Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2015 (2015), Article ID 864389, 10 pages
http://dx.doi.org/10.1155/2015/864389
Research Article

Three-Dimensional Finite Element Analysis of Anterior Two-Unit Cantilever Resin-Bonded Fixed Dental Prostheses

1Department of Restorative Dentistry and Endodontology, Dental School, Ghent University Hospital, Ghent University, De Pintelaan 185/P8, 9000 Gent, Belgium
2Department of Biomaterials Science, BioCity Turku Biomaterials Research Program, Institute of Dentistry, University of Turku, Lemminkäisenkatu 2, 20520 Turku, Finland
3Department of Crown and Bridge, School of Life Dentistry at Tokyo, The Nippon Dental University, 1-9-20 Fujimi, Chiyoda-ku, Tokyo 102-8158, Japan
4Department of Dental Materials Science, Academic Centre for Dentistry Amsterdam (ACTA), University of Amsterdam and VU University Amsterdam, Mahlerlaan 3004, 1081 LA Amsterdam, Netherlands

Received 15 July 2014; Accepted 21 August 2014

Academic Editor: Samir Nammour

Copyright © 2015 Filip Keulemans et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. O. El-Mowafy and M. H. M. Rubo, “Resin-bonded fixed partial dentures: a literature review with presentation of a novel approach,” International Journal of Prosthodontics, vol. 13, no. 6, pp. 460–467, 2000. View at Google Scholar · View at Scopus
  2. K. A. Durey, P. J. Nixon, S. Robinson, and M. F. W.-Y. Chan, “Resin bonded bridges: techniques for success,” The British Dental Journal, vol. 211, no. 3, pp. 113–118, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. B. E. Pjetursson, W. C. Tan, K. Tan, U. Brägger, M. Zwahlen, and N. P. Lang, “A systematic review of the survival and complication rates of resin-bonded bridges after an observation period of at least 5 years,” Clinical Oral Implants Research, vol. 19, no. 2, pp. 131–141, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. A. van Dalen, A. J. Feilzer, and C. J. Kleverlaan, “A literature review of two-unit cantilevered FPDs,” International Journal of Prosthodontics, vol. 17, no. 3, pp. 281–284, 2004. View at Google Scholar · View at Scopus
  5. M. G. Botelho, A. W. K. Chan, E. Y. L. Yiu, and E. T. P. Tse, “Longevity of two-unit cantilevered resin-bonded fixed partial dentures,” The American Journal of Dentistry, vol. 15, no. 5, pp. 295–299, 2002. View at Google Scholar · View at Scopus
  6. M. G. Botelho, K. C. M. Leung, H. Ng, and K. Chan, “A retrospective clinical evaluation of two-unit cantilevered resin-bonded fixed partial dentures,” Journal of the American Dental Association, vol. 137, no. 6, pp. 783–788, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. A. W. K. Chan and I. E. Barnes, “A prospective study of cantilever resin-bonded bridges: an intial report,” Australian Dental Journal, vol. 45, no. 1, pp. 31–36, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Djemal, D. Setchell, P. King, and J. Wickens, “Long-term survival characteristics of 832 resin-retained bridges and splints provided in a post-graduate teaching hospital between 1978 and 1993,” Journal of Oral Rehabilitation, vol. 26, no. 4, pp. 302–320, 1999. View at Publisher · View at Google Scholar · View at Scopus
  9. D. L. Hussey and G. J. Linden, “The clinical performance of cantilevered resin-bonded bridgework,” Journal of Dentistry, vol. 24, no. 4, pp. 251–256, 1996. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Sasse and M. Kern, “All-ceramic resin-bonded fixed dental prostheses: treatment planning, clinical procedures, and outcome,” Quintessence International, vol. 45, pp. 291–297, 2014. View at Google Scholar
  11. M. Kern and M. Sasse, “Ten-year survival of anterior all-ceramic resin-bonded fixed dental prostheses,” The Journal of Adhesive Dentistry, vol. 13, no. 5, pp. 407–410, 2011. View at Google Scholar · View at Scopus
