Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 828131, 34 pages
http://dx.doi.org/10.1155/2014/828131
Review Article

Carbon Dioxide Separation from Flue Gases: A Technological Review Emphasizing Reduction in Greenhouse Gas Emissions

1Department of Chemical Engineering, Amirkabir University of Technology, P.O. Box 15875-4413, Tehran, Iran
2Catalyst Research Group, Petrochemical Research and Technology Company, National Petrochemical Company, P.O. Box 1435884711, Tehran, Iran
3Department of Petroleum Engineering, Petroleum University of Technology, P.O. Box 6198144471, Ahwaz, Iran

Received 17 August 2013; Accepted 31 October 2013; Published 17 February 2014

Academic Editors: D.-W. Han and V. A. Rogov

Copyright © 2014 Mohammad Songolzadeh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Q. Solomon, S. Q. D, M. Manning et al., “Book reviews,” South African Geographical Journal, vol. 91, pp. 103–104, 2009. View at Google Scholar
  2. C. A. McMillan, G. A. Keoleian, and D. V. Spitzley, Greenhouse Gases, University of Michigan, Ann Arbor, Mich, USA, 2005.
  3. T. J. Blasing, Recent Greenhouse Gas Concentrations, US Department of Energy, 32 edition, 2012. View at Publisher · View at Google Scholar
  4. C. H. Chiao, J. L. Chen, C. R. Lan, S. Chen, and H. W. Hsu, “Development of carbon dioxide capture and storage technology taiwan power company perspective,” Sustainable Environment Research, vol. 21, pp. 1–8, 2011. View at Google Scholar
  5. T. L. P. Dantas, F. M. T. Luna, I. J. Silva et al., “Carbon dioxide-nitrogen separation through pressure swing adsorption,” Chemical Engineering Journal, vol. 172, no. 2-3, pp. 698–704, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. K. E. Zanganeh, A. Shafeen, and C. Salvador, “CO2 capture and development of an advanced pilot-scale cryogenic separation and compression unit,” Energy Procedia, vol. 1, pp. 247–252, 2009. View at Google Scholar
  7. A. T. A. o.C.a.N.A.C.o, “Canadian aviation industry report on greenhouse gas emissions reductions,” Tech. Rep., Ottawa, Canda, 2012. View at Google Scholar
  8. D. Berstad, R. Anantharaman, and P. Nekså, “Low-temperature CO2capture technologies-applications and potential,” International Journal of Refrigeration, vol. 36, pp. 1403–1416, 2013. View at Google Scholar
  9. I.E.A.I.G.G.R.D. Programme, “CO2 abatement in oil refineries: fired heaters,” I. E. A. I.G.G.R.D, PH3/31 edition, 2000.
  10. L. Zhao, E. Riensche, R. Menzer, L. Blum, and D. Stolten, “A parametric study of CO2/N2 gas separation membrane processes for post-combustion capture,” Journal of Membrane Science, vol. 325, no. 1, pp. 284–294, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Hussain and M.-B. Hägg, “A feasibility study of CO2 capture from flue gas by a facilitated transport membrane,” Journal of Membrane Science, vol. 359, no. 1-2, pp. 140–148, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. I. T. Forum, “Reducing transport greenhouse gas emissions: trends & data,” 2010.
  13. N. Mahasenan, S. Smith, K. Humphreys, and Y. Kaya, “The cement industry and global climate change: current and potential future cement industry CO2 emissions,” in Proceedings of the Greenhouse Gas Control Technologies-6th International Conference, p. 995, Pergamon, Turkey, 2003.
  14. K. S. Lackner, A. H. A. Park, and B. G. Miller, “Eliminating CO2 emissions from coal-fired power plants,” in Generating Electricity in a Carbon-Constrained World, pp. 127–173, Academic Press, Boston, 2010. View at Google Scholar
  15. A. Mohammadi, M. Soltanieh, M. Abbaspour, and F. Atabi, “What is energy efficiency and emission reduction potential in the Iranian petrochemical industry?” International Journal of Greenhouse Gas Control, vol. 12, pp. 460–471, 2013. View at Google Scholar
  16. E. Worrell, L. Price, N. Martin, C. Hendriks, and L. O. Meida, “Carbon dioxide emissions from the global cement industry,” Annual Review of Energy and the Environment, vol. 26, pp. 303–329, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Yang, Z. Xu, M. Fan et al., “Progress in carbon dioxide separation and capture: a review,” Journal of Environmental Sciences, vol. 20, no. 1, pp. 14–27, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Barnett, S. Dessai, and M. Webber, “Will OPEC lose from the Kyoto Protocol?” Energy Policy, vol. 32, no. 18, pp. 2077–2088, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. H. Li, R. P. Berrens, A. K. Bohara, H. C. Jenkins-Smith, C. L. Silva, and D. L. Weimer, “Would developing country commitments affect US households' support for a modified Kyoto Protocol?” Ecological Economics, vol. 48, no. 3, pp. 329–343, 2004. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Crombie, S. Imbus, and I. Miracca, “CO2 capture project phase 3-demonstration phase,” Energy Procedia, vol. 4, pp. 6104–6108, 2011. View at Google Scholar
  21. U. Springer, “The market for tradable GHG permits under the Kyoto Protocol: a survey of model studies,” Energy Economics, vol. 25, no. 5, pp. 527–551, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Pridmore, A. Bristow, T. May, and M. Tight, “Climate change, impacts, future scenarios and the role of transport,” Report of University of Leeds, Institute for Transport Studies, 2003. View at Google Scholar
  23. J. G. J. Olivier, G. Janssens-Maenhout, and J. A. H. W. Peters, “Trends in global CO2 emissions,” Tech. Rep., PBL Netherlands Environmental Assessment Agency, Ispra, Italy, 2012. View at Google Scholar
  24. H. Herzog, J. Meldon, and A. Hatton, “Advanced post-combustion CO2 capture,” Tech. Rep., Clean Air Task Force, Doris Duke Foundation, 2009. View at Google Scholar
  25. J. C. M. Pires, F. G. Martins, M. C. M. Alvim-Ferraz, and M. Simões, “Recent developments on carbon capture and storage: an overview,” Chemical Engineering Research and Design, vol. 89, no. 9, pp. 1446–1460, 2011. View at Publisher · View at Google Scholar · View at Scopus
  26. D. G. Chapel, C. L. Mariz, and J. Ernest, “Recovery of CO2 from flue gases: commercial trends,” in Proceedings of the Canadian Society of Chemical Engineers Annual Meeting, pp. 1–16, 1999.
  27. F. T. Zangeneh, S. Sahebdelfar, and M. T. Ravanchi, “Conversion of carbon dioxide to valuable petrochemicals: an approach to clean development mechanism,” Journal of Natural Gas Chemistry, vol. 20, no. 3, pp. 219–231, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. N. Dave, T. Do, G. Puxty, R. Rowland, P. H. M. Feron, and M. I. Attalla, “CO2 capture by aqueous amines and aqueous ammonia-A Comparison,” Energy Procedia, vol. 1, pp. 949–954, 2009. View at Google Scholar
  29. R. Thiruvenkatachari, S. Su, H. An, and X. X. Yu, “Post combustion CO2 capture by carbon fibre monolithic adsorbents,” Progress in Energy and Combustion Science, vol. 35, no. 5, pp. 438–455, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. J. Gibbins and H. Chalmers, “Carbon capture and storage,” Energy Policy, vol. 36, no. 12, pp. 4317–4322, 2008. View at Publisher · View at Google Scholar · View at Scopus
  31. B. Metz, “Carbon Dioxide Capture and Storage:,” Special Report of the Intergovernmental Panel on Climate Change, 2005. View at Google Scholar
  32. T. F. Wall, “Combustion processes for carbon capture,” Proceedings of the Combustion Institute, vol. 31, pp. 31–47, 2007. View at Google Scholar
  33. E. Rubin and H. de Coninck, “IPCC special report on carbon dioxide capture and storage,” Tech. Rep., Cambridge University Press, UK, 2005, TNO, Cost Curves for CO2 Storage, part 2, 2004. View at Google Scholar
  34. V. R. Choudhary, S. Mayadevi, and A. P. Singh, “Sorption isotherms of methane, ethane, ethene and carbon dioxide on NaX, NaY and Na-mordenite zeolites,” Journal of the Chemical Society, Faraday Transactions, vol. 91, no. 17, pp. 2935–2944, 1995. View at Publisher · View at Google Scholar · View at Scopus
  35. P. Dechamps, “European CO2 capture and storage projects,” Tech. Rep., European Commission, Brussels, Belgium, 2007. View at Google Scholar
  36. B. J. P. Buhre, L. K. Elliott, C. D. Sheng, R. P. Gupta, and T. F. Wall, “Oxy-fuel combustion technology for coal-fired power generation,” Progress in Energy and Combustion Science, vol. 31, no. 4, pp. 283–307, 2005. View at Publisher · View at Google Scholar · View at Scopus
  37. M. Glazer, C. Bertrand, L. Fryda, and W. de Jong, “EOSLT consortium biomass co-firing, WP 4—biomass co-firing in oxy-fuel combustion Part II: ash deposition modelling of coal and biomass blends under air and oxygen combustion conditions,” Tech. Rep., Energy research Center of the Neterland, 2010. View at Google Scholar
  38. SAGE Publications, I. Green Issues and Debates: an A-to-Z Guide. Green Issues and Debates: an A-to-Z Guide, SAGE Publications, Oaks, Calif, USA.
