Tissue Regeneration in DentistryView this Special Issue
Application of Laser-Induced Bone Therapy by Carbon Dioxide Laser Irradiation in Implant Therapy
This study evaluated the application of laser-induced bone therapy (LIBT) to reduce implant healing time in rat tibia. Twenty 10-week-old female Sprague-Dawlay rats were used. The rats received laser irradiation (laser group) or sham operation (control group) on either side of the tibia. Five days after invasion, titanium implants were inserted in proximal tibia. Five, 10, and 20 days after implant placement, tibiae were collected. After taking micro-CT and performing a torque test, the tibiae were decalcified and 8-μm-thick sections were prepared. Specimens were stained with hematoxylin and eosin. Results. Micro-CT images, removal torque values, and histomorphometric analysis data demonstrated a significantly accelerated bone formation in the laser group earlier in the healing process. Conclusion. The use of laser irradiation was effective in promoting bone formation and acquiring osseointegration of titanium implants inserted in rat tibia. LIBT may be suitable for use in implant therapy.
Bone formation in peri-implant tissue is a key factor in acquiring osseointegration and maintaining implant stability. However, a longer period for healing and acquiring osseointegration is needed in order to add occlusal load. It has been suggested that a standard healing period of at least 3 months in the mandible and 6 months in the maxilla is needed before implant loading [1–3]. Thus, to speed up the rehabilitation process is still a challenging and important clinical aim.
The skeleton that adapts to mechanical usage and mechanical loading promotes bone formation and remodeling, which is commonly referred to as “Wolff’s Law” [4, 5] and Frost’s theory [6–8]. Mechanical strains such as pulsed electromagnetic fields [9, 10] and low-intensity pulsed ultrasound [11, 12] are widely accepted. Currently, lasers are commonly used in medical and dental treatment. Clinical applications of lasers are largely divided into low reactive level laser therapy (LLLT) and high reactive level laser therapy (HLLT). LLLT provides photobiological and photochemical effects. LLLT enhanced healing, especially in soft tissues [13, 14] such as healing of ulcers  and other wounds . Recent research demonstrated that the enhancement of functional attachment of bone-to-titanium implants and promotion of bone mineralization could be achieved by LLLT [17–21]. This would allow the implant to be loaded after a shorter period, reducing the treatment time. A positive effect of LLLT on osseointegration of implants and maturation of peri-implant bone was mainly obtained with Gallium Aluminum Arsenide (GaAlAs) laser [17, 18, 20]. HLLT is useful for cutting biologic materials and producing coagulation necrosis in target tissues with a subsequent reaction in the surrounding tissue. When HLLT is applied to hard tissues such as tooth or bone, carbon dioxide laser (CO2 laser) induces extreme cracking and charring of surrounding enamel, dentin, and bone. After HLLT CO2 laser irradiation on rat tibia, disappearance and shrinkage of osteocytes within the lacunae have been observed [22–27]. New bone formation was also observed at the tibial wall adjacent to the marrow cavity under the laser-irradiated cortex [27, 28]. However, HLLT thermal damage results in extensive cell mediated resorption of bone or sequestration of dead bone , thus severely limiting the use of HLLT on bone. Currently, CO2 laser is common laser used in dental clinics and it also enables rapid and precise tissue destruction, reduces bleeding and postoperative pain, and results in low morbidity, minimal scarring, and wound contracture . However, the application of CO2 laser in dental treatment is restricted to the treatment of soft tissue.
This time, we hypothesized that bone formation occurring within the marrow mediated by HLLT CO2 laser irradiation would accelerate the osseointegration process and reduce healing time. To evaluate our hypothesis, an animal study using functional and morphological analysis was performed.
2. Material and Methods
2.1. Experimental Design
The care and use of animals followed “The Guidelines for the Care and Use of Animals” approved by Ohu University in accordance with the principles of the NIH guidelines (approval date: 5/14/2009; Approval number: 2). Twenty 10-week-old female Sprague-Dawley rats were purchased from Crea Japan (Tokyo, Japan) and used as the experimental model in this study. The right tibia of all rats was treated with laser irradiation, and left tibia was sham operated. Five days after laser irradiation and sham operation, titanium implants were placed. Briefly, under general anesthesia, the surface of the proximal metaphases of the tibiae was exposed by an incision approximately 10 mm in length. Under constant saline irrigation, a bicortical implant bed was drilled with a dental bur at a rotary speed not exceeding 1500 rpm, and the implant was placed until the screw thread completely penetrated the bone cortex. After installation, the soft tissue was replaced and sutured. After these procedures, the animals were housed with free access to water and provided a diet. Care was taken to avoid unnecessary stress and discomfort to the animal throughout the experimental period. Five animals were sacrificed 5, 10, or 20 days after implantation, and tibiae containing implants were collected (Figure 1).
