Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2015, Article ID 132843, 15 pages
http://dx.doi.org/10.1155/2015/132843
Research Article

Sensorless Load Torque Estimation and Passivity Based Control of Buck Converter Fed DC Motor

DEEE, Anna University, Chennai 600 025, India

Received 15 December 2014; Revised 11 February 2015; Accepted 19 February 2015

Academic Editor: Stanislaw Migorski

Copyright © 2015 S. Ganesh Kumar and S. Hosimin Thilagar. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Lee, C. Choi, and W. Lee, “Estimation of load torque for motorized seat belt system with reduced-order observer,” in Proceedings of the 11th International Conference on Control, Automation and Systems (ICCAS '11), pp. 571–574, October 2011. View at Scopus
  2. B. Ugurlu, M. Nishimura, K. Hyodo, M. Kawanishi, and T. Narikiyo, “A framework for sensorless torque estimation and control in wearable exoskeletons,” in Proceedings of the 12th IEEE International Workshop on Advanced Motion Control (AMC '12), March 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Linares-Flores, J. Reger, and H. Sira-Ramírez, “Load torque estimation and passivity-based control of a boost-converter/DC-motor combination,” IEEE Transactions on Control Systems Technology, vol. 18, no. 6, pp. 1398–1405, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Linares-Flores, H. Sira-Ramírez, E. Yescas-Mendoza, and J. J. Vásquez-Sanjuan, “A comparison between the algebraic and the reduced order observer approaches for on-line load torque estimation in a unit power factor rectifier-DC motor system,” Asian Journal of Control, vol. 14, no. 1, pp. 45–57, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  5. A. Gensior, H. Sira-Ramírez, J. Rudolph, and H. Güldner, “On some nonlinear current controllers for three-phase boost rectifiers,” IEEE Transactions on Industrial Electronics, vol. 56, no. 2, pp. 360–370, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Linares-Flores, H. Sira-Ramírez, E. F. Cuevas-López, and M. A. Contreras-Ordaz, “Sensorless passivity based control of a DC motor via a solar powered sepic converter-full bridge combination,” Journal of Power Electronics, vol. 11, no. 5, pp. 743–750, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. H. Komurcugil, “Steady-state analysis and passivity-based control of single-phase PWM current-source inverters,” IEEE Transactions on Industrial Electronics, vol. 57, no. 3, pp. 1026–1030, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Tofighi and M. Kalantar, “Power management of PV/battery hybrid power source via passivity-based control,” Renewable Energy, vol. 36, no. 9, pp. 2440–2450, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. M.-Y. Wei, T.-H. Liu, and C.-K. Lin, “Design and implementation of a passivity-based controller for sensorless synchronous reluctance motor drive systems,” IET Electric Power Applications, vol. 5, no. 4, pp. 335–349, 2011. View at Publisher · View at Google Scholar
  10. T. Voß and J. M. Scherpen, “Stabilization and shape control of a 1D piezoelectric Timoshenko beam,” Automatica, vol. 47, no. 12, pp. 2780–2785, 2011. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  11. A. F. Villaverde, A. B. Blas, J. Carrasco, and A. B. Torrico, “Reset control for passive bilateral teleoperation,” IEEE Transactions on Industrial Electronics, vol. 58, no. 7, pp. 3037–3045, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. A. L. Fradkov and B. Andrievsky, “Passification-based robust flight control design,” Automatica, vol. 47, no. 12, pp. 2743–2748, 2011. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  13. S. G. Kumar and S. H. Thilagar, “Soft sensing of speed in load torque estimation for boost converter fed DC motor,” in Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society (IECON '13), pp. 3758–3763, Vienna, Austria, November 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Sira-Ramírez and R. Silva-Ortigoza, Control Design Techniques in Power Electronics Devices, Springer, London, UK, 2006.
  15. D. Liberzon, Switching in Systems and Control, Birkhäuser, Boston, Mass, USA, 2003. View at Publisher · View at Google Scholar · View at MathSciNet
  16. Q. Feng, R. M. Nelms, and J. Y. Hung, “Posicast-based digital control of the buck converter,” IEEE Transactions on Industrial Electronics, vol. 53, no. 3, pp. 759–767, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. K. L. Lian, “Derivation of a small-signal harmonic model for closed-loop power converters based on the state-variable sensitivity method,” IEEE Transactions on Circuits and Systems. I. Regular Papers, vol. 59, no. 4, pp. 833–845, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  18. B. K. H. Wong, H. S. H. Chung, and S. T. S. Lee, “Computation of the cycle state-variable sensitivity matrix of PWM dc/dc converters and its applications,” IEEE Transactions on Circuits & Systems I: Fundamental Theory & Applications, vol. 47, no. 10, pp. 1542–1548, 2000. View at Publisher · View at Google Scholar · View at Scopus
  19. U. Ribes-Mallada, R. Leyva, and P. Garcés, “Sensitivity analysis in Dc-Dc converter optimal design,” in Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE '11), pp. 358–364, June 2011. View at Publisher · View at Google Scholar · View at Scopus