About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [1,157 citations: 101–200 of 1,101 articles]

Articles published in Advances in Materials Science and Engineering have been cited 1,157 times. The following is a list of the 1,101 articles that have cited the articles published in Advances in Materials Science and Engineering.

  • Lucimara Lopes da Silva, and Fernando Galembeck, “Morphology of latex and nanocomposite adsorbents prepared by freeze-casting,” J. Mater. Chem. A, vol. 3, no. 14, pp. 7263–7272, 2015. View at Publisher · View at Google Scholar
  • Ana M. Díez-Pascual, and Angel L. Díez-Vicente, “ Development of linseed oil–TiO 2 green nanocomposites as antimicrobial coatings ,” J. Mater. Chem. B, vol. 3, no. 21, pp. 4458–4471, 2015. View at Publisher · View at Google Scholar
  • Cristina Alía, José A. Jofre-Reche, Juan C. Suárez, José M. Arenas, and José Miguel Martín-Martínez, “Influence of post-curing temperature on the structure, properties, and adhesion of vinyl ester adhesive,” Journal of Adhesion Science and Technology, pp. 1–14, 2015. View at Publisher · View at Google Scholar
  • Shahrouz Nayebossadri, Daniel Smith, John Speight, and David Book, “Amorphous Zr-based thin films fabricated by magnetron sputtering for potential application in hydrogen purification,” Journal of Alloys and Compounds, 2015. View at Publisher · View at Google Scholar
  • Naveed Afzal, Mutharasu Devarajan, and Kamarulazizi Ibrahim, “Post-deposition annealing of magnetron sputtered InAlN film at different temperatures,” Journal of Alloys and Compounds, vol. 640, pp. 260–266, 2015. View at Publisher · View at Google Scholar
  • B. X. Xu, Z. H. Cen, J. F. Hu, and J. W. H. Tsai, “Alternative material study for heat assisted magnetic recording transducer application,” Journal of Applied Physics, vol. 117, no. 17, pp. 17C112, 2015. View at Publisher · View at Google Scholar
  • Kallol Das, Jonathan B. Freund, and Harley T. Johnson, “Mechanisms of material removal and mass transport in focused ion beam nanopore formation,” Journal of Applied Physics, vol. 117, no. 8, pp. 085304, 2015. View at Publisher · View at Google Scholar
  • Shanshan Zhang, Jiaojiao Li, Zhuping Yin, Xiaofeng Zhang, Subhas C. Kundu, and Shenzhou Lu, “Silk fibroin composite membranes for application in corneal regeneration,” Journal of Applied Polymer Science, 2015. View at Publisher · View at Google Scholar
  • I. Hossain, N. K. Shekaili, and H. Wagiran, “Thermoluminescence Response of Copper-Doped Potassium Borate Glass Subjected to 6 Megavolt X-Ray Irradiation,” Journal Of Applied Spectroscopy, vol. 82, no. 1, pp. 149–152, 2015. View at Publisher · View at Google Scholar
  • Seth Tomblyn, Elizabeth L. Pettit Kneller, Stephen J. Walker, Mary D. Ellenburg, Christine J. Kowalczewski, Mark Van Dyke, Luke Burnett, and Justin M. Saul, “Keratin hydrogel carrier system for simultaneous delivery of exogenous growth factors and muscle progenitor cells,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2015. View at Publisher · View at Google Scholar
  • Onanong Cheerarot, and Yodthong Baimark, “Thermal and Mechanical Properties of Biodegradable Star-Shaped/Linear Polylactide Stereocomplexes,” Journal of Chemistry, vol. 2015, pp. 1–9, 2015. View at Publisher · View at Google Scholar
  • Morteza Mohsenipour, Shamsuddin Shahid, and Kumars Ebrahimi, “Nitrate Adsorption on Clay Kaolin: Batch Tests,” Journal of Chemistry, vol. 2015, pp. 1–7, 2015. View at Publisher · View at Google Scholar
  • Khaled A. Soudki, Md. Safiuddin, Paul Jeffs, Gary MacDonald, and Marcos Kroker, “Chloride penetration resistance of concrete sealer and coating systems,” Journal of Civil Engineering and Management, vol. 21, no. 4, pp. 492–502, 2015. View at Publisher · View at Google Scholar