2.2. CO2 Laser
In this experiment, CO2 laser (NANOLASER GL-III, GC Co., Tokyo, Japan, and OPELASER Lite, Yoshida Co., Tokyo, Japan) was used at a wavelength of 10.6 μm, a diameter of 1.70 mm, output of 1.0 W, and a continuous wave form. The laser beam was focused by maintaining 10 mm delivery tip-to-target surface distance. Total irradiated energy was 220.4 J/cm2.
2.3. Titanium Implant
Screw-shaped implants made from commercially pure titanium were used in this study (Nishimura Co., Ltd., Fukui, Japan). The total length of each implant was 2 mm, thread diameter 1.4 mm, and pitch 0.6 mm. Implants were cleaned in absolute ethanol in an ultrasonic bath and sterilized by autoclaving.
2.4. Microtomographic Histomorphometry (Micro-CT)
After sacrificing the rats, tibiae with titanium implants were collected, and microtomographic histomorphometry was performed with a high-resolution micro-CT system (TOSCANER-30000, Toshiba IT and Control Systems Co., Tokyo, Japan). The Computed tomography parameters were as follows: (1) the image pixel size was set to 1024 × 1024; (2) the slice thickness was set to 0.05 mm; (3) the image magnification was set to 10x; (4) the X-ray tube voltage was set to 100 kV; (5) the anode electrical current was set to 80 μA. Three dimensional images were reconstructed using the microreconstruct software (Simplant Pro, Materialise Dental Japan Inc., Tokyo, Japan.).
2.5. Torque Test
After stabilization of the implanted tibia, the force needed to unscrew the implants was measured using a Tohnichi Torque driver FTD2-S (Tohnichi Mfg. Co., Ltd., Tokyo, Japan). It has a round dial gauge with a pointer to read the peak value. Peak value when the rupture occurred between implant and bone was recorded, and the mean torque measurements were calculated for each implant inserted into the tibia specimen.
2.6. Histomorphometric Procedure
After removing the titanium implants, collected tibiae were fixed in 10% phosphate-buffered neutral formalin (pH 7.4) (Wako Pure Chemical Industries, Ltd., Osaka, Japan), decalcified in 0.5 mol/L EDTA (pH 7.5) (Wako Pure Chemical Industries) for 2 weeks at 4°C, dehydrated in an ethanol (Wako Pure Chemical Industries) series, washed in xylene (Wako Pure Chemical Industries), and then embedded in paraffin. Decalcified 8-μm thick sections were made and stained with hematoxylin and eosin (H&E) for general morphological analysis.
2.7. Statistical Analysis
For biomechanical testing analysis, a two-way analysis of variance was used to examine the influence on osseointegration of (1) laser or sham operated and (2) the length of the healing period. Differences with a value less than 0.05 were considered significant.
3.1. Osteoid Formation (Figure 2)
To examine the correlation between total irradiated energy and osteoid formation capacity, we evaluated four kinds of energy densities, 88.2, 220.4, 441.0, and 661.5 J/cm2. Five days after laser irradiation, a char layer, empty osteocytic lacunas were observed. The osteocytic lacunae in most of the cortical bone appeared to be devoid of osteocytes because the typical blue-purple staining of osteocytic nuclei was absent on H&E staining. Moreover, as energy densities increased, the depth of ablation and width of surface damage increased (Figures 2(a)–2(d)). Osteoid formation just under the irradiated cortical bone was observed in the 88.2, 220.5, and 441.0 J/cm2 groups tibia (Figures 2(a)–2(c)). In the 441.0 J/cm2 group tibia, no osteoid formation was observed (Figure 2(d)). In the bur injured tibia, a cortical bone defect and a small amount of reactive bone formation in the bone marrow space were observed (Figure 2(e)). From this observation, we used 220.5 J/cm2 to this experiment.