  39. A. A. Olajire, “CO2 capture and separation technologies for end-of-pipe applications—a review,” Energy, vol. 35, no. 6, pp. 2610–2628, 2010. View at Publisher · View at Google Scholar · View at Scopus
  40. A. Samanta, A. Zhao, G. K. H. Shimizu, P. Sarkar, and R. Gupta, “Post-combustion CO2 capture using solid sorbents: a review,” Industrial and Engineering Chemistry Research, vol. 51, no. 4, pp. 1438–1463, 2012. View at Publisher · View at Google Scholar · View at Scopus
  41. J. S. Rhodes and D. W. Keith, “Engineering economic analysis of biomass IGCC with carbon capture and storage,” Biomass and Bioenergy, vol. 29, no. 6, pp. 440–450, 2005. View at Publisher · View at Google Scholar · View at Scopus
  42. T. L. Dantas, A. E. Rodrigues, and R. F. Moreira, “Separation of carbon dioxide from flue gas using adsorption on porous solids,” Tech: Greenhouse Gases—Capturing, Utilization and Reduction, 2012.
  43. G. S. Esber III, “Carbon dioxide capture technology for the coal-powered electricity industry: a systematic prioritization of research needs,” Tech. Rep., Massachusetts Institute of Technology, 2006. View at Google Scholar
  44. Y. Lv, X. Yu, J. Jia, S.-T. Tu, J. Yan, and E. Dahlquist, “Fabrication and characterization of superhydrophobic polypropylene hollow fiber membranes for carbon dioxide absorption,” Applied Energy, vol. 90, no. 1, pp. 167–174, 2012. View at Publisher · View at Google Scholar · View at Scopus
  45. E. J. Granite and T. O'Brien, “Review of novel methods for carbon dioxide separation from flue and fuel gases,” Fuel Processing Technology, vol. 86, no. 14-15, pp. 1423–1434, 2005. View at Publisher · View at Google Scholar · View at Scopus
  46. T. Nguyen, M. Hilliard, and G. T. Rochelle, “Amine volatility in CO2 capture,” International Journal of Greenhouse Gas Control, vol. 4, no. 5, pp. 707–715, 2010. View at Publisher · View at Google Scholar · View at Scopus
  47. M. Gupta, I. Coyle, and K. Thambimuthu, “CO2capture technologies and opportunities in Canada,” in Proceedings of the 1st Canadian CC&S Technology Roadmap Workshop CO2 capture technologies and opportunities in Canada, CANMET Energy Technology Centre Natural Resources Canada, 2003.
  48. H. J. Herzog, “The economics of CO2 separation and capture,” Journal of the Franklin Institute, vol. 7, pp. 13–24, 2000. View at Google Scholar
  49. G. Pellegrini, R. Strube, and G. Manfrida, “Comparative study of chemical absorbents in postcombustion CO2 capture,” Energy, vol. 35, no. 2, pp. 851–857, 2010. View at Publisher · View at Google Scholar · View at Scopus
  50. N. MacDowell, N. Florin, A. Buchard et al., “An overview of CO2 capture technologies,” Energy and Environmental Science, vol. 3, no. 11, pp. 1645–1669, 2010. View at Publisher · View at Google Scholar · View at Scopus
  51. X. P. Li Gang, A. Webley Paul, Zhang Jun, and R. Singh, “Competition of CO2/H2O in adsorption based CO2 capture,” Energy Procedia, vol. 1, pp. 1123–1130.
  52. P. Singh, J. P. M. Niederer, and G. F. Versteeg, “Structure and activity relationships for amine based CO2 absorbents-I,” International Journal of Greenhouse Gas Control, vol. 1, no. 1, pp. 5–10, 2007. View at Publisher · View at Google Scholar · View at Scopus
  53. S. Ma'mun, “Selection and characterization of new absorbents for carbon dioxide capture,” in Chemical Engineering, Faculty of Natural Science and Technology, 2005. View at Google Scholar
  54. S. Cavenati, C. A. Grande, and A. E. Rodrigues, “Removal of carbon dioxide from natural gas by vacuum pressure swing adsorption,” Energy and Fuels, vol. 20, no. 6, pp. 2648–2659, 2006. View at Publisher · View at Google Scholar · View at Scopus
  55. J. David, Economic evaluation of leading technology options 23 for sequestration of carbon dioxide [M.S. thesis], Chemical Engineering Practice Massachusetts Institute of Technology, 2000.
  56. D. L. Albritton, T. Barker, I. A. Bashmakov et al., Climate Change 2001: Synthesis Report, edited by D. J. Dokken, M. Noguer, ,P. V. d Linden,C. Johnson, J. Pan, Cambridge University Press, 2001.
  57. M. Wang, A. Lawal, P. Stephenson, J. Sidders, and C. Ramshaw, “Post-combustion CO2 capture with chemical absorption: a state-of-the-art review,” Chemical Engineering Research and Design, vol. 89, no. 9, pp. 1609–1624, 2011. View at Publisher · View at Google Scholar · View at Scopus
  58. J. Gabrielsen, H. F. Svendsen, M. L. Michelsen, E. H. Stenby, and G. M. Kontogeorgis, “Experimental validation of a rate-based model for CO2 capture using an AMP solution,” Chemical Engineering Science, vol. 62, no. 9, pp. 2397–2413, 2007. View at Publisher · View at Google Scholar · View at Scopus
  59. R. Idem, M. Wilson, P. Tontiwachwuthikul et al., “Pilot plant studies of the CO2 capture performance of aqueous MEA and mixed MEA/MDEA solvents at the University of Regina CO2 capture technology development plant and the boundary dam CO2 capture demonstration plant,” Industrial and Engineering Chemistry Research, vol. 45, no. 8, pp. 2414–2420, 2006. View at Publisher · View at Google Scholar · View at Scopus
  60. M. Lucquiaud and J. Gibbins, “On the integration of CO2 capture with coal-fired power plants: a methodology to assess and optimise solvent-based post-combustion capture systems,” Chemical Engineering Research and Design, vol. 89, no. 9, pp. 1553–1571, 2011. View at Publisher · View at Google Scholar · View at Scopus
  61. J. N. Knudsen, J. N. Jensen, P. J. Vilhelmsen, and O. Biede, “Experience with CO2 capture from coal flue gas in pilot-scale: testing of different amine solvents,” Energy Procedia, vol. 1, no. 1, pp. 783–790, 2009. View at Google Scholar
  62. P. H. M. Feron, “Exploring the potential for improvement of the energy performance of coal fired power plants with post-combustion capture of carbon dioxide,” International Journal of Greenhouse Gas Control, vol. 4, no. 2, pp. 152–160, 2010. View at Publisher · View at Google Scholar · View at Scopus
  63. F. Qin, S. Wang, A. Hartono, H. F. Svendsen, and C. Chen, “Kinetics of CO2 absorption in aqueous ammonia solution,” International Journal of Greenhouse Gas Control, vol. 4, no. 5, pp. 729–738, 2010. View at Publisher · View at Google Scholar · View at Scopus
  64. H. P. Mangalapally, R. Notz, S. Hoch et al., “Pilot plant experimental studies of post combustion CO2 capture by reactive absorption with MEA and new solvents,” Energy Procedia, vol. 1, pp. 963–970, 2009. View at Google Scholar
  65. P. S. Kumar, J. A. Hogendoorn, G. F. Versteeg, and P. H. M. Feron, “Kinetics of the reaction of CO2 with aqueous potassium salt of taurine and glycine,” AIChE Journal, vol. 49, no. 1, pp. 203–213, 2003. View at Publisher · View at Google Scholar · View at Scopus
  66. S. A. Freeman, R. Dugas, D. van Wagener, T. Nguyen, and G. T. Rochelle, “Carbon dioxide capture with concentrated, aqueous piperazine,” Energy Procedia, vol. 1, pp. 1489–1496, 2009. View at Google Scholar
  67. J. V. Holst, G. F. Versteeg, D. W. F. Brilman, and J. A. Hogendoorn, “Kinetic study of CO2 with various amino acid salts in aqueous solution,” Chemical Engineering Science, vol. 64, no. 1, pp. 59–68, 2009. View at Publisher · View at Google Scholar · View at Scopus
  68. E. S. Hamborg, J. P. M. Niederer, and G. F. Versteeg, “Dissociation constants and thermodynamic properties of amino acids used in CO2 absorption from (293 to 353) K,” Journal of Chemical and Engineering Data, vol. 52, no. 6, pp. 2491–2502, 2007. View at Publisher · View at Google Scholar · View at Scopus
  69. U. E. Aronu, H. F. Svendsen, and K. A. Hoff, “Investigation of amine amino acid salts for carbon dioxide absorption,” International Journal of Greenhouse Gas Control, vol. 4, no. 5, pp. 771–775, 2010. View at Publisher · View at Google Scholar · View at Scopus
  70. J. T. Yeh, K. P. Resnik, K. Rygle, and H. W. Pennline, “Semi-batch absorption and regeneration studies for CO2 capture by aqueous ammonia,” Fuel Processing Technology, vol. 86, no. 14-15, pp. 1533–1546, 2005. View at Publisher · View at Google Scholar · View at Scopus
  71. C. H. Yu, C. H. Huang, and C. S. Tan, “A Review of CO2 Capture by Absorption and Adsorption,” Aerosol and Air Quality Research, vol. 12, pp. 745–769, 2012. View at Google Scholar
  72. B. E. Gurkan, C. Juan, E. M. Mindrup et al., “Chemically complexing ionic liquids for post-combustion CO2 capture,” in Clearwater Clean Coal Conference, pp. 6–10, Clearwater, Fla, USA, 2010.
