Comprehensive Analysis on Heterogeneous Wireless Network in High-Speed Scenarios

Table 2

Measurement parameters.

parameters	division	introduction
RSRP	Network access Layer	Reference Signal Received Power (RSRP) is a measurement used to represent the received power level in an LTE cell network.
SNR		Signal-to-noise ratio is a measurement used in science and engineering that compares the level of a desired signal to the level of background noise.
Mode		Received signal network standard
Cell ID		The ID of cellular network base station. It means that a network switch has occurred when it changes.
RTT	Network Layer	Round-trip time is the length of time it takes for a signal to be sent plus the length of time it takes for an acknowledgment of that signal to be received.
Jitter		Jitter is the variation in packet delay at the receiver of the information.
TCP throughput	Transport Layer	The rate of TCP packets delivery over a transmission channel.