3.2. Micro-CT Observation of Tibia (Figure 3)
Ten days after injury (5 days after implantation), little radiopacity was observed around the implant body in the bur-implant group tibia. In the laser group tibia, evident radiopacity was observed around the titanium implant.
Fifteen days after injury (10 days after implantation), beginning of evident radiopacity was observed around titanium implant body in the control group. In the laser group tibia, increased radiopacity was observed around the titanium implant.
Twenty-five days after injury (20 days after implantation), obvious radiopacity, though thinner than that in the laser group, was observed around the implant body. In the laser group tibia, thick radiopacity was observed around the implant body.
3.3. Removal Torque Test (Figure 4)
Functional attachment of the integration between implants and bone was evaluated using a torque test with torque drivers.
Ten days after injury (5 days after implant placement), the average removal torque was N cm for the control group and N cm for the laser group. There was a significant difference between the laser and control groups.
Fifteen days after injury (10 days after implant placement), the average removal torque was N cm for the control group and N cm for the laser group. There was a statistically significant difference between the laser and control groups.
Twenty-five days after injury (20 days after implant placement), the average removal torque was N cm for the control group and N cm for the laser group. There was a significant difference between the laser and control groups. Moreover, there were significant differences between 25-day value of control group and 10- or 15-day value of laser group.
3.4. Histological Findings (Figure 5)
3.4.1. Day 10 (Figures 5(a) and 5(d))
Ten days after injury (5 days after titanium implant insertion), hematoma, soft tissue, and little bone fragment formation were observed around the inserted titanium implant in the control group tibia (Figure 5(a)). In the laser group tibia, a large amount of bone matrix had formed along the bone-implant interface (Figure 5(d)).
3.4.2. Day 15 (Figures 5(b) and 5(e))
Fifteen days after injury (10 days after titanium implant insertion), formation of woven bone was observed around the inserted titanium implant in the control group tibia (Figure 5(b)). In the laser group, most of the implant surface was in direct contact with the new woven bone (Figure 5(e)).
3.4.3. Day 25 (Figures 5(c) and 5(f))
Twenty-five days after injury (20 days after titanium implant insertion), the implant surface was also covered with newly formed bone in the control group tibia. But the trabecular bone was thinner than that in the laser group (Figure 5(c)). In the laser group, most of the implant surface was covered with thick newly formed bone lamella, which was connected with preexisting bone by newly formed trabeculae. Moreover, osteocytes were apparent in the newly formed bone matrix surrounding the implant (Figure 5(f)).
CO2 laser emits a beam of energy that lases tissues in a noncontact mode. HLLT CO2 laser irradiation is known to produce a photobiodestructive reaction inducing cellular vaporization, whereas LLLT CO2 laser therapy generates a photobioactive reaction (PAR) stimulating cellular proliferation and differentiation . CO2 laser has a wavelength of 10.6 μm, which falls within the specific absorption spectrum for calcium hydroxyapatite, 9.0 to 11.0 μm . Moreover, previous report indicated that when laser irradiation was performed on the cortical bone, only CO2 laser could induce newly bone formation in the marrow cavity . Based on this observation, the mineral components of bone are expected to exhibit maximal absorption of the laser energy. It seems reasonable to assume that CO2 laser irradiation of the bone tissue would be suitable for bone regeneration therapy. However, it is commonly accepted that CO2 laser is unable to use hard tissue treatment.
The bone tissue that received laser irradiation demonstrated acceleration of bone formation. Bone formation induced by CO2 laser has also been reported previously [24–26, 33, 34]. As cellular mechanisms of this reactive bone formation have been obscure, we speculated that osteocytes have been capable of playing a part. In fact, Tasumi et al. reported that bone formation in tibiae of transgenic mouse model in which specific ablation of osteocytes have been accelerated drastically . They pointed out that mature osteocytes express Sclerostin, the negative regulator of osteoblastic bone formation by antagonizing BMP and Wnt signal. Moreover, the expression of Sclerostin was decreased followed by osteocytes ablation in the transgenic mouse model, which may cause stimulation of bone formation. In this present study, judging from osteocytic appearances with pyknotic, shrunken, and displaced cells within their lacunae, laser irradiation locally damaged osteocytes. Damaged osteocytes mediated by laser irradiation also decreased sclerostin expression; the bone formation could be stimulated. However, it is necessary to analyze what is the negative and/or positive regulator of osteocyte-derived factors induced by laser irradiation. Further investigation will be required to clarify this point.