  • Audrius Grinys, Danute Vaiciukyniene, Algirdas Augonis, Henrikas Sivilevicius, and Reda Bistrickaite, “Effect of milled electrical cable waste on mechanical properties of concrete,” Journal Of Civil Engineering And Management, vol. 21, no. 3, pp. 300–307, 2015. View at Publisher · View at Google Scholar
  • Abdulkadir Cevik, Ahmet Emin Kurtoglu, Mahmut Bilgehan, Mehmet Eren Gulsan, and Hasan M. Albegmprli, “Support vector machines in structural engineering: a review,” Journal Of Civil Engineering And Management, vol. 21, no. 3, pp. 261–281, 2015. View at Publisher · View at Google Scholar
  • S. Das, B. Ghosh, S. Hussain, R. Bhar, and A.K. Pal, “Pulsed laser deposition: A viable route for the growth of aluminum antimonide film,” Journal of Crystal Growth, vol. 419, pp. 12–19, 2015. View at Publisher · View at Google Scholar
  • Ali Babaei, Akbar Yousefi, Mohammad Afrasiabi, and Meisam Shabanian, “A sensitive simultaneous determination of dopamine, acetaminophen and indomethacin on a glassy carbon electrode coated with a new composite of MCM-41 molecular sieve/ nickel hydroxide nanoparticles/ multiwalled carbon nanotubes,” Journal of Electroanalytical Chemistry, 2015. View at Publisher · View at Google Scholar
  • Xiaohong Zhan, Gaoyang Mi, and Yanhong Wei, “Simulated investigation on the deformation of double laser beam bilateral and simultaneous welding for aircraft panel,” Journal of Laser Applications, vol. 27, no. 2, pp. 022011, 2015. View at Publisher · View at Google Scholar
  • Juan Huang, Dana Křemenáková, Jiří Militký, and Jakub Wiener, “Enhancing side illumination of plastic optical fiber by using TiO2 particles and CO2 laser,” Journal of Laser Applications, vol. 27, no. 3, pp. 032007, 2015. View at Publisher · View at Google Scholar
  • Valentina V. Utochnikova, Alena S. Kalyakina, Leonid S. Lepnev, and Natalia P. Kuzmina, “Luminescence enhancement of nanosized ytterbium and europium fluorides by surface complex formation with aromatic carboxylates,” Journal of Luminescence, 2015. View at Publisher · View at Google Scholar
  • J.S. Ghodake, T.J. Shinde, R.P. Patil, S.B. Patil, and S.S. Suryavanshi, “Initial permeability of Zn–Ni–Co ferrite,” Journal of Magnetism and Magnetic Materials, vol. 378, pp. 436–439, 2015. View at Publisher · View at Google Scholar
  • Dongsheng Qian, and Yaya Peng, “Mathematical Modeling for Microstructural Evolution in Multi-pass Hot Compression of Q345E Alloy Steel,” Journal of Materials Engineering and Performance, 2015. View at Publisher · View at Google Scholar
  • M. Jain, A. P. Moon, and K. Mondal, “Porous Alumina Template by Selective Dissolution of Ni from Sintered Al2O3-Ni Composite,” Journal of Materials Engineering and Performance, 2015. View at Publisher · View at Google Scholar
  • Markus Schmid, Katrein Reichert, Felicia Hammann, and Andreas Stäbler, “Storage time-dependent alteration of molecular interaction–property relationships of whey protein isolate-based films and coatings,” Journal of Materials Science, 2015. View at Publisher · View at Google Scholar
  • E. D. LaBarre, X. Calderon-Colon, M. Morris, J. Tiffany, E. Wetzel, A. Merkle, and M. Trexler, “Effect of a carbon nanotube coating on friction and impact performance of Kevlar,” Journal of Materials Science, 2015. View at Publisher · View at Google Scholar
  • Arvind Kumar, S. K. Mishra, and Vinay Kumar Verma, “Detailed dielectric and rietveld analysis of Sr2+ substituted PZT–PMN ceramics,” Journal of Materials Science: Materials in Electronics, 2015. View at Publisher · View at Google Scholar