  73. E. D. Bates, R. D. Mayton, I. Ntai, and J. H. Davis Jr., “CO2 capture by a task-specific ionic liquid,” Journal of the American Chemical Society, vol. 124, no. 6, pp. 926–927, 2002. View at Publisher · View at Google Scholar · View at Scopus
  74. S. Baj, A. Siewniak, A. Chrobok, T. Krawczyk, and A. Sobolewski, “Monoethanolamine and ionic liquid aqueous solutions as effective systems for CO2capture,” Journal of Chemical Technology and Biotechnology, vol. 88, pp. 1220–1227, 2012. View at Google Scholar
  75. J. P. Ciferno, D. Lang, and G. T. Rochelle, Carbon Dioxide Capture by Absorption with Potassium Carbonate, University of Texas, 2010.
  76. J. T. Cullinane and G. T. Rochelle, “Thermodynamics of aqueous potassium carbonate, piperazine, and carbon dioxide,” Fluid Phase Equilibria, vol. 227, no. 2, pp. 197–213, 2005. View at Publisher · View at Google Scholar · View at Scopus
  77. H. P. Mangalapally and H. Hasse, “Pilot plant experiments with mea and new solvents for post combustion CO2 capture by reactive absorption,” Energy Procedia, vol. 4, pp. 1–8, 2011. View at Google Scholar
  78. J. Brouwer, P. Feron, and N. Ten Asbroek, “Amino-acid salts for CO2 capture from flue gases,” in Proceedings of the 4th Annual Conference on Carbon Capture & Sequestration, 2009.
  79. D. Kang, S. Park, H. Jo, J. Min, and J. Park, “Solubility of CO2in amino-acid-based solutions of (potassium sarcosinate), (potassium alaninate + piperazine), and (potassium serinate + piperazine),” Journal of Chemical & Engineering Data, vol. 58, pp. 1787–1791, 2013. View at Google Scholar
  80. B. Farid and E. Fadwa, “Front matter,” in Proceedings of the 2nd Annual Gas Processing Symposium, p. 488, Elsevier, Doha, Qatar, 2010.
  81. R. M. Davidson, Post-Combustion Carbon Capture from Coal Fired Plants: Solvent Scrubbing, IEA Clean Coal Centre, 2007.
  82. V. Darde, K. Thomsen, W. J. van Well, and E. H. Stenby, “Chilled ammonia process for CO2 capture,” Energy Procedia, vol. 1, pp. 1035–1042, 2009. View at Google Scholar
  83. S. Bishnoi and G. T. Rochelle, “Thermodynamics of piperazine/methyldiethanolamine/water/carbon dioxide,” Industrial and Engineering Chemistry Research, vol. 41, no. 3, pp. 604–612, 2002. View at Google Scholar · View at Scopus
  84. A. Bajpai and M. K. Mondal, “Equilibrium solubility of CO2in aqueous mixtures of DEA and AEEA,” Journal of Chemical & Engineering Data, vol. 58, pp. 1490–1495, 2013. View at Google Scholar
  85. A. L. Chaffee, G. P. Knowles, Z. Liang, J. Zhang, P. Xiao, and P. A. Webley, “CO2 capture by adsorption: materials and process development,” International Journal of Greenhouse Gas Control, vol. 1, no. 1, pp. 11–18, 2007. View at Publisher · View at Google Scholar · View at Scopus
  86. J.-R. Li, Y. Ma, M. C. McCarthy et al., “Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks,” Coordination Chemistry Reviews, vol. 255, no. 15-16, pp. 1791–1823, 2011. View at Publisher · View at Google Scholar · View at Scopus
  87. L.-Y. Meng and S.-J. Park, “Influence of MgO template on carbon dioxide adsorption of cation exchange resin-based nanoporous carbon,” Journal of Colloid and Interface Science, vol. 366, no. 1, pp. 135–140, 2012. View at Publisher · View at Google Scholar · View at Scopus
  88. M. Sevilla and A. B. Fuertes, “CO2 adsorption by activated templated carbons,” Journal of Colloid and Interface Science, vol. 366, no. 1, pp. 147–154, 2012. View at Publisher · View at Google Scholar · View at Scopus
  89. M. Martunus, Z. Helwani, A. D. Wiheeb, J. Kim, and M. R. Othman, “Improved carbon dioxide capture using metal reinforced hydrotalcite under wet conditions,” International Journal of Greenhouse Gas Control, vol. 7, pp. 127–136, 2012. View at Publisher · View at Google Scholar · View at Scopus
  90. B. Dou, Y. Song, Y. Liu, and C. Feng, “High temperature CO2 capture using calcium oxide sorbent in a fixed-bed reactor,” Journal of Hazardous Materials, vol. 183, no. 1–3, pp. 759–765, 2010. View at Publisher · View at Google Scholar · View at Scopus
  91. M. Kotyczka-moranska, G. Tomaszewicz, and G. Labojko, “Comparison of different methods for enhancing CO2capture by CaO-based sorbents. Review,” Physicochemical Problems of Mineral Processing, vol. 48, pp. 77–90, 2012. View at Google Scholar
  92. G. Valenti, D. Bonalumi, and E. Macchi, “A parametric investigation of the chilled ammonia process from energy and economic perspectives,” Fuel, vol. 101, pp. 74–83, 2011. View at Publisher · View at Google Scholar · View at Scopus
  93. Z. H. Lee, K. T. Lee, S. Bhatia, and A. R. Mohamed, “Post-combustion carbon dioxide capture: evolution towards utilization of nanomaterials,” Renewable and Sustainable Energy Reviews, vol. 16, no. 5, pp. 2599–2609, 2012. View at Publisher · View at Google Scholar · View at Scopus
  94. Z. Xiang, Z. Hu, D. Cao et al., “Metal-organic frameworks with incorporated carbon nanotubes: improving carbon dioxide and methane storage capacities by lithium doping,” Angewandte Chemie, vol. 50, no. 2, pp. 491–494, 2011. View at Publisher · View at Google Scholar · View at Scopus
  95. K. Essaki, M. Kato, and K. Nakagawa, “CO2 removal at high temperature using packed bed of lithium silicate pellets,” Journal of the Ceramic Society of Japan, vol. 114, no. 1333, pp. 739–742, 2006. View at Publisher · View at Google Scholar · View at Scopus
  96. C. S. Martavaltzi and A. A. Lemonidou, “Development of new CaO based sorbent materials for CO2 removal at high temperature,” Microporous and Mesoporous Materials, vol. 110, no. 1, pp. 119–127, 2008. View at Publisher · View at Google Scholar · View at Scopus
  97. R. Besson, M. Rocha Vargas, and L. Favergeon, “CO2 adsorption on calcium oxide: an atomic-scale simulation study,” Surface Science, vol. 606, no. 3-4, pp. 490–495, 2012. View at Publisher · View at Google Scholar · View at Scopus
  98. S. Miyata, “Anion-exchange properties of hydrotalcite-like compounds,” Clays & Clay Minerals, vol. 31, no. 4, pp. 305–311, 1983. View at Google Scholar · View at Scopus
  99. A. R. Mohamed, S. Bhatia, K. T. Lee, C. Y. H. Foo, Z. H. Lee, and N. A. Razali, “Nanomaterials as environmentally compatible next generation green carbon capture and utilization materials,” Transactions on GIGAKU, vol. 1, Article ID 01006, pp. 1–7, 2012. View at Google Scholar
  100. M. Songolzadeh, M. Takht Ravanchi, and M. Soleimani, “Carbon dioxide capture and storage: a general review on adsorbents,” World Academy of Science, Engineering and Technology, vol. 70, pp. 225–232, 2012. View at Google Scholar
  101. M. Anbia and V. Hoseini, “Development of MWCNT@MIL-101 hybrid composite with enhanced adsorption capacity for carbon dioxide,” Chemical Engineering Journal, vol. 191, pp. 326–330, 2012. View at Publisher · View at Google Scholar · View at Scopus