However, laser irradiation also induced not only damage of cortex but also induced the inflammatory reaction and degeneration of bone marrow. In this study, we inserted titanium implant to the damaged cortex and bone marrow. To achieve the early healing and lording, osseointegration of screw neck to cortical bone is important. Additional studies are needed to clarify the effective irradiation energy to minimize the heat damaged cortical bone and bone marrow inflammatory reaction in order to apply this method to dental implant therapy.
To confirm whether laser-induced bone therapy (LIBT) was effective in implant therapy, we inserted a titanium implant into woven bone and evaluated the bone formation. Although an implant has the ability to induce bone formation around itself, we hypothesized that bone formation occurring within the marrow prior to implant insertion would accelerate the osseointegration process and reduce healing time. To evaluate our hypothesis, we used histomorphological and clinical parameters to evaluate the degree of bone formation and osseointegration. Micro-CT image analysis , removal torque measurements [37–43], and histomorphometric evaluation [21, 43–47] are currently considered standard analyses in implant research. In the early healing stage, advancement of histomorphological changes and significantly increased functional analysis data were observed in the laser-implant group. These results may be attributed to the laser-mediated bone formation in the marrow area. These results suggest that preoperative HLLT treatment may promote formation of bone tissue with a tighter mesh of trabeculae, which promotes early osseointegration.
Many signaling molecules, such as growth factors and hormones, are involved in bone metabolism [48, 49], especially around the titanium implant . Further investigations are needed to focus on the underlying biological mechanisms, which induce osseointegration in implant therapy when using LIBT.
In this experimental model, the application of LIBT before implant insertion may promote bone formation and facilitate osseointegration of titanium implants (Figure 6). The introduction of LIBT in implant treatment seems feasible and may be of therapeutic benefit in accelerating healing.
This study was partially supported by a Grant-in-Aid for Scientific Research from the Ministry of Education, Science, Sports, and Culture, Japan (22791843).
P. I. Brånemark, G. A. Zarb, and T. Albrektsson, Tissue Integrated Protheses: Osseointegration in Clinical Dentistry, Quintessence, Chicago, Ill, USA, 1985.
R. Adell, U. Lekholm, B. Rockler, and P. I. Branemark, “A 15-year study of osseointegrated implants in the treatment of the edentulous jaw,” International Journal of Oral Surgery, vol. 10, no. 6, pp. 387–416, 1981.View at: Google Scholar
T. Albrektsson, G. Zarb, P. Worthington, and A. R. Eriksson, “The long-term efficacy of currently used dental implants: a review and proposed criteria of success,” The International Journal of Oral & Maxillofacial Implants, vol. 1, no. 1, pp. 11–25, 1986.View at: Google Scholar
J. Wolff, Das Gesetz der Transformation der Knochen, Springer, Berlin, Germany, 1892, Translated as The Law of Bone Remodeling.
