Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 616804, 9 pages
http://dx.doi.org/10.1155/2014/616804
Research Article

A Comparison in Mechanical Properties of Cermets of Calcium Silicate with Ti-55Ni and Ti-6Al-4V Alloys for Hard Tissues Replacement

1Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
2Department of Biomedical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia

Received 24 June 2014; Revised 7 August 2014; Accepted 14 September 2014; Published 4 November 2014

Academic Editor: Alan K. T. Lau

Copyright © 2014 Azim Ataollahi Oshkour et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Azim Ataollahi Oshkour, Sumit Pramanik, Seyed Farid Seyed Shirazi, Mehdi Mehrali, Yat-Huang Yau, and Noor Azuan Abu Osman, “A Comparison in Mechanical Properties of Cermets of Calcium Silicate with Ti-55Ni and Ti-6Al-4V Alloys for Hard Tissues Replacement,” The Scientific World Journal, vol. 2014, Article ID 616804, 9 pages, 2014. https://doi.org/10.1155/2014/616804.