  102. L.-Y. Lin and H. Bai, “Continuous generation of mesoporous silica particles via the use of sodium metasilicate precursor and their potential for CO2 capture,” Microporous and Mesoporous Materials, vol. 136, no. 1–3, pp. 25–32, 2010. View at Publisher · View at Google Scholar · View at Scopus
  103. D. M. D'Alessandro, B. Smit, and J. R. Long, “Carbon dioxide capture: prospects for new materials,” Angewandte Chemie, vol. 49, no. 35, pp. 6058–6082, 2010. View at Publisher · View at Google Scholar · View at Scopus
  104. D. I. Jang and S. J. Park, “Influence of nickel oxide on carbon dioxide adsorption behaviors of activated carbons,” Fuel, vol. 102, pp. 439–444, 2012. View at Google Scholar
  105. S. Choi, J. H. Drese, and C. W. Jones, “Adsorbent materials for carbon dioxide capture from large anthropogenic point sources,” ChemSusChem, vol. 2, no. 9, pp. 796–854, 2009. View at Publisher · View at Google Scholar · View at Scopus
  106. J. A. Delgado, M. A. Uguina, J. L. Sotelo, and B. Ruíz, “Fixed-bed adsorption of carbon dioxide-helium, nitrogen-helium and carbon dioxide-nitrogen mixtures onto silicalite pellets,” Separation and Purification Technology, vol. 49, no. 1, pp. 91–100, 2006. View at Publisher · View at Google Scholar · View at Scopus
  107. H. R. Abid, G. H. Pham, H.-M. Ang, M. O. Tade, and S. Wang, “Adsorption of CH4 and CO2 on Zr-metal organic frameworks,” Journal of Colloid and Interface Science, vol. 366, no. 1, pp. 120–124, 2012. View at Publisher · View at Google Scholar · View at Scopus
  108. J. Wang, L. A. Stevens, T. C. Drage, and J. Wood, “Preparation and CO2 adsorption of amine modified Mg-Al LDH via exfoliation route,” Chemical Engineering Science, vol. 68, no. 1, pp. 424–431, 2012. View at Publisher · View at Google Scholar · View at Scopus
  109. A. K. Mishra and S. Ramaprabhu, “Palladium nanoparticles decorated graphite nanoplatelets for room temperature carbon dioxide adsorption,” Chemical Engineering Journal, vol. 187, pp. 10–15, 2012. View at Publisher · View at Google Scholar · View at Scopus
  110. G. Finos, S. Collins, G. Blanco et al., “Infrared spectroscopic study of carbon dioxide adsorption on the surface of cerium-gallium mixed oxides,” Catalysis Today, vol. 180, no. 1, pp. 9–18, 2012. View at Publisher · View at Google Scholar · View at Scopus
  111. R. P. Grimm, K. A. Eriksson, N. Ripepi, C. Eble, and S. F. Greb, “Seal evaluation and confinement screening criteria for beneficial carbon dioxide storage with enhanced coal bed methane recovery in the Pocahontas Basin, Virginia,” International Journal of Coal Geology, vol. 90-91, pp. 110–125, 2012. View at Publisher · View at Google Scholar · View at Scopus
  112. B. Guo, L. Chang, and K. Xie, “Adsorption of carbon dioxide on activated carbon,” Journal of Natural Gas Chemistry, vol. 15, no. 3, pp. 223–229, 2006. View at Publisher · View at Google Scholar · View at Scopus
  113. R. Sakurovs, S. Day, and S. Weir, “Relationships between the sorption behaviour of methane, carbon dioxide, nitrogen and ethane on coals,” Fuel, vol. 97, pp. 725–729, 2012. View at Publisher · View at Google Scholar · View at Scopus
  114. P. Weniger, J. Franců, P. Hemza, and B. M. Krooss, “Investigations on the methane and carbon dioxide sorption capacity of coals from the SW Upper Silesian Coal Basin, Czech Republic,” International Journal of Coal Geology, vol. 93, pp. 23–39, 2012. View at Publisher · View at Google Scholar · View at Scopus
  115. C. Garnier, G. Finqueneisel, T. Zimny et al., “Selection of coals of different maturities for CO2 Storage by modelling of CH4 and CO2 adsorption isotherms,” International Journal of Coal Geology, vol. 87, no. 2, pp. 80–86, 2011. View at Publisher · View at Google Scholar · View at Scopus
  116. J. C. Abanades, E. S. Rubin, and E. J. Anthony, “Sorbent cost and performance in CO2 capture systems,” Industrial and Engineering Chemistry Research, vol. 43, no. 13, pp. 3462–3466, 2004. View at Google Scholar · View at Scopus
  117. T. C. Drage, J. M. Blackman, C. Pevida, and C. E. Snape, “Evaluation of activated carbon adsorbents for CO2 capture in gasification,” Energy and Fuels, vol. 23, no. 5, pp. 2790–2796, 2009. View at Publisher · View at Google Scholar · View at Scopus
  118. W. Shen, S. Zhang, Y. He, J. Li, and W. Fan, “Hierarchical porous polyacrylonitrile-based activated carbon fibers for CO2 capture,” Journal of Materials Chemistry, vol. 21, no. 36, pp. 14036–14040, 2011. View at Publisher · View at Google Scholar · View at Scopus
  119. M. Gray, Y. Soong, K. Champagne, R. Stevens Jr, P. Toochinda, and S. Chuang, “Solid amine CO2capture sorbents,” Fuel, vol. 80, pp. 867–871, 2001. View at Google Scholar
  120. C. Pevida, M. G. Plaza, B. Arias, J. Fermoso, F. Rubiera, and J. J. Pis, “Surface modification of activated carbons for CO2 capture,” Applied Surface Science, vol. 254, no. 22, pp. 7165–7172, 2008. View at Publisher · View at Google Scholar · View at Scopus
  121. M. G. Plaza, C. Pevida, B. Arias, J. Fermoso, F. Rubiera, and J. J. Pis, “A comparison of two methods for producing CO2 capture adsorbents,” Energy Procedia, vol. 1, pp. 1107–1113, 2009. View at Google Scholar
  122. M. G. Plaza, S. García, F. Rubiera, J. J. Pis, and C. Pevida, “Post-combustion CO2 capture with a commercial activated carbon: comparison of different regeneration strategies,” Chemical Engineering Journal, vol. 163, no. 1-2, pp. 41–47, 2010. View at Publisher · View at Google Scholar · View at Scopus
  123. K. S. Nor Kamarudin and H. Mat, “Synthesis and modification of micro and mesoporous materials as CO2 adsorbent,” Tech. Rep., Faculty of Chemical and Natural Resources Engineering: University of Technology, Johor, Malaysia, 2009. View at Google Scholar
  124. M. Radosz, X. Hu, K. Krutkramelis, and Y. Shen, “Flue-gas carbon capture on carbonaceous sorbents: toward a low-cost multifunctional carbon filter for “green” energy producers,” Industrial and Engineering Chemistry Research, vol. 47, no. 10, pp. 3783–3794, 2008. View at Publisher · View at Google Scholar · View at Scopus
  125. J. M. Rosas, J. Bedia, J. Rodríguez-Mirasol, and T. Cordero, “Preparation of hemp-derived activated carbon monoliths. Adsorption of water vapor,” Industrial and Engineering Chemistry Research, vol. 47, no. 4, pp. 1288–1296, 2008. View at Publisher · View at Google Scholar · View at Scopus
  126. R. Yang, G. Liu, M. Li, J. Zhang, and X. Hao, “Preparation and N2, CO2 and H2 adsorption of super activated carbon derived from biomass source hemp (Cannabis sativa L.) stem,” Microporous and Mesoporous Materials, vol. 158, pp. 108–116, 2012. View at Publisher · View at Google Scholar · View at Scopus
  127. R. V. Siriwardane, M.-S. Shen, E. P. Fisher, and J. A. Poston, “Adsorption of CO2 on molecular sieves and activated carbon,” Energy and Fuels, vol. 15, no. 2, pp. 279–284, 2001. View at Publisher · View at Google Scholar · View at Scopus
