TY - JOUR A2 - Zhang, Z. A2 - Fujiwara, T. AU - Zaman, M. R. AU - Islam, M. T. AU - Misran, N. AU - Yatim, Baharudin PY - 2014 DA - 2014/04/06 TI - Analysis of Glass-Reinforced Epoxy Material for Radio Frequency Resonator SP - 831435 VL - 2014 AB - A radio frequency (RF) resonator using glass-reinforced epoxy material for C and X band is proposed in this paper. Microstrip line technology for RF over glass-reinforced epoxy material is analyzed. Coupling mechanism over RF material and parasitic coupling performance is explained utilizing even and odd mode impedance with relevant equivalent circuit. Babinet’s principle is deployed to explicate the circular slot ground plane of the proposed resonator. The resonator is designed over four materials from different backgrounds which are glass-reinforced epoxy, polyester, gallium arsenide (GaAs), and rogers RO 4350B. Parametric studies and optimization algorithm are applied over the geometry of the microstrip resonator to achieve dual band response for C and X band. Resonator behaviors for different materials are concluded and compared for the same structure. The final design is fabricated over glass-reinforced epoxy material. The fabricated resonator shows a maximum directivity of 5.65 dBi and 6.62 dBi at 5.84 GHz and 8.16 GHz, respectively. The lowest resonance response is less than −20 dB for C band and −34 dB for X band. The resonator is prototyped using LPKF (S63) drilling machine to study the material behavior. SN - 2356-6140 UR - https://doi.org/10.1155/2014/831435 DO - 10.1155/2014/831435 JF - The Scientific World Journal PB - Hindawi Publishing Corporation KW - ER -