Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 869120, 14 pages
http://dx.doi.org/10.1155/2014/869120
Research Article

A Comparison of Central Composite Design and Taguchi Method for Optimizing Fenton Process

Chemical Engineering Department, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia

Received 21 April 2014; Revised 22 July 2014; Accepted 6 August 2014; Published 27 August 2014

Academic Editor: Seval Kutlu Akal Solmaz

Copyright © 2014 Anam Asghar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [27 citations]

The following is the list of published articles that have cited the current article.

  • Mushtaq Ahmad, and A.R. Abdul Aziz, “Elemental Distribution and Porosity Enhancement in Advanced Nano Bimetallic Catalyst,” Powder Technology, 2015. View at Publisher · View at Google Scholar
  • Mushtaq Ahmad, Anam Asghar, Abdul Aziz Abdul Raman, and Wan Mohd Ashri Wan Daud, “Enhancement of Treatment Efficiency of Recalcitrant Wastewater Containing Textile Dyes Using a Newly Developed Iron Zeolite Socony Mobil-5 Heterogeneo,” Plos One, vol. 10, no. 10, 2015. View at Publisher · View at Google Scholar
  • Anam Asghar, Addin Salihoudin, Abdul Aziz Abdul Raman, and Wan Mohd Ashri Wan Daud, “ Cathode modification to enhance the performance of in-situ fenton oxidation in microbial fuel cells ,” Environmental Progress & Sustainable Energy, 2016. View at Publisher · View at Google Scholar
  • Mohamadreza Massoudinejad, Mansour Ghaderpoori, Abbas Shahsavani, and Mostafa M. Amini, “Adsorption of fluoride over a metal organic framework Uio-66 functionalized with amine groups and optimization with response surface methodology,” Journal of Molecular Liquids, vol. 221, pp. 279–286, 2016. View at Publisher · View at Google Scholar
  • Monireh Majlesi, and Yalda Hashempour, “Removal of 4-chlorophenol from aqueous solution by granular activated carbon/nanoscale zero valent iron based on Response Surface Modeling,” Archives of Environmental Protection, vol. 43, no. 4, pp. 13–25, 2016. View at Publisher · View at Google Scholar
  • Mushtaq Ahmad, Rafida Farhana, Abdul Aziz Abdul Raman, and Suresh K. Bhargava, “Synthesis and activity evaluation of heterometallic nano oxides integrated ZSM-5 catalysts for palm oil cracking to produce biogasoline,” Energy Conversion and Management, vol. 119, pp. 352–360, 2016. View at Publisher · View at Google Scholar
  • Nadeem Akhtar, Dinesh Goyal, and Arun Goyal, “Characterization of microwave-alkali-acid pre-treated rice straw for optimization of ethanol production via simultaneous saccharification and fermentation (SSF),” Energy Conversion and Management, 2016. View at Publisher · View at Google Scholar
  • Nor Adilla Rashidi, and Suzana Yusup, “A Review on Recent Technological Advancement in the Activated Carbon Production from Oil Palm Wastes,” Chemical Engineering Journal, 2016. View at Publisher · View at Google Scholar
  • Mutiu Kolade Amosa, and Thokozani Majozi, “GAMS supported optimization and predictability study of a multi-objective adsorption process with conflicting regions of optimal operating conditions,” Computers & Chemical Engineering, vol. 94, pp. 354–361, 2016. View at Publisher · View at Google Scholar
  • Abdul Amir H. Kadhum, Ahmed A. Al-Amiery, Ahmed J. Mohammed, and Muneer M. Ba-Abbad, “Optimization of solar photocatalytic degradation of chloroxylenol using TiO2, Er3+/TiO2, and Ni2+/TiO2 via the taguchi orthogonal array technique,” Catalysts, vol. 6, no. 10, 2016. View at Publisher · View at Google Scholar
  • Paran Gani, Norshuhaila Mohamed Sunar, Hazel Matias-Peralta, Ab Aziz Abdul Latiff, and Siti Fatimah Zaharah Mohamad Fuzi, “ Growth of microalgae Botryococcus sp. in domestic wastewater and application of statistical analysis for the optimization of flocculation using alum and chitosan ,” Preparative Biochemistry and Biotechnology, vol. 47, no. 4, pp. 333–341, 2016. View at Publisher · View at Google Scholar
  • P.H. Sreeja, and K.J. Sosamony, “A Comparative Study of Homogeneous and Heterogeneous Photo-fenton Process for Textile Wastewater Treatment,” Procedia Technology, vol. 24, pp. 217–223, 2016. View at Publisher · View at Google Scholar
  • Archina Buthiyappan, Abdul Aziz Abdul Raman, and Wan Mohd Ashri Wan Daud, “Development of an advanced chemical oxidation wastewater treatment system for the batik industry in Malaysia,” RSC Adv., vol. 6, no. 30, pp. 25222–25241, 2016. View at Publisher · View at Google Scholar