H. M. Frost, “Wolff's Law and bone's structural adaptations to mechanical usage: an overview for clinicians,” Angle Orthodontist, vol. 64, no. 3, pp. 175–188, 1994.View at: Google Scholar
H. M. Frost, “Bone “mass” and the “mechanostat”: a proposal,” Anatomical Record, vol. 219, no. 1, pp. 1–9, 1987.View at: Google Scholar
H. M. Frost, “Perspectives: a proposed general model of the “Mechanostat” (suggestions from a new skeletal-biologic paradigm),” Anatomical Record, vol. 244, no. 2, pp. 139–147, 1996.View at: Google Scholar
J. M. Hughes and M. A. Petit, “Biological underpinnings of frost's mechanostat thresholds: the important role of osteocytes,” Journal of Musculoskeletal Neuronal Interactions, vol. 10, no. 2, pp. 128–135, 2010.View at: Google Scholar
R. A. Luben, C. D. Cain, and M. C. Y. Chen, “Effects of electromagnetic stimuli on bone and bone cells in vitro: inhibition of responses to parathyroid hormone by low-energy low-frequency fields,” Proceedings of the National Academy of Sciences of the United States of America, vol. 79, no. 13, pp. 4180–4184, 1982.View at: Google Scholar
R. J. Fitzsimmons and D. J. Baylink, “Growth factors and electromagnetic fields in bone,” Clinics in Plastic Surgery, vol. 21, no. 3, pp. 401–406, 1994.View at: Google Scholar
J. A. Spadaro and S. A. Albanese, “Application of low-intensity ultrasound to growing bone in rats,” Ultrasound in Medicine and Biology, vol. 24, no. 4, pp. 567–573, 1998.View at: Publisher Site | Google Scholar
S. J. Warden, K. L. Bennell, M. R. Forwood, J. M. McMeeken, and J. D. Wark, “Skeletal effects of low-intensity pulsed ultrasound on the ovariectomized rodent,” Ultrasound in Medicine and Biology, vol. 27, no. 7, pp. 989–998, 2001.View at: Publisher Site | Google Scholar
E. Mester, T. Spiry, B. Szende, and J. G. Tota, “Effect of laser rays on wound healing,” The American Journal of Surgery, vol. 122, no. 4, pp. 532–535, 1971.View at: Google Scholar
S. Rochkind, V. Drory, M. Alon, M. Nissan, and G. E. Ouaknine, “Laser phototherapy (780 nm), a new modality in treatment of long-term incomplete peripheral nerve injury: a randomized double-blind placebo-controlled study,” Photomedicine and Laser Surgery, vol. 25, no. 5, pp. 436–442, 2007.View at: Publisher Site | Google Scholar
E. Mester, A. F. Mester, and A. Mester, “The biomedical effects of laser application,” Lasers in Surgery and Medicine, vol. 5, no. 1, pp. 31–39, 1985.View at: Google Scholar
B. Braverman, R. J. McCarthy, A. D. Ivankovich, D. E. Forde, M. Overfield, and M. S. Bapna, “Effect of helium-neon and infrared laser irradiation on wound healing in rabbits,” Lasers in Surgery and Medicine, vol. 9, no. 1, pp. 50–58, 1989.View at: Google Scholar
G. A. Guzzardella, P. Torricelli, N. Nicoli-Aldini, and R. Giardino, “Osseointegration of endosseous ceramic implants after postoperative low-power laser stimulation: an in vivo comparative study,” Clinical Oral Implants Research, vol. 14, no. 2, pp. 226–232, 2003.View at: Publisher Site | Google Scholar
M. Khadra, N. Kasem, S. P. Lyngstadaas, H. R. Haanaes, and K. Mustafa, “Laser therapy accelerates initial attachment and subsequent behavior of human oral fibroblasts cultured on titanium implant material. A scanning electron microscope and histomorphometric analysis,” Clinical Oral Implants Research, vol. 16, no. 2, pp. 168–175, 2005.View at: Google Scholar
C. B. Lopes, A. L. B. Pinheiro, S. Sathaiah, J. Duarte, and M. C. Martins, “Infrared laser light reduces loading time of dental implants: a raman spectroscopic study,” Photomedicine and Laser Surgery, vol. 23, no. 1, pp. 27–31, 2005.View at: Publisher Site | Google Scholar
Y. D. Kim, S. S. Kim, D. S. Hwang et al., “Effect of low-level laser treatment after installation of dental titanium implant-immunohistochemical study of RANKL, RANK, OPG: an experimental study in rats,” Lasers in Surgery and Medicine, vol. 39, no. 5, pp. 441–450, 2007.View at: Publisher Site | Google Scholar