  128. K. I. Vatalis, A. Laaksonen, G. Charalampides, and N. P. Benetis, “Intermediate technologies towards low-carbon economy. the Greek zeolite CCS outlook into the EU commitments,” Renewable and Sustainable Energy Reviews, vol. 16, no. 5, pp. 3391–3400, 2012. View at Publisher · View at Google Scholar · View at Scopus
  129. Z. Liu, C. A. Grande, P. Li, J. Yu, and A. E. Rodrigues, “Multi-bed vacuum pressure swing adsorption for carbon dioxide capture from flue gas,” Separation and Purification Technology, vol. 81, pp. 307–317, 2011. View at Publisher · View at Google Scholar · View at Scopus
  130. J. Zhang, P. Xiao, G. Li, and P. A. Webley, “Effect of flue gas impurities on CO2 capture performance from flue gas at coal-fired power stations by vacuum swing adsorption,” Energy Procedia, vol. 1, pp. 1115–1122, 2009. View at Google Scholar
  131. X. Cui, R. M. Bustin, and G. Dipple, “Selective transport of CO2, CH4, and N2 in coals: insights from modeling of experimental gas adsorption data,” Fuel, vol. 83, no. 3, pp. 293–303, 2004. View at Publisher · View at Google Scholar · View at Scopus
  132. C. J. Anderson, W. Tao, J. Jiang, S. I. Sandler, G. W. Stevens, and S. E. Kentish, “An experimental evaluation and molecular simulation of high temperature gas adsorption on nanoporous carbon,” Carbon, vol. 49, no. 1, pp. 117–125, 2011. View at Publisher · View at Google Scholar · View at Scopus
  133. M. Kumar and Y. Ando, “Chemical vapor deposition of carbon nanotubes: a review on growth mechanism and mass production,” Journal of Nanoscience and Nanotechnology, vol. 10, no. 6, pp. 3739–3758, 2010. View at Publisher · View at Google Scholar · View at Scopus
  134. M. Cinke, J. Li, C. W. Bauschlicher Jr., A. Ricca, and M. Meyyappan, “CO2 adsorption in single-walled carbon nanotubes,” Chemical Physics Letters, vol. 376, no. 5-6, pp. 761–766, 2003. View at Publisher · View at Google Scholar · View at Scopus
  135. A. F. Portugal, P. W. J. Derks, G. F. Versteeg, F. D. Magalhães, and A. Mendes, “Characterization of potassium glycinate for carbon dioxide absorption purposes,” Chemical Engineering Science, vol. 62, no. 23, pp. 6534–6547, 2007. View at Publisher · View at Google Scholar · View at Scopus
  136. R. Banerjee, A. Phan, B. Wang et al., “High-throughput synthesis of zeolitic imidazolate frameworks and application to CO2 capture,” Science, vol. 319, no. 5865, pp. 939–943, 2008. View at Publisher · View at Google Scholar · View at Scopus
  137. K. S. Park, Z. Ni, A. P. Côté et al., “Exceptional chemical and thermal stability of zeolitic imidazolate frameworks,” Proceedings of the National Academy of Sciences of the United States of America, vol. 103, no. 27, pp. 10186–10191, 2006. View at Publisher · View at Google Scholar · View at Scopus
  138. T. D. Burchell and R. R. Judkins, “Passive CO2 removal using a carbon fiber composite molecular sieve,” Energy Conversion and Management, vol. 37, no. 6–8, pp. 947–954, 1996. View at Google Scholar · View at Scopus
  139. Z. Yong, V. Mata, and A. E. Rodrigues, “Adsorption of carbon dioxide at high temperature—a review,” Separation and Purification Technology, vol. 26, no. 2-3, pp. 195–205, 2002. View at Publisher · View at Google Scholar · View at Scopus
  140. G. M. Kimber, M. Jagtoyen, Y. Q. Fei, and F. J. Derbyshire, “Fabrication of carbon fibre composites for gas separation,” Gas Separation and Purification, vol. 10, no. 2, pp. 131–136, 1996. View at Google Scholar · View at Scopus
  141. L. M. Viculis, J. J. Mack, O. M. Mayer, H. T. Hahn, and R. B. Kaner, “Intercalation and exfoliation routes to graphite nanoplatelets,” Journal of Materials Chemistry, vol. 15, no. 9, pp. 974–978, 2005. View at Publisher · View at Google Scholar · View at Scopus
  142. A. K. Mishra and S. Ramaprabhu, “Study of CO2 adsorption in low cost graphite nanoplatelets,” International Journal of Chemical Engineering and Applications, vol. 1, pp. 266–269, 2010. View at Google Scholar
  143. R. Du, X. Feng, and A. Chakma, “Poly(N,N-dimethylaminoethyl methacrylate)/polysulfone composite membranes for gas separations,” Journal of Membrane Science, vol. 279, no. 1-2, pp. 76–85, 2006. View at Publisher · View at Google Scholar · View at Scopus
  144. K. Kumar, C. N. Dasgupta, B. Nayak, P. Lindblad, and D. Das, “Development of suitable photobioreactors for CO2 sequestration addressing global warming using green algae and cyanobacteria,” Bioresource Technology, vol. 102, no. 8, pp. 4945–4953, 2011. View at Publisher · View at Google Scholar · View at Scopus
  145. H. Deng, H. Yi, X. Tang, Q. Yu, P. Ning, and L. Yang, “Adsorption equilibrium for sulfur dioxide, nitric oxide, carbon dioxide, nitrogen on 13X and 5A zeolites,” Chemical Engineering Journal, vol. 188, pp. 77–85, 2012. View at Publisher · View at Google Scholar · View at Scopus
  146. N. Gargiulo, F. Pepe, and D. Caputo, “Modeling carbon dioxide adsorption on polyethylenimine-functionalized TUD-1 mesoporous silica,” Journal of Colloid and Interface Science, vol. 367, no. 1, pp. 348–354, 2012. View at Publisher · View at Google Scholar · View at Scopus
  147. A. R. Millward and O. M. Yaghi, “Metal-organic frameworks with exceptionally high capacity for storage of carbon dioxide at room temperature,” Journal of the American Chemical Society, vol. 127, no. 51, pp. 17998–17999, 2005. View at Publisher · View at Google Scholar · View at Scopus
  148. C. Lu, H. Bai, F. Su, W. Chen, J. F. Hwang, and H.-H. Lee, “Adsorption of carbon dioxide from gas streams via mesoporous spherical-silica particles,” Journal of the Air and Waste Management Association, vol. 60, no. 4, pp. 489–496, 2010. View at Publisher · View at Google Scholar · View at Scopus
  149. A. Boonpoke, S. Chiarakorn, N. Laosiripojana, S. Towprayoon, and A. Chidthaisong, “synthesis of activated carbon and MCM-41 from bagasse and rice husk and their carbon dioxide adsorption capacity,” Journal of Sustainable Energy & Environmentn, vol. 2, pp. 77–81, 2011. View at Google Scholar
  150. J. Wei, L. Liao, Y. Xiao, P. Zhang, and Y. Shi, “Capture of carbon dioxide by amine-impregnated as-synthesized MCM-41,” Journal of Environmental Sciences, vol. 22, no. 10, pp. 1558–1563, 2010. View at Publisher · View at Google Scholar · View at Scopus
  151. Q. Wang, H. H. Tay, Z. Zhong, J. Luo, and A. Borgna, “Synthesis of high-temperature CO2adsorbents from organo-layered double hydroxides with markedly improved CO2capture capacity,” Energy & Environmental Science, vol. 5, pp. 7526–7530, 2012. View at Google Scholar
  152. H. Lin and B. D. Freeman, “Gas solubility, diffusivity and permeability in poly(ethylene oxide),” Journal of Membrane Science, vol. 239, no. 1, pp. 105–117, 2004. View at Publisher · View at Google Scholar · View at Scopus
  153. P. Chowdhury, C. Bikkina, and S. Gumma, “Gas adsorption properties of the chromium-based metal organic framework MIL-101,” The Journal of Physical Chemistry C, vol. 113, no. 16, pp. 6616–6621, 2009. View at Publisher · View at Google Scholar · View at Scopus
  154. P. Li, B. Ge, S. Zhang, S. Chen, Q. Zhang, and Y. Zhao, “CO2 capture by polyethylenimine-modified fibrous adsorbent,” Langmuir, vol. 24, no. 13, pp. 6567–6574, 2008. View at Publisher · View at Google Scholar · View at Scopus
  155. B. Aziz, N. Hedin, and Z. Bacsik, “Quantification of chemisorption and physisorption of carbon dioxide on porous silica modified by propylamines: effect of amine density,” Microporous and Mesoporous Materials, vol. 159, pp. 42–49, 2012. View at Google Scholar
  156. M. M. Maroto-Valer, Z. Tang, and Y. Zhang, “CO2 capture by activated and impregnated anthracites,” Fuel Processing Technology, vol. 86, no. 14-15, pp. 1487–1502, 2005. View at Publisher · View at Google Scholar · View at Scopus
  157. X. Xu, C. Song, B. G. Miller, and A. W. Scaroni, “Adsorption separation of carbon dioxide from flue gas of natural gas-fired boiler by a novel nanoporous “molecular basket” adsorbent,” Fuel Processing Technology, vol. 86, no. 14-15, pp. 1457–1472, 2005. View at Publisher · View at Google Scholar · View at Scopus
  158. X. Xu, C. Song, J. M. Andresen, B. G. Miller, and A. W. Scaroni, “Novel polyethylenimine-modified mesoporous molecular sieve of MCM-41 type as high-capacity adsorbent for CO2 capture,” Energy and Fuels, vol. 16, no. 6, pp. 1463–1469, 2002. View at Publisher · View at Google Scholar · View at Scopus
  159. J. Zhang, R. Singh, and P. A. Webley, “Alkali and alkaline-earth cation exchanged chabazite zeolites for adsorption based CO2 capture,” Microporous and Mesoporous Materials, vol. 111, no. 1–3, pp. 478–487, 2008. View at Publisher · View at Google Scholar · View at Scopus
  160. H. R. Abid, H. Tian, H.-M. Ang, M. O. Tade, C. E. Buckley, and S. Wang, “Nanosize Zr-metal organic framework (UiO-66) for hydrogen and carbon dioxide storage,” Chemical Engineering Journal, vol. 187, pp. 415–420, 2012. View at Publisher · View at Google Scholar · View at Scopus
  161. C. Chen, J. Kim, and W.-S. Ahn, “Efficient carbon dioxide capture over a nitrogen-rich carbon having a hierarchical micro-mesopore structure,” Fuel, vol. 95, pp. 360–364, 2012. View at Publisher · View at Google Scholar · View at Scopus
  162. M. G. Plaza, C. Pevida, B. Arias et al., “Application of thermogravimetric analysis to the evaluation of aminated solid sorbents for CO2 capture,” Journal of Thermal Analysis and Calorimetry, vol. 92, no. 2, pp. 601–606, 2008. View at Publisher · View at Google Scholar · View at Scopus
  163. A.-Y. Park, H. Kwon, A. J. Woo, and S.-J. Kim, “Layered double hydroxide surface modified with (3-aminopropyl) triethoxysilane by covalent bonding,” Advanced Materials, vol. 17, no. 1, pp. 106–109, 2005. View at Publisher · View at Google Scholar · View at Scopus
  164. N. S. Nhlapo, “Intercalation of fatty acids into layered double hydroxides,” Tech. Rep., Department of Chemistery Faculty of Natural and Agricultural sciences South Africa, University of Pretoria, 2008. View at Google Scholar
  165. M. S. Shafeeyan, W. M. A. Wan Daud, A. Houshmand, and A. Arami-Niya, “The application of response surface methodology to optimize the amination of activated carbon for the preparation of carbon dioxide adsorbents,” Fuel, vol. 94, pp. 465–472, 2012. View at Publisher · View at Google Scholar · View at Scopus
  166. M. Clausse, J. Merel, and F. Meunier, “Numerical parametric study on CO2 capture by indirect thermal swing adsorption,” International Journal of Greenhouse Gas Control, vol. 5, no. 5, pp. 1206–1213, 2011. View at Publisher · View at Google Scholar · View at Scopus
  167. L. Wang, Z. Liu, P. Li, J. Yu, and A. E. Rodrigues, “Experimental and modeling investigation on post-combustion carbon dioxide capture using zeolite 13X-APG by hybrid VTSA process,” Chemical Engineering Journal, vol. 197, pp. 151–161, 2012. View at Google Scholar
  168. A. R. Kulkarni and D. S. Sholl, “Analysis of Equilibrium-Based TSA Processes for Direct Capture of CO2from Air,” Industrial & Engineering Chemistry Research, vol. 51, pp. 8631–8645, 2012. View at Google Scholar
  169. J. Merel, M. Clausse, and F. Meunier, “Experimental investigation on CO2 post-combustion capture by indirect thermal swing adsorption using 13X and 5A zeolites,” Industrial and Engineering Chemistry Research, vol. 47, no. 1, pp. 209–215, 2008. View at Publisher · View at Google Scholar · View at Scopus
  170. S. Lucas, M. P. Calvo, C. Palencia, and M. J. Cocero, “Mathematical model of supercritical CO2 adsorption on activated carbon: effect of operating conditions and adsorption scale-up,” Journal of Supercritical Fluids, vol. 32, no. 1–3, pp. 193–201, 2004. View at Publisher · View at Google Scholar · View at Scopus
  171. C. Hoeger, C. Bence, S. S. Burt, A. Baxter, and L. Baxter, “Cryogenic CO2 capture for improved efficiency at reduced cost,” in Proceedings of the AIChE Annual Meeting, November 2010. View at Scopus
  172. S. Burt, A. Baxter, and L. Baxter, “Cryogenic CO2 capture to control climate change emissions,” in Proceedings of the 34th International Technical Conference on Clean Coal & Fuel Systems, May 2009.
  173. M. J. Tuinier, H. P. Hamers, and M. van Sint Annaland, “Techno-economic evaluation of cryogenic CO2 capture-A comparison with absorption and membrane technology,” International Journal of Greenhouse Gas Control, vol. 5, no. 6, pp. 1559–1565, 2011. View at Publisher · View at Google Scholar · View at Scopus
  174. A. Hart and N. Gnanendran, “Cryogenic CO2 capture in natural gas,” Energy Procedia, vol. 1, pp. 697–706, 2009. View at Google Scholar
  175. G. Xu, L. Li, Y. Yang, L. Tian, T. Liu, and K. Zhang, “A novel CO2 cryogenic liquefaction and separation system,” Energy, vol. 42, pp. 522–529, 2012. View at Publisher · View at Google Scholar · View at Scopus
  176. B. Shimekit and H. Mukhtar, “Natural gas purification technologies-major advances for CO2 separation and future directions,” in Advances in Natural Gas Technology, A. M. Hamid, Ed., pp. 235–270, InTech, China, 2012. View at Google Scholar
  177. M. T. Ravanchi, S. Sahebdelfar, and F. T. Zangeneh, “Carbon dioxide sequestration in petrochemical industries with the aim of reduction in greenhouse gas emissions,” Frontiers of Chemical Engineering in China, vol. 5, no. 2, pp. 173–178, 2011. View at Publisher · View at Google Scholar · View at Scopus
  178. R. P. Lively, W. J. Koros, and J. R. Johnson, “Enhanced cryogenic CO2 capture using dynamically operated low-cost fiber beds,” Chemical Engineering Science, vol. 71, pp. 97–103, 2012. View at Publisher · View at Google Scholar · View at Scopus
  179. D. Clodic, R. El Hitti, M. Younes, A. Bill, and F. Casier, “CO2capture by anti-sublimation thermo-economic process evaluation,” in Proceedings of the 4th Annual Conference on Carbon Capture & Sequestration, pp. 2–5, Alexandria, Va, USA, 2005.