  • Mushtaq Ahmad, Abdul Aziz Abdul Raman, Wan Jefrey Basirun, and Suresh K. Bhargava, “Treatment of textile effluent containing recalcitrant dyes using MOF derived Fe-ZSM-5 heterogeneous catalyst,” RSC Adv., vol. 6, no. 56, pp. 51078–51088, 2016. View at Publisher · View at Google Scholar
  • Sama Azadi, Ayoub Karimi-Jashni, and Sirus Javadpour, “Photocatalytic Treatment of Landfill Leachate Using W-Doped TiO2 Nanoparticles,” Journal of Environmental Engineering, vol. 143, no. 9, pp. 04017049, 2017. View at Publisher · View at Google Scholar
  • Ö. Gökkuş, N. Yıldız, A. S. Koparal, and Y. Ş. Yıldız, “Evaluation of the effect of oxygen on electro-Fenton treatment performance for real textile wastewater using the Taguchi approach,” International Journal of Environmental Science and Technology, 2017. View at Publisher · View at Google Scholar
  • Sharin Ab Ghani, Nor Asiah Muhamad, Zulkarnain Ahmad Noorden, Hidayat Zainuddin, and Asimi Ana Ahmad, “Multi-response optimization of the properties of natural ester oil with mixed antioxidants using taguchi-based methodology,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 24, no. 3, pp. 1674–1684, 2017. View at Publisher · View at Google Scholar
  • Jamshid Behin, Abbas Akbari, Mohsen Mahmoudi, and Mehdi Khajeh, “Sodium hypochlorite as an alternative to Hydrogen peroxide in Fenton process for industrial scale,” Water Research, 2017. View at Publisher · View at Google Scholar
  • Anam Asghar, Abdul Aziz Abdul Raman, Wan Mohd Ashri Wan Daud, Mushtaq Ahmad, and Sharif Uddin Bin Md Zain, “Effect of nitrogen doping on graphite cathode for hydrogen peroxide production and power generation in MFC,” Journal of the Taiwan Institute of Chemical Engineers, 2017. View at Publisher · View at Google Scholar
  • Norwahyu Jusoh, Yin Fong Yeong, Kok Keong Lau, and Azmi M. Shariff, “Transport properties of mixed matrix membranes encompassing zeolitic imidazolate framework 8 (ZIF-8) nanofiller and 6FDA-durene polymer: Optimization of process variables for the separation of CO 2 from CH 4,” Journal of Cleaner Production, vol. 149, pp. 80–95, 2017. View at Publisher · View at Google Scholar
  • Anam Asghar, Abdul Aziz Abdul Raman, and Wan Mohd Ashri Wan Daud, “Sequential Optimization for Minimizing Material Cost and Treatment Time of Fenton Oxidation for Textile Wastewater Treatment,” Chemical Engineering Communications, 2017. View at Publisher · View at Google Scholar
  • Anam Asghar, Abdul Aziz Abdul Raman, and Wan Mohd Ashri Wan Daud, “ In situ production of hydrogen peroxide in a microbial fuel cell for recalcitrant wastewater treatment ,” Journal of Chemical Technology & Biotechnology, 2017. View at Publisher · View at Google Scholar
  • Jaleh Varshosaz, Ali Jahanian, Ahmad Soleymani, and Amir Khajavinia, “Poly (butylene adipate- co -terephthalate) electrospun nanofibers loaded with 5-fluorouracil and curcumin in treatment of colorectal cancer cells,” Polymer Testing, 2017. View at Publisher · View at Google Scholar
  • Omar I. Awad, R. Mamat, Obed M. Ali, W.H. Azmi, K. Kadirgama, I.M. Yusri, A.M. Leman, and T. Yusaf, “Response surface methodology (RSM) based multi-objective optimization of fusel oil -gasoline blends at different water content in SI engine,” Energy Conversion and Management, vol. 150, pp. 222–241, 2017. View at Publisher · View at Google Scholar
  • Archina Buthiyappan, Abdul Aziz Abdul Raman, Meysam Davoody, and Wan Mohd Ashri Wan Daud, “Parametric Study and Process Evaluation of Fenton Oxidation: Application of Sequential Response Surface Methodology and Adaptive Neuro-Fuzzy Inference System Computing Technique,” Chemical Engineering Communications, vol. 204, no. 6, pp. 658–676, 2017. View at Publisher · View at Google Scholar
  • Abdullah Yahia Alfaify, James Hughes, and Keith Ridgway, “Critical evaluation of the pulsed selective laser melting process when fabricating Ti64 parts using a range of particle size distributions,” Additive Manufacturing, vol. 19, pp. 197–204, 2018. View at Publisher · View at Google Scholar
  • Wahyudin, Angel Kharisma, Richard Dimas Julian Murphiyanto, Muhammad Kevin Perdana, and Tota Pirdo Kasih, “Application of Taguchi method and ANOVA in the optimization of dyeing process on cotton knit fabric to reduce re-dyeing process,” IOP Conference Series: Earth and Environmental Science, vol. 109, pp. 012023, 2018. View at Publisher · View at Google Scholar