  • P. Dhamodharan, C. Manoharan, S. Dhanapandian, M. Bououdina, and S. Ramalingam, “Preparation and characterization of spray deposited Sn-doped ZnO thin films onto ITO subtracts as photoanode in dye sensitized solar cell,” Journal of Materials Science: Materials in Electronics, 2015. View at Publisher · View at Google Scholar
  • H. Abdullah, Noor Aishah Atiqah, A. Omar, Izamarlina Asshaari, Savisha Mahalingam, Zikri Razali, Sahbudin Shaari, J. S. Mandeep, and Halina Misran, “Structural, morphological, electrical and electron transport studies in ZnO-rGO (wt%=0.01, 0.05 and 0.1) based dye-sensitized solar cell,” Journal Of Materials Science-Materials In Electronics, vol. 26, no. 4, pp. 2263–2270, 2015. View at Publisher · View at Google Scholar
  • Kirthanashri S. Vasanthan, Anuradha Subramaniam, Uma Maheswari Krishnan, and Swaminathan Sethuraman, “Influence of 3D porous galactose containing PVA/gelatin hydrogel scaffolds on three-dimensional spheroidal morphology of hepatocytes,” Journal Of Materials Science-Materials In Medicine, vol. 26, no. 1, 2015. View at Publisher · View at Google Scholar
  • Myung Ho Song, Heung Soo Kim, and Byung Moon Kim, “Influence of production parameters on gas hydrate and ice powder pelletizing,” Journal Of Mechanical Science And Technology, vol. 29, no. 3, pp. 1181–1186, 2015. View at Publisher · View at Google Scholar
  • T. Y. Chen, H. P. Cho, C. S. Jwo, M. H. Hung, and W. S. Lee, “ Analyzing How the ZrO 2 Far Infrared Material Affects the Performance of Smooth Tube Heat Exchangers ,” Journal of Nanomaterials, vol. 2015, pp. 1–6, 2015. View at Publisher · View at Google Scholar
  • Anhui Wang, Chao Xu, Chuanwei Zhang, Yunna Gan, and Bin Wang, “Experimental Investigation of the Properties of Electrospun Nanofibers for Potential Medical Application,” Journal of Nanomaterials, vol. 2015, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  • Adnan Haider, Sanghwa Kwak, Kailash Chandra Gupta, and Inn-Kyu Kang, “Antibacterial Activity and Cytocompatibility of PLGA/CuO Hybrid Nanofiber Scaffolds Prepared by Electrospinning,” Journal of Nanomaterials, vol. 2015, pp. 1–10, 2015. View at Publisher · View at Google Scholar
  • Qing Lin, Chenglong Lei, Yun He, Jianmei Xu, and Ruijun Wang, “Mossbauer and XRD Studies of N0.6Cu0.2Zn0.2CexFe2-xO4 Ferrites by Sol-Gel Auto-Combustion,” Journal Of Nanoscience And Nanotechnology, vol. 15, no. 4, pp. 2997–3003, 2015. View at Publisher · View at Google Scholar
  • Ali Morad Rashidi, Masoumeh Mirzaeian, and Saeed Khodabakhshi, “Synthesis of carbon nanotube-supported metallo carboxyporphyrin as a novel nanocatalyst for the mercaptan removal,” Journal of Natural Gas Science and Engineering, vol. 25, pp. 103–109, 2015. View at Publisher · View at Google Scholar
  • Song He, Dongmei Huang, Haijiang Bi, Zhi Li, Hui Yang, and Xudong Cheng, “Synthesis and characterization of silica aerogels dried under ambient pressure bed on water glass,” Journal of Non-Crystalline Solids, vol. 410, pp. 58–64, 2015. View at Publisher · View at Google Scholar
  • Yashar Javadi, Mahmood Hasani, and Seyedali Sadeghi, “Investigation of Clamping Effect on the Welding Sub-surface Residual Stress and Deformation by Using the Ultrasonic Stress Measurement and Finite Element Method,” Journal of Nondestructive Evaluation, vol. 34, no. 1, 2015. View at Publisher · View at Google Scholar
  • Eva Barreira, and Vasco P. de Freitas, “Evaluation of Surface Humidification of Exterior Insulation and Finish Systems,” Journal of Performance of Constructed Facilities, pp. 04015026, 2015. View at Publisher · View at Google Scholar