C. L. Pereira, E. A. Sallum, F. H. Nociti, and R. W. F. Moreira, “The Effect of low-intensity laser therapy on bone healing around titanium implants: a histometric study in rabbits,” International Journal of Oral and Maxillofacial Implants, vol. 24, no. 1, pp. 47–51, 2009.View at: Google Scholar
G. M. Rayan, J. V. Pitha, J. S. Edwards, and R. B. Everett, “Effects of CO2 laser beam on cortical bone,” Lasers in Surgery and Medicine, vol. 11, no. 1, pp. 58–61, 1991.View at: Google Scholar
G. M. Rayan, D. T. Stanfield, S. Cahill, S. D. Kosanke, and J. A. Kopta, “Effects of rapid pulsed CO2 laser beam on cortical bone in vivo,” Lasers in Surgery and Medicine, vol. 12, no. 6, pp. 615–620, 1992.View at: Publisher Site | Google Scholar
M. D. McKee, “Effects of CO2 laser irradiation in vivo on rat alveolar bone and incisor enamel, dentin, and pulp,” Journal of Dental Research, vol. 72, no. 10, pp. 1406–1417, 1993.View at: Google Scholar
L. R. Friesen, C. M. Cobb, J. W. Rapley, L. Forgas-Brockman, and P. Spencer, “Laser irradiation of bone—II. Healing response following treatment by CO2 and Nd:YAG Lasers,” Journal of Periodontology, vol. 70, no. 1, pp. 75–83, 1999.View at: Publisher Site | Google Scholar
V. G. McDavid, C. M. Cobb, J. W. Rapley, A. G. Glaros, and P. Spencer, “Laser irradation of bone—III. Long-term healing following treatment by CO2 and Nd:YAG lasers,” Journal of Periodontology, vol. 72, no. 2, pp. 174–182, 2001.View at: Publisher Site | Google Scholar
M. Frentzen, W. Götz, M. Ivanenko, S. Afilal, M. Werner, and P. Hering, “Osteotomy with 80-μs CO2 laser pulses—histological results,” Lasers in Medical Science, vol. 18, no. 2, pp. 119–124, 2003.View at: Publisher Site | Google Scholar
Y. Nakamura, M. Hossain, H. Watanabe, H. Tokonabe, N. Matsumoto, and K. Matsumoto, “A study on the morphological changes of the rat mandibular bone with TEA CO2 laser,” Journal of Clinical Laser Medicine and Surgery, vol. 17, no. 5, pp. 211–215, 1999.View at: Google Scholar
T. M. Williams, C. M. Cobb, J. W. Rapley, and W. J. Killoy, “Histologic evaluation of alveolar bone following CO2 laser removal of connective tissue from periodontal defects,” The International Journal of Periodontics & Restorative Dentistry, vol. 15, no. 5, pp. 497–506, 1995.View at: Google Scholar
O. Hamadah and P. J. Thomson, “Factors affecting carbon dioxide laser treatment for oral precancer: a patient cohort study,” Lasers in Surgery and Medicine, vol. 41, no. 1, pp. 17–25, 2009.View at: Publisher Site | Google Scholar
R. C. J. Verschueren, J. Koudstaal, and J. Oldhoff, “The carbon dioxide laser; some possibilities in surgery,” Acta Chirurgica Belgica, vol. 74, no. 2, pp. 197–204, 1975.View at: Google Scholar
D. G. Nelson, M. Shariati, R. Glena, C. P. Shields, and J. D. Featherstone, “Effect of pulsed low energy infrared laser irradiation on artificial caries-like lesion formation,” Caries Research, vol. 20, no. 4, pp. 289–299, 1986.View at: Google Scholar
A. L. McKenzie, “How far does thermal damage extend beneath the surface of CO2 laser incisions?” Physics in Medicine and Biology, vol. 28, no. 8, pp. 905–912, 1983.View at: Publisher Site | Google Scholar
L. S. Krause, C. M. Cobb, J. W. Rapley, W. J. Killoy, and P. Spencer, “Laser irradiation of bone—I. An in vitro study concerning the effects of the CO2 laser on oral mucosa and subjacent bone,” Journal of Periodontology, vol. 68, no. 9, pp. 872–880, 1997.View at: Google Scholar
S. Tatsumi, K. Ishii, N. Amizuka et al., “Targeted ablation of osteocytes induces osteoporosis with defective mechanotransduction,” Cell Metabolism, vol. 5, no. 6, pp. 464–475, 2007.View at: Publisher Site | Google Scholar
J. Berley, S. Yamano, and C. Sukotjo, “The effect of systemic nicotine on osseointegration of titanium implants in the rat femur,” The Journal of Oral Implantology, vol. 36, no. 3, pp. 185–193, 2010.View at: Publisher Site | Google Scholar
