and R. N. Swamy, “Ultimate punching shear strength analysis of slab-column connections,” Cement and Concrete Composites, vol. 24, no. 6, pp. 509–521, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Fernández Ruiz, Y. Mirzaei, and A. Muttoni, “Post-punching behavior of flat slabs,” ACI Structural Journal, vol. 110, no. 5, pp. 801–811, 2013. View at Google Scholar · View at Scopus
  5. T. Clément, A. P. Ramos, M. F. Ruiz, and A. Muttoni, “Design for punching of prestressed concrete slabs,” Structural Concrete, vol. 14, no. 2, pp. 157–167, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. T. Clément, A. Pinho Ramos, M. Fernández Ruiz, and A. Muttoni, “Influence of prestressing on the punching strength of post-tensioned slabs,” Engineering Structures, vol. 72, pp. 56–69, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. K. Pilakoutas and X. Li, “Alternative shear reinforcement for reinforced concrete flat slabs,” Journal of Structural Engineering, vol. 129, no. 9, pp. 1164–1172, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. W. G. Corley and N. M. Hawkins, “Shearhead reinforcement for slabs,” ACI Journal Proceedings, vol. 65, no. 10, pp. 811–824, 1968. View at Google Scholar
  9. N. K. Subedi and P. S. Baglin, “Design of slab-column junctions in flat slabs,” Proceedings of the Institution of Civil Engineers: Structures and Buildings, vol. 156, no. 3, pp. 319–331, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. P. J. McHarg, W. D. Cook, D. Mitchell, and Y. S. Yoon, “Benefits of concentrated slab reinforcement and steel fibers on performance of slab-column connections,” ACI Structural Journal, vol. 97, no. 2, pp. 225–234, 2000. View at Google Scholar · View at Scopus
  11. M.-Y. Cheng and G. J. Parra-Montesinos, “Evaluation of steel fiber reinforcement for punching shear resistance in slab-column connections. Part I. Monotonically increased load,” ACI Structural Journal, vol. 107, no. 1, pp. 101–109, 2010. View at Google Scholar · View at Scopus
  12. M. H. Harajli, D. Maalouf, and H. Khatib, “Effect of fibers on the punching shear strength of slab-column connections,” Cement and Concrete Composites, vol. 17, no. 2, pp. 161–170, 1995. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Nguyen-Minh, M. Rovňák, T. Tran-Ngoc, and T. Le-Phuoc, “Punching shear resistance of post-tensioned steel fiber reinforced concrete flat plates,” Engineering Structures, vol. 45, pp. 324–337, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. M. R. Esfahani, M. R. Kianoush, and A. R. Moradi, “Punching shear strength of interior slab-column connections strengthened with carbon fiber reinforced polymer sheets,” Engineering Structures, vol. 31, no. 7, pp. 1535–1542, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. C. Ålander, “Advanced systems for rational slab reinforcement,” in Proceedings of the Conference “Heading for concrete solutions“, The European Ready Mixed concrete Association ERMCO, Helsinki, Finland, 2004.
  16. R. Koppitz, A. Kenel, and T. Keller, “Punching shear of RC flat slabs—review of analytical models for new and strengthening of existing slabs,” Engineering Structures, vol. 52, pp. 123–130, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Hallgren, S. Kinnunen, and B. Nylander, “Punching shear tests on column Footings,” Nordic Concrete Research, vol. 21, no. 3, pp. 1–22, 1998. View at Google Scholar
  18. J. Hegger, A. G. Sherif, and M. Ricker, “Experimental investigations on punching behavior of reinforced concrete footings,” ACI Structural Journal, vol. 103, no. 4, pp. 604–613, 2006. View at Google Scholar · View at Scopus
  19. J. Hegger, M. Ricker, and A. G. Sherif, “Punching strength of reinforced concrete footings,” ACI Structural Journal, vol. 106, no. 5, pp. 706–716, 2009. View at Google Scholar · View at Scopus
  20. CEB-FIP Model Code, “Bulletin D'Information no. 203–305,” Lausanne, Switzerland, 1990.
  21. American Concrete Institute, Building Code Requirements for Structural Concrete, ACI 318-11, American Concrete Institute, Farmington Hills, Mich, USA, 2011.
  22. H. Marzouk and A. Hussein, “Experimental investigation on the behavior of high-strength concrete slabs,” ACI Structural Journal, vol. 88, no. 6, pp. 701–713, 1991. View at Google Scholar · View at Scopus
  23. S. Guandalini, O. L. Burdet, and A. Muttoni, “Punching tests of slabs with low reinforcement ratios,” ACI Structural Journal, vol. 106, no. 1, pp. 87–95, 2009. View at Google Scholar · View at Scopus
  24. ABAQUS, ABAQUS Analysis User’s Manual Version 6.9-2, Dassault Systemes Simulia, Providence, RI, USA, 2009.
  25. L. P. Saenz, “Discussion of “equation for the stress-strain curve of concrete” by P. Desayi , and S. Krishnan,” American Concrete Institute Journal, vol. 61, pp. 1229–1235, 1964. View at Google Scholar
  26. T. T. C. Hsu and Y.-L. Mo, Unified Theory of Concrete Structures, John Wiley & Sons, New York, NY, USA, 2nd edition, 2010.
  27. J. Lee and G. L. Fenves, “Plastic-damage model for cyclic loading of concrete structures,” Journal of Engineering Mechanics, vol. 124, no. 8, pp. 892–900, 1998. View at Publisher · View at Google Scholar · View at Scopus