  180. J.-M. Amann, M. Kanniche, and C. Bouallou, “Natural gas combined cycle power plant modified into an O2/CO2 cycle for CO2 capture,” Energy Conversion and Management, vol. 50, no. 3, pp. 510–521, 2009. View at Publisher · View at Google Scholar · View at Scopus
  181. C.-F. Song, Y. Kitamura, S.-H. Li, and K. Ogasawara, “Design of a cryogenic CO2 capture system based on Stirling coolers,” International Journal of Greenhouse Gas Control, vol. 7, pp. 107–114, 2012. View at Publisher · View at Google Scholar · View at Scopus
  182. M. J. Tuinier, M. van Sint Annaland, and J. A. M. Kuipers, “A novel process for cryogenic CO2 capture using dynamically operated packed beds-An experimental and numerical study,” International Journal of Greenhouse Gas Control, vol. 5, no. 4, pp. 694–701, 2011. View at Publisher · View at Google Scholar · View at Scopus
  183. P. Chiesa, S. Campanari, and G. Manzolini, “CO2 cryogenic separation from combined cycles integrated with molten carbonate fuel cells,” International Journal of Hydrogen Energy, vol. 36, no. 16, pp. 10355–10365, 2011. View at Publisher · View at Google Scholar · View at Scopus
  184. E. Favre, “Membrane processes and postcombustion carbon dioxide capture: challenges and prospects,” Chemical Engineering Journal, vol. 171, no. 3, pp. 782–793, 2011. View at Publisher · View at Google Scholar · View at Scopus
  185. B. Freeman and Y. Yampolskii, Membrane Gas Separation, John Wiley & Sons, 2010.
  186. R. Bounaceur, N. Lape, D. Roizard, C. Vallieres, and E. Favre, “Membrane processes for post-combustion carbon dioxide capture: a parametric study,” Energy, vol. 31, no. 14, pp. 2220–2234, 2006. View at Publisher · View at Google Scholar · View at Scopus
  187. D. Aaron and C. Tsouris, “Separation of CO2 from flue gas: a review,” Separation Science and Technology, vol. 40, no. 1–3, pp. 321–348, 2005. View at Publisher · View at Google Scholar · View at Scopus
  188. A. Xu, A. Yang, S. Young, D. deMontigny, and P. Tontiwachwuthikul, “Effect of internal coagulant on effectiveness of polyvinylidene fluoride membrane for carbon dioxide separation and absorption,” Journal of Membrane Science, vol. 311, no. 1-2, pp. 153–158, 2008. View at Publisher · View at Google Scholar · View at Scopus
  189. T.-L. Chew, A. L. Ahmad, and S. Bhatia, “Ordered mesoporous silica (OMS) as an adsorbent and membrane for separation of carbon dioxide (CO2),” Advances in Colloid and Interface Science, vol. 153, no. 1-2, pp. 43–57, 2010. View at Publisher · View at Google Scholar · View at Scopus
  190. C. A. Scholes, G. Q. Chen, G. W. Stevens, and S. E. Kentish, “Nitric oxide and carbon monoxide permeation through glassy polymeric membranes for carbon dioxide separation,” Chemical Engineering Research and Design, vol. 89, no. 9, pp. 1730–1736, 2011. View at Publisher · View at Google Scholar · View at Scopus
  191. C. A. Scholes, S. E. Kentish, and G. W. Stevens, “Carbon dioxide separation through polymeric membrane systems for flue gas applications,” Recent Patents on Chemical Engineering, vol. 1, pp. 52–66, 2008. View at Google Scholar
  192. L. A. El-Azzami and E. A. Grulke, “Carbon dioxide separation from hydrogen and nitrogen by fixed facilitated transport in swollen chitosan membranes,” Journal of Membrane Science, vol. 323, no. 2, pp. 225–234, 2008. View at Publisher · View at Google Scholar · View at Scopus
  193. C. E. Powell and G. G. Qiao, “Polymeric CO2/N2 gas separation membranes for the capture of carbon dioxide from power plant flue gases,” Journal of Membrane Science, vol. 279, no. 1-2, pp. 1–49, 2006. View at Publisher · View at Google Scholar · View at Scopus
  194. L. A. El-Azzami and E. A. Grulke, “Carbon dioxide separation from hydrogen and nitrogen: facilitated transport in arginine salt-chitosan membranes,” Journal of Membrane Science, vol. 328, no. 1-2, pp. 15–22, 2009. View at Publisher · View at Google Scholar · View at Scopus
  195. G. Xomeritakis, C.-Y. Tsai, and C. J. Brinker, “Microporous sol-gel derived aminosilicate membrane for enhanced carbon dioxide separation,” Separation and Purification Technology, vol. 42, no. 3, pp. 249–257, 2005. View at Publisher · View at Google Scholar · View at Scopus
  196. E. Favre, “Carbon dioxide recovery from post-combustion processes: can gas permeation membranes compete with absorption?” Journal of Membrane Science, vol. 294, no. 1-2, pp. 50–59, 2007. View at Publisher · View at Google Scholar · View at Scopus
  197. A. Julbe, “Chapter 6 Zeolite membranes—synthesis, characterization and application,” Studies in Surface Science and Catalysis, vol. 168, pp. 181–219, 2007. View at Publisher · View at Google Scholar · View at Scopus
  198. D. W. Shin, S. H. Hyun, C. H. Cho, and M. H. Han, “Synthesis and CO2/N2 gas permeation characteristics of ZSM-5 zeolite membranes,” Microporous and Mesoporous Materials, vol. 85, no. 3, pp. 313–323, 2005. View at Publisher · View at Google Scholar · View at Scopus
  199. M. Anderson and Y. S. Lin, “Carbonate-ceramic dual-phase membrane for carbon dioxide separation,” Journal of Membrane Science, vol. 357, no. 1-2, pp. 122–129, 2010. View at Publisher · View at Google Scholar · View at Scopus
  200. D. Shekhawat, D. R. Luebke, and H. W. Pennline, “A review of carbon dioxide selective membranes,” A Topical Report DOE/NETL-2003/1200, Department of Energy, National Energy Technology Laboratory, 2003. View at Google Scholar
  201. P. Kumar, S. Kim, J. Ida, and V. V. Guliants, “Polyethyleneimine-modified MCM-48 membranes: effect of water vapor and feed concentration on N2/CO2 selectivity,” Industrial and Engineering Chemistry Research, vol. 47, no. 1, pp. 201–208, 2008. View at Publisher · View at Google Scholar · View at Scopus
  202. T. C. Merkel, H. Lin, X. Wei, and R. Baker, “Power plant post-combustion carbon dioxide capture: an opportunity for membranes,” Journal of Membrane Science, vol. 359, no. 1-2, pp. 126–139, 2010. View at Publisher · View at Google Scholar · View at Scopus
  203. Y. Cai, Z. Wang, C. Yi, Y. Bai, J. Wang, and S. Wang, “Gas transport property of polyallylamine-poly(vinyl alcohol)/polysulfone composite membranes,” Journal of Membrane Science, vol. 310, no. 1-2, pp. 184–196, 2008. View at Publisher · View at Google Scholar · View at Scopus
  204. L. Deng, T.-J. Kim, and M.-B. Hägg, “Facilitated transport of CO2 in novel PVAm/PVA blend membrane,” Journal of Membrane Science, vol. 340, no. 1-2, pp. 154–163, 2009. View at Publisher · View at Google Scholar · View at Scopus
  205. X. Ren, J. Ren, H. Li, S. Feng, and M. Deng, “Poly (amide-6-b-ethylene oxide) multilayer composite membrane for carbon dioxide separation,” International Journal of Greenhouse Gas Control, vol. 8, pp. 111–120, 2012. View at Publisher · View at Google Scholar · View at Scopus
  206. L. Liu, A. Chakma, and X. Feng, “Preparation of hollow fiber poly(ether block amide)/polysulfone composite membranes for separation of carbon dioxide from nitrogen,” Chemical Engineering Journal, vol. 105, no. 1-2, pp. 43–51, 2004. View at Publisher · View at Google Scholar · View at Scopus
  207. A. Car, C. Stropnik, W. Yave, and K.-V. Peinemann, “PEG modified poly(amide-b-ethylene oxide) membranes for CO2 separation,” Journal of Membrane Science, vol. 307, no. 1, pp. 88–95, 2008. View at Publisher · View at Google Scholar · View at Scopus
  208. W. Yave, A. Car, and K.-V. Peinemann, “Nanostructured membrane material designed for carbon dioxide separation,” Journal of Membrane Science, vol. 350, no. 1-2, pp. 124–129, 2010. View at Publisher · View at Google Scholar · View at Scopus
  209. Y. Gu and S. T. Oyama, “High molecular permeance in a poreless ceramic membrane,” Advanced Materials, vol. 19, no. 12, pp. 1636–1640, 2007. View at Publisher · View at Google Scholar · View at Scopus
  210. M. Reif and R. Dittmeyer, “Porous, catalytically active ceramic membranes for gas-liquid reactions: a comparison between catalytic diffuser and forced through flow concept,” Catalysis Today, vol. 82, no. 1–4, pp. 3–14, 2003. View at Publisher · View at Google Scholar · View at Scopus
  211. K. Kusakabe, T. Kuroda, and S. Morooka, “Separation of carbon dioxide from nitrogen using ion-exchanged faujasite-type zeolite membranes formed on porous support tubes,” Journal of Membrane Science, vol. 148, no. 1, pp. 13–23, 1998. View at Publisher · View at Google Scholar · View at Scopus
  212. J. van den Bergh, W. Zhu, J. Gascon, J. A. Moulijn, and F. Kapteijn, “Separation and permeation characteristics of a DD3R zeolite membrane,” Journal of Membrane Science, vol. 316, no. 1-2, pp. 35–45, 2008. View at Publisher · View at Google Scholar · View at Scopus
  213. M. P. Bernal, J. Coronas, M. Menéndez, and J. Santamaría, “Separation of CO2/N2 mixtures using MFI-type zeolite membranes,” AIChE Journal, vol. 50, no. 1, pp. 127–135, 2004. View at Publisher · View at Google Scholar · View at Scopus
  214. Z. Rui, H. Ji, and Y. S. Lin, “Modeling and analysis of ceramic-carbonate dual-phase membrane reactor for carbon dioxide reforming with methane,” International Journal of Hydrogen Energy, vol. 36, no. 14, pp. 8292–8300, 2011. View at Publisher · View at Google Scholar · View at Scopus
  215. Z. Rui, M. Anderson, Y. S. Lin, and Y. Li, “Modeling and analysis of carbon dioxide permeation through ceramic-carbonate dual-phase membranes,” Journal of Membrane Science, vol. 345, no. 1-2, pp. 110–118, 2009. View at Publisher · View at Google Scholar · View at Scopus
  216. S. J. Metz, M. H. V. Mulder, and M. Wessling, “Gas-permeation properties of poly(ethylene oxide) poly(butylene terephthalate) block copolymers,” Macromolecules, vol. 37, no. 12, pp. 4590–4597, 2004. View at Publisher · View at Google Scholar · View at Scopus
  217. Z. Xu, J. Wang, W. Chen, and Y. Xu, “Separation and fixation of carbon dioxide using polymeric membrane contactor,” in Proceedings of the 1st National Conference on Carbon Sequestration, 2001.
  218. D. Dortmundt and K. Doshi, Recent Developments in CO2 Removal Membrane Technology, UOP LLC, 1999.
  219. C. A. Scholes, S. E. Kentish, and G. W. Stevens, “The effect of condensable minor components on the gas separation performance of polymeric membranes for carbon dioxide capture,” Energy Procedia, vol. 1, pp. 311–317, 2009. View at Google Scholar
  220. K. Hunger, N. Schmeling, H. B. Jeazet, C. Janiak, C. Staudt, and K. Kleinermanns, “Investigation of cross-linked and additive containing polymer materials for membranes with improved performance in pervaporation and gas separation,” Membrane, vol. 2, pp. 727–763, 2012. View at Google Scholar
  221. S. R. Reijerkerk, “Polyether based block copolymer membranes for CO2 separation,” in Science and Technology, University of Twente, Enschede, The Netherlands, 2010. View at Google Scholar
  222. A. L. B. Ahmad, Z. A. Jawad, S. C. Low, and H. S. Zein, “Prospect of mixed matrix membrane towards CO2Separation,” Journal of Membrane Science & Technology, vol. 2, article e110, 2012. View at Google Scholar
  223. C. A. Scholes, G. Q. Chen, G. W. Stevens, and S. E. Kentish, “Plasticization of ultra-thin polysulfone membranes by carbon dioxide,” Journal of Membrane Science, vol. 346, no. 1, pp. 208–214, 2010. View at Publisher · View at Google Scholar · View at Scopus
  224. N. Du, H. B. Park, G. P. Robertson et al., “Polymer nanosieve membranes for CO2-capture applications,” Nature Materials, vol. 10, no. 5, pp. 372–375, 2011. View at Publisher · View at Google Scholar · View at Scopus
  225. P. Uchytil, J. Schauer, R. Petrychkovych, K. Setnickova, and S. Y. Suen, “Ionic liquid membranes for carbon dioxide-methane separation,” Journal of Membrane Science, vol. 383, no. 1-2, pp. 262–271, 2011. View at Publisher · View at Google Scholar · View at Scopus
  226. O. G. Nik, X. Y. Chen, and S. Kaliaguine, “Amine-functionalized zeolite FAU/EMT-polyimide mixed matrix membranes for CO2/CH4 separation,” Journal of Membrane Science, vol. 379, no. 1-2, pp. 468–478, 2011. View at Publisher · View at Google Scholar · View at Scopus
  227. Y. C. Hudiono, T. K. Carlisle, J. E. Bara, Y. Zhang, D. L. Gin, and R. D. Noble, “A three-component mixed-matrix membrane with enhanced CO2 separation properties based on zeolites and ionic liquid materials,” Journal of Membrane Science, vol. 350, no. 1-2, pp. 117–123, 2010. View at Publisher · View at Google Scholar · View at Scopus
  228. A. Kovvali and G. Obuskovic, “Immobilized liquid membranes for CO2 separation',” in Proceedings of the Preprints of Symposia-American Chemical Society, pp. 665–667, Division of Fuel Chemistry, American Chemical Society, 2000.
  229. Z. Wang, L. E. K. Achenie, S. J. Khativ, and S. T. Oyama, “Simulation study of single-gas permeation of carbon dioxide and methane in hybrid inorganic-organic membrane,” Journal of Membrane Science, vol. 387-388, no. 1, pp. 30–39, 2012. View at Publisher · View at Google Scholar · View at Scopus
  230. S.-P. Yan, M.-X. Fang, W.-F. Zhang et al., “Experimental study on the separation of CO2 from flue gas using hollow fiber membrane contactors without wetting,” Fuel Processing Technology, vol. 88, no. 5, pp. 501–511, 2007. View at Publisher · View at Google Scholar · View at Scopus
  231. J.-L. Li and B.-H. Chen, “Review of CO2 absorption using chemical solvents in hollow fiber membrane contactors,” Separation and Purification Technology, vol. 41, no. 2, pp. 109–122, 2005. View at Publisher · View at Google Scholar · View at Scopus
  232. Y.-S. Kim and S.-M. Yang, “Absorption of carbon dioxide through hollow fiber membranes using various aqueous absorbents,” Separation and Purification Technology, vol. 21, no. 1-2, pp. 101–109, 2000. View at Publisher · View at Google Scholar · View at Scopus
  233. K. Sugiura, K. Takei, K. Tanimoto, and Y. Miyazaki, “The carbon dioxide concentrator by using MCFC,” Journal of Power Sources, vol. 118, no. 1-2, pp. 218–227, 2003. View at Publisher · View at Google Scholar · View at Scopus
  234. H. Herzog, “Assessing the feasibility of capturing CO2 from the air,” Tech. Rep., MIT Laboratory for Energy and the Environment, Massachusetts Institute of Techology, Cambridge, Mass, USA, 2003. View at Google Scholar
  235. M. R. M. Abu-Zahra, J. P. M. Niederer, P. H. M. Feron, and G. F. Versteeg, “CO2 capture from power plants. Part II. A parametric study of the economical performance based on mono-ethanolamine,” International Journal of Greenhouse Gas Control, vol. 1, no. 2, pp. 135–142, 2007. View at Publisher · View at Google Scholar · View at Scopus