C. Johansson and T. Albrektsson, “Integration of screw implants in the rabbit: a 1-year follow-up of removal torque of titanium implants,” The International Journal of oral & Maxillofacial Implants, vol. 2, no. 2, pp. 69–75, 1987.View at: Google Scholar
P. R. Klokkevold, R. D. Nishimura, M. Adachi, and A. Caputo, “Osseointegration enhanced by chemical etching of the titanium surface: a torque removal study in the rabbit,” Clinical Oral Implants Research, vol. 8, no. 6, pp. 442–447, 1997.View at: Google Scholar
A. Wennerberg, A. Ektessabi, T. Albrektsson, C. Johansson, and B. Andersson, “A 1-year follow-up of implants of differing surface roughness placed in rabbit bone,” International Journal of Oral and Maxillofacial Implants, vol. 12, no. 4, pp. 486–494, 1997.View at: Google Scholar
D. Baker, R. M. London, and R. O'Neal, “Rate of pull-out strength gain of dual-etched titanium implants: a comparative study in rabbits,” International Journal of Oral and Maxillofacial Implants, vol. 14, no. 5, pp. 722–728, 1999.View at: Google Scholar
P. R. Klokkevold, P. Johnson, S. Dadgostari, A. Caputo, J. E. Davies, and R. D. Nishimura, “Early endosseous integration enhanced by dual acid etching of titanium: a torque removal study in the rabbit,” Clinical Oral Implants Research, vol. 12, no. 4, pp. 350–357, 2001.View at: Google Scholar
S. A. Cho and S. K. Jung, “A removal torque of the laser-treated titanium implants in rabbit tibia,” Biomaterials, vol. 24, no. 26, pp. 4859–4863, 2003.View at: Publisher Site | Google Scholar
J. Steigenga, K. Al-Shammari, C. Misch, F. H. Nociti, and H. L. Wang, “Effects of implant thread geometry on percentage of osseointegration and resistance to reverse torque in the tibia of rabbits,” Journal of Periodontology, vol. 75, no. 9, pp. 1233–1241, 2004.View at: Publisher Site | Google Scholar
G. Cordioli, Z. Majzoub, A. Piattelli, and A. Scarano, “Removal torque and histomorphometric investigation of 4 different titanium surfaces: an experimental study in the rabbit tibia,” International Journal of Oral and Maxillofacial Implants, vol. 15, no. 5, pp. 668–674, 2000.View at: Google Scholar
N. Jakse, M. Payer, S. Tangl, A. Berghold, R. Kirmeier, and M. Lorenzoni, “Influence of low-level laser treatment on bone regeneration and osseointegration of dental implants following sinus augmentation: an experimental study on sheep,” Clinical Oral Implants Research, vol. 18, no. 4, pp. 517–524, 2007.View at: Publisher Site | Google Scholar
M. G. Correa, M. L. Gomes Campos, J. B. César-Neto, M. Z. Casati, F. H. Nociti, and E. A. Sallum, “Histometric evaluation of bone around titanium implants with different surface treatments in rats exposed to cigarette smoke inhalation,” Clinical Oral Implants Research, vol. 20, no. 6, pp. 588–593, 2009.View at: Publisher Site | Google Scholar
E. Slaets, I. Naert, G. Carmeliet, and J. Duyck, “Early cortical bone healing around loaded titanium implants: a histological study in the rabbit,” Clinical Oral Implants Research, vol. 20, no. 2, pp. 126–134, 2009.View at: Publisher Site | Google Scholar
S. Yokose and T. Naka, “Lymphocyte enhancer-binding factor 1: an essential factor in odontoblastic differentiation of dental pulp cells enzymatically isolated from rat incisors,” Journal of Bone and Mineral Metabolism, vol. 28, no. 6, pp. 650–658, 2010.View at: Publisher Site | Google Scholar
K. E. S. Poole, R. L. Van Bezooijen, N. Loveridge et al., “Sclerostin is a delayed secreted product of osteocytes that inhibits bone formation,” FASEB Journal, vol. 19, no. 13, pp. 1842–1844, 2005.View at: Publisher Site | Google Scholar
C. Colnot, D. M. Romero, S. Huang et al., “Molecular analysis of healing at a bone-implant interface,” Journal of Dental Research, vol. 86, no. 9, pp. 862–867, 2007.View at: Publisher Site | Google Scholar