  12. M. Botelho, “Resin-bonded prostheses: the current state of development,” Quintessence International, vol. 30, no. 8, pp. 525–534, 1999. View at Google Scholar · View at Scopus
  13. G. Schmalz and P. Garhammer, “Biological interactions of dental cast alloys with oral tissues,” Dental Materials, vol. 18, no. 5, pp. 396–406, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Muris, R. J. Scheper, C. J. Kleverlaan et al., “Palladium-based dental alloys are associated with oral disease and palladium-induced immune responses,” Contact Dermatitis, vol. 71, no. 2, pp. 82–91, 2014. View at Publisher · View at Google Scholar
  15. S. K. Mallineni, S. Nuvvula, J. P. Matinlinna, C. K. Yiu, and N. M. King, “Biocompatibility of various dental materials in contemporary dentistry: a narrative insight,” Journal of Investigative and Clinical Dentistry, vol. 4, no. 1, pp. 9–19, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Faurschou, T. Menné, J. D. Johansen, and J. P. Thyssen, “Metal allergen of the 21st century—a review on exposure, epidemiology and clinical manifestations of palladium allergy,” Contact Dermatitis, vol. 64, no. 4, pp. 185–195, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. R. R. Torgerson, M. D. P. Davis, A. J. Bruce, S. A. Farmer, and R. S. Rogers III, “Contact allergy in oral disease,” Journal of the American Academy of Dermatology, vol. 57, no. 2, pp. 315–321, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. P. K. Vallittu, “Survival rates of resin-bonded, glass fiber-reinforced composite fixed partial dentures with a mean follow-up of 42 months: a pilot study,” Journal of Prosthetic Dentistry, vol. 91, no. 3, pp. 241–246, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. C. C. M. Van Heumen, C. M. Kreulen, and N. H. J. Creugers, “Clinical studies of fiber-reinforced resin-bonded fixed partial dentures: a systematic review,” European Journal of Oral Sciences, vol. 117, no. 1, pp. 1–6, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Foitzik, A. M. Lennon, and T. Attin, “Successful use of a single-retainer all-ceramic resin-bonded fixed partial denture for replacement of a maxillary canine: a clinical report,” Quintessence International, vol. 38, no. 3, pp. 241–246, 2007. View at Google Scholar · View at Scopus
  21. F. Komine and M. Tomic, “A single-retainer zirconium dioxide ceramic resin-bonded fixed partial denture for single tooth replacement: a clinical report,” Journal of Oral Science, vol. 47, no. 3, pp. 139–142, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Sasse and M. Kern, “CAD/CAM single retainer zirconia-ceramic resin-bonded fixed dental prostheses: clinical outcome after 5 years,” International Journal of Computerized Dentistry, vol. 16, no. 2, pp. 109–118, 2013. View at Google Scholar · View at Scopus
  23. I. Sailer, T. Bonani, U. Brodbeck, and C. H. F. Hämmerle, “Retrospective clinical study of single-retainer cantilever anterior and posterior glass-ceramic resin-bonded fixed dental prostheses at a mean follow-up of 6 years,” The International Journal of Prosthodontics, vol. 26, pp. 443–450, 2013. View at Google Scholar
  24. C. C. M. van Heumen, J. W. V. van Dijken, J. W. Tanner et al., “Five-year survival of 3-unit fiber-reinforced composite fixed partial dentures in the anterior area,” Dental Materials, vol. 25, no. 6, pp. 820–827, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Shinya, D. Yokoyama, L. V. J. Lassila, A. Shinya, and P. K. Vallittu, “Three-dimensional finite element analysis of metal and FRC adhesive fixed dental prostheses,” Journal of Adhesive Dentistry, vol. 10, no. 5, pp. 365–371, 2008. View at Google Scholar · View at Scopus
  26. R. Wheeler, Dental Anatomy, Phisiology and Oclussion, Saunders, Philadelphia, Pa, USA, 5th edition, 1974.
  27. M. Ootaki, A. Shin-Ya, H. Gomi, and Y. Nakasone, “Optimum design for fixed partial dentures made of hybrid resin with glass fiber reinforcement by finite element analysis: effect of vertical reinforced thickness on fiber frame,” Dental Materials Journal, vol. 26, no. 2, pp. 280–289, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. D. Yokoyama, A. Shinya, L. V. J. Lassila et al., “Framework design of an anterior fiber-reinforced hybrid composite fixed partial denture: a 3D finite element study.,” The International journal of prosthodontics, vol. 22, no. 4, pp. 405–412, 2009. View at Google Scholar · View at Scopus
  29. A. Waltimo and M. Könönen, “Maximal bite force and its association with signs and symptoms of craniomandibular disorders in young Finnish non-patients.,” Acta Odontologica Scandinavica, vol. 53, no. 4, pp. 254–258, 1995. View at Publisher · View at Google Scholar · View at Scopus
  30. E. Helkimo, G. E. Carlsson, and M. Helkimo, “Bite force and state of dentition.,” Acta Odontologica Scandinavica, vol. 35, no. 6, pp. 297–303, 1977. View at Publisher · View at Google Scholar · View at Scopus
  31. J. R. Kelly, P. Benetti, P. Rungruanganunt, and A. D. Bona, “The slippery slope—critical perspectives on in vitro research methodologies,” Dental Materials, vol. 28, no. 1, pp. 41–51, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. T.-S. Lin, C.-L. Lin, C.-H. Wang, C.-H. Chang, and Y.-H. Chang, “The effect of retainer thickness on posterior resin-banded prostheses: a finite element study,” Journal of Oral Rehabilitation, vol. 31, no. 11, pp. 1123–1129, 2004. View at Publisher · View at Google Scholar · View at Scopus
  33. S. A. Romeed, S. L. Fok, and N. H. F. Wilson, “Finite element analysis of fixed partial denture replacement,” Journal of Oral Rehabilitation, vol. 31, no. 12, pp. 1208–1217, 2004. View at Publisher · View at Google Scholar · View at Scopus
  34. J. H. Kinney, S. J. Marshall, and G. W. Marshall, “The mechanical properties of human dentin: a critical review and re-evaluation of the dental literature,” Critical Reviews in Oral Biology and Medicine, vol. 14, no. 1, pp. 13–29, 2003. View at Publisher · View at Google Scholar · View at Scopus
  35. L. A. Lang, R.-F. Wang, B. Kang, and S. N. White, “Validation of finite element analysis in dental ceramics research,” Journal of Prosthetic Dentistry, vol. 86, no. 6, pp. 650–654, 2001. View at Publisher · View at Google Scholar · View at Scopus
  36. M. Rosentritt, C. Kolbeck, S. Ries, M. Gross, M. Behr, and G. Handel, “Zirconia resin-bonded fixed partial dentures in the anterior maxilla,” Quintessence International, vol. 39, no. 4, pp. 313–319, 2008. View at Google Scholar · View at Scopus
  37. W. Oh, N. Götzen, and K. J. Anusavice, “Influence of connector design on fracture probability of ceramic fixed-partial dentures,” Journal of Dental Research, vol. 81, no. 9, pp. 623–627, 2002. View at Publisher · View at Google Scholar · View at Scopus
  38. W.-S. Oh and K. J. Anusavice, “Effect of connector design on the fracture resistance of all-ceramic fixed partial dentures,” Journal of Prosthetic Dentistry, vol. 87, no. 5, pp. 536–542, 2002. View at Publisher · View at Google Scholar · View at Scopus
  39. K. Plengsombut, J. D. Brewer, E. A. Monaco Jr., and E. L. Davis, “Effect of two connector designs on the fracture resistance of all-ceramic core materials for fixed dental prostheses,” Journal of Prosthetic Dentistry, vol. 101, no. 3, pp. 166–173, 2009. View at Publisher · View at Google Scholar · View at Scopus
  40. M. InoKoshi, J. De Munck, S. Minakuchi, and B. Van Meerbeek, “Meta-analysis of bonding effectivenes to zirconia ceramics,” Journal of Dental Research, vol. 93, pp. 329–334, 2014. View at Google Scholar
  41. J. Y. Thompson, B. R. Stoner, J. R. Piascik, and R. Smith, “Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now?” Dental Materials, vol. 27, no. 1, pp. 71–82, 2011. View at Publisher · View at Google Scholar · View at Scopus
  42. M. N. Aboushelib, C. J. Kleverlaan, and A. J. Feilzer, “Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials,” Journal of Prosthetic Dentistry, vol. 98, no. 5, pp. 379–388, 2007. View at Publisher · View at Google Scholar · View at Scopus
  43. K. Hikita, B. van Meerbeek, J. de Munck et al., “Bonding effectiveness of adhesive luting agents to enamel and dentin,” Dental Materials, vol. 23, no. 1, pp. 71–80, 2007. View at Publisher · View at Google Scholar · View at Scopus
  44. S. O. Koutayas, M. Kern, F. Ferraresso, and J. R. Strub, “Influence of framework design on fracture strength of mandibular anterior all-ceramic resin-bonded fixed partial dentures,” International Journal of Prosthodontics, vol. 15, no. 3, pp. 223–229, 2002. View at Google Scholar · View at Scopus
  45. S. O. Koutayas, M. Kern, F. Ferraresso, and J. R. Strub, “Influence of design and mode of loading on the fracture strength of all-ceramic resin-bonded fixed partial dentures: an in vitro study in a dual-axis chewing simulator,” The Journal of Prosthetic Dentistry, vol. 83, no. 5, pp. 540–547, 2000. View at Publisher · View at Google Scholar · View at Scopus
  46. J. Chai, F. C. S. Chu, T. W. Chow, and B. M. H. Liang, “Chemical solubility and flexural strength of zirconia-based ceramics,” International Journal of Prosthodontics, vol. 20, no. 6, pp. 587–595, 2007. View at Google Scholar · View at Scopus
  47. J. Tinschert, D. Zwez, R. Marx, and K. J. Anusavice, “Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics,” Journal of Dentistry, vol. 28, no. 7, pp. 529–535, 2000. View at Publisher · View at Google Scholar · View at Scopus
  48. B.-K. Kim, H. E.-K. Bae, J.-S. Shim, and K.-W. Lee, “The influence of ceramic surface treatments on the tensile bond strength of composite resin to all-ceramic coping materials,” Journal of Prosthetic Dentistry, vol. 94, no. 4, pp. 357–362, 2005. View at Publisher · View at Google Scholar · View at Scopus
  49. S. Schultheis, J. R. Strub, T. A. Gerds, and P. C. Guess, “Monolithic and bi-layer CAD/CAM lithium-disilicate versus metal-ceramic fixed dental prostheses: comparison of fracture loads and failure modes after fatigue,” Clinical Oral Investigations, vol. 17, no. 5, pp. 1407–1413, 2013. View at Publisher · View at Google Scholar · View at Scopus
  50. A. M. Altamimi, A. P. Tripodakis, G. Eliades, and H. Hirayama, “Comparison of fracture resistance and fracture characterization of bilayered zirconia/ fluorapatite and monolithic lithium disilicate all ceramic crowns,” International Journal of Esthetic Dentistry, vol. 9, pp. 98–110, 2014. View at Google Scholar
  51. G. Culy and M. J. Tyas, “Direct resin-bonded, fibre-reinforced anterior bridges: a clinical report,” Australian Dental Journal, vol. 43, no. 1, pp. 1–4, 1998. View at Publisher · View at Google Scholar · View at Scopus
  52. W. Li, M. V. Swain, Q. Li, J. Ironside, and G. P. Steven, “Fibre reinforced composite dental bridge: part I: experimental investigation,” Biomaterials, vol. 25, no. 20, pp. 4987–4993, 2004. View at Publisher · View at Google Scholar · View at Scopus
  53. M. Özcan, O. Kumbuloglu, and A. User, “Fracture strength of fiber-reinforced surface-retained anterior cantilever restorations,” International Journal of Prosthodontics, vol. 21, no. 3, pp. 228–232, 2008. View at Google Scholar · View at Scopus
  54. F. Keulemans, L. V. J. Lassila, S. Garoushi, P. K. Vallittu, C. J. Kleverlaan, and A. J. Feilzer, “The influence of framework design on the load-bearing capacity of laboratory-made inlay-retained fibre-reinforced composite fixed dental prostheses,” Journal of Biomechanics, vol. 42, no. 7, pp. 844–849, 2009. View at Publisher · View at Google Scholar · View at Scopus
  55. Q. Xie, L. V. J. Lassila, and P. K. Vallittu, “Comparison of load-bearing capacity of direct resin-bonded fiber-reinforced composite FPDs with four framework designs,” Journal of Dentistry, vol. 35, no. 7, pp. 578–582, 2007. View at Publisher · View at Google Scholar · View at Scopus
  56. S. Garoushi, P. K. Vallittu, and L. V. J. Lassila, “Short glass fiber reinforced restorative composite resin with semi-inter penetrating polymer network matrix,” Dental Materials, vol. 23, no. 11, pp. 1356–1362, 2007. View at Publisher · View at Google Scholar · View at Scopus
  57. M. Rosentritt, S. Ries, C. Kolbeck, M. Westphal, E.-J. Richter, and G. Handel, “Fracture characteristics of anterior resin-bonded zirconia-fixed partial dentures,” Clinical Oral Investigations, vol. 13, no. 4, pp. 453–457, 2009. View at Publisher · View at Google Scholar · View at Scopus
  58. R. G. Craig, F. A. Peyton, and D. W. Johnson, “Compressive properties of enamel, dental cements, and gold,” Journal of Dental Research, vol. 40, pp. 936–945, 1961. View at Google Scholar
  59. R. G. Craig and F. A. Peyton, “Elastic and mechanical properties of human dentin,” Journal of Dental Research, vol. 37, no. 4, pp. 710–718, 1958. View at Publisher · View at Google Scholar · View at Scopus
  60. J. W. Farah and R. G. Craig, “Finite element stress analysis of a restored axisymmetric first molar,” Journal of Dental Research, vol. 53, no. 4, pp. 859–866, 1974. View at Publisher · View at Google Scholar · View at Scopus
  61. A. K. Aydin and A. E. Tekkaya, “Stresses induced by different loadings around weak abutments,” The Journal of Prosthetic Dentistry, vol. 68, no. 6, pp. 879–884, 1992. View at Publisher · View at Google Scholar · View at Scopus
  62. P. Magne, N. Perakis, U. C. Belser, and I. Krejci, “Stress distribution of inlay-anchored adhesive fixed partial dentures: a finite element analysis of the influence of restorative materials and abutment preparation design,” Journal of Prosthetic Dentistry, vol. 87, no. 5, pp. 516–528, 2002. View at Publisher · View at Google Scholar · View at Scopus
  63. S. M. Chung, A. U. J. Yap, W. K. Koh, K. T. Tsai, and C. T. Lim, “Measurement of Poisson's ratio of dental composite restorative materials,” Biomaterials, vol. 25, no. 13, pp. 2455–2460, 2004. View at Publisher · View at Google Scholar · View at Scopus
  64. J. D. Eick, S. P. Kotha, C. C. Chappelow et al., “Properties of silorane-based dental resins and composites containing a stress-reducing monomer,” Dental Materials, vol. 23, no. 8, pp. 1011–1017, 2007. View at Publisher · View at Google Scholar · View at Scopus
  65. H. F. Morris, “Veterans administration cooperative studies project no. 147/242. Part VII: the mechanical properties of metal ceramic alloys as cast and after simulated porcelain firing,” The Journal of Prosthetic Dentistry, vol. 61, no. 2, pp. 160–169, 1989. View at Publisher · View at Google Scholar · View at Scopus
  66. K. J. Anusavice, B. Hojjatie, and P. H. Dehoff, “Influence of metal thickness on stress distribution in metal-ceramic crowns,” Journal of Dental Research, vol. 65, no. 9, pp. 1173–1178, 1986. View at Publisher · View at Google Scholar · View at Scopus