  • Priyadarshini Ghosh, Shishir Kumar, Gopalakrishnan Ramalingam, Vidya Kochat, Madhavan Radhakrishnan, Sukanya Dhar, Satyam Suwas, Arindam Ghosh, N. Ravishankar, and Srinivasan Raghavan, “Insights on Defect-Mediated Heterogeneous Nucleation of Graphene on Copper,” Journal Of Physical Chemistry C, vol. 119, no. 5, pp. 2513–2522, 2015. View at Publisher · View at Google Scholar
  • Nguyen Van Quyet, Luong Huu Bac, and Dang Duc Dung, “Effect of Li2CO3 addition on the structural, optical, ferroelectric, and electric-field-induced strain of lead-free BNKT-based ceramics,” Journal of Physics and Chemistry of Solids, 2015. View at Publisher · View at Google Scholar
  • Peiyu Cao, Xiaodong Ni, Fuyang Tian, Lajos K Varga, and Levente Vitos, “ Ab initio study of Al x MoNbTiV high-entropy alloys ,” Journal of Physics: Condensed Matter, vol. 27, no. 7, pp. 075401, 2015. View at Publisher · View at Google Scholar
  • Tingting Song, Ming Yan, and Ma Qian, “A dealloying approach to synthesizing micro-sized porous tin (Sn) from immiscible alloy systems for potential lithium-ion battery anode applications,” Journal of Porous Materials, 2015. View at Publisher · View at Google Scholar
  • Nan Du, Lei Ren, Weifu Sun, Xiao Jin, Qing Zhao, Yuanyuan Cheng, Taihuei Wei, and Qinghua Li, “In situ synthesis of binary cobalt-ruthenium nanofiber alloy counter electrode for electrolyte-free cadium sulfide quantum dot solar cells,” Journal of Power Sources, 2015. View at Publisher · View at Google Scholar
  • Ashiqur Rahman, Mohammad Tariqul Islam, Mohd Syafiq Zulfakar, and Huda Abdullah, “Synthesis and characterization of gahnite-based microwave dielectric ceramics (MDC) for microstrip antennas prepared by a sol–gel method,” Journal of Sol-Gel Science and Technology, 2015. View at Publisher · View at Google Scholar
  • Chao Wei, Bin Bo, Fengbo Tao, Yuncai Lu, Shudi Peng, Wei Song, and Qu Zhou, “ Hydrothermal Synthesis and Structural Characterization of NiO/SnO 2 Composites and Hydrogen Sensing Properties ,” Journal of Spectroscopy, vol. 2015, pp. 1–6, 2015. View at Publisher · View at Google Scholar
  • Claudia Voigt, Christos G. Aneziris, and Jana Hubálková, “Rheological Characterization of Slurries for the Preparation of Alumina Foams via Replica Technique,” Journal of the American Ceramic Society, 2015. View at Publisher · View at Google Scholar
  • Chien-Kuo Liu, Kin-Fu Lin, and Ruey-Yi Lee, “Effects of lanthanum-to-calcium ratio on the thermal and crystalline properties of BaO-Al2O3-B2O3-SiO2 based glass sealants for solid oxide fuel cells,” Journal Of The Ceramic Society Of Japan, vol. 123, no. 1436, pp. 239–244, 2015. View at Publisher · View at Google Scholar
  • S. Lafon-Placette, K. Delbe, J. Denape, and M. Ferrato, “Tribological characterization of silicon carbide and carbon materials,” Journal Of The European Ceramic Society, vol. 35, no. 4, pp. 1147–1159, 2015. View at Publisher · View at Google Scholar
  • Florin St. C. Mustata, Nita Tudorachi, Adriana Mustata, and Fanica Mustata, “Physical and thermal characterization of some cellulose fabrics as reinforced materials for composite,” Journal of Thermal Analysis and Calorimetry, 2015. View at Publisher · View at Google Scholar
  • Cathy Bugot, Nathanaëlle Schneider, Marie Jubault, Daniel Lincot, and Frédérique Donsanti, “Temperature effect on zinc oxysulfide-Zn(O,S) films synthesized by atomic layer deposition for Cu(In,Ga)Se2 solar cells,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol. 33, no. 1, pp. 01A151, 2015. View at Publisher · View at Google Scholar
  • Shengyun Luo, Bingxi Yan, Minjian Cao, and Jie Shen, “Enