Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 831435, 10 pages
http://dx.doi.org/10.1155/2014/831435
Research Article

Analysis of Glass-Reinforced Epoxy Material for Radio Frequency Resonator

1Institute of Space Science (ANGKASA), 43600 UKM Bangi, Malaysia
2Department of Electrical, Electronic and Systems Engineering, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Malaysia

Received 7 January 2014; Accepted 29 January 2014; Published 6 April 2014

Academic Editors: T. Fujiwara and Z. Zhang

Copyright © 2014 M. R. Zaman et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Hu, K. Gui, Y. Yang, S. Dong, and X. Zhang, “Effect of SiC content on the ablation and oxidation behavior of ZrB2-based ultra high temperature ceramic composites,” Materials, vol. 6, no. 5, pp. 1730–1744, 2013. View at Publisher · View at Google Scholar
  2. T. Zervos, A. A. Alexandridis, F. Lazarakis et al., “Design of a polarisation reconfigurable patch antenna using ferrimagnetic materials,” IET Microwaves, Antennas & Propagation, vol. 6, no. 2, pp. 158–164, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Mehdipour, T. A. Denidni, A. Sebak, C. W. Trueman, I. D. Rosca, and S. V. Hoa, “Nonmetallic dielectric resonator antenna using carbon nanotube composite materials,” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 1293–1295, 2012. View at Publisher · View at Google Scholar
  4. A. O. Karilainen, P. M. T. Ikonen, C. R. Simovski et al., “Experimental studies on antenna miniaturisation using magneto-dielectric and dielectric materials,” IET Microwaves, Antennas & Propagation, vol. 5, no. 4, pp. 495–502, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. L. Huitema, T. Reveyrand, J. L. Mattei, E. Arnaud, C. Decroze, and T. Monediere, “Frequency tunable antenna using a magneto-dielectric material for DVB-H application,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 9, pp. 4456–4466, 2013. View at Publisher · View at Google Scholar
  6. Y. Cheon, J. Lee, and J. Lee, “Quad-band monopole antenna including LTE 700 MHz with magneto-dielectric material,” IEEE Antennas and Wireless Propagation Letters, vol. 11, pp. 137–140, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. I. Yarovsky and E. Evans, “Computer simulation of structure and properties of crosslinked polymers: application to epoxy resins,” Polymer, vol. 43, no. 3, pp. 963–969, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. M. H. Ullah, M. T. Islam, J. S. Mandeep, and N. Misran, “A new double L-shaped multiband patch antenna on a polymer resin material substrate,” Applied Physics A, vol. 110, no. 1, pp. 199–205, 2013. View at Publisher · View at Google Scholar
  9. C. Vanderpan, J. Bradley, and P. E. Schmidt, “Standards Technical Panel (STP) Meeting (FR4 Reclassification),” in Standards Technical Panel Chairman, Global Standards, UL, 2011.
  10. J. Coonrod, “Understanding when to use FR-4 or high frequency laminates,” 2011.
  11. J. R. Aguilar, M. Beadle, P. T. Thompson, and M. W. Shelley, “The microwave and RF characteristics of FR4 substrates,” in Proceedings of the IEE Colloquium on Low Cost Antenna Technology, pp. 1–6, London, UK, February 1998. View at Publisher · View at Google Scholar
  12. H. Urey, S. Holmstrom, and A. D. Yalcinkaya, “Electromagnetically actuated FR4 scanners,” IEEE Photonics Technology Letters, vol. 20, no. 1, pp. 30–32, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. M. N. Sadiku, Elements of Electromagnetics, vol. 428, Oxford University Press, Oxford, UK, 2001.
  14. D. M. Pozar, Microwave Engineering, Wiley, 2009.
  15. K. C. Gupta, R. Garg, I. J. Bahl, and P. Bhartia, Microstrip Lines and Slotlines, vol. 2, Artech House, Boston, Mass, USA, 1996.
  16. J.-J. Tiang, M. T. Islam, N. Misran, and J. S. Mandeep, “Circular microstrip slot antenna for dual-frequency RFID application,” Progress in Electromagnetics Research, vol. 120, pp. 499–512, 2011. View at Google Scholar · View at Scopus
  17. C.-J. Hwang, L. B. Lok, I. G. Thayne, and K. Elgaid, “A wide bandpass filter with defected ground structure for wide out-of-band suppression,” in Proceedings of the Asia Pacific Microwave Conference (APMC '09), pp. 2018–2021, Singapore, December 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. M. Kempa, Z. E. Kazanivsky, H. H. Masyutin, V. I. Hnativ, and N. A. Naumets, “Specific features of wide-band microwave filters constructive design,” in Proceedings of the 17th International Crimean Conference on Microwave and Telecommunication Technology (CriMiCo '07), pp. 481–483, Crimea, Ukraine, September 2007. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Wu, “Improved intelligent optimization algorithm for the application of feedback design,” Journal of Convergence Information Technology, vol. 6, no. 9, pp. 153–158, 2011. View at Publisher · View at Google Scholar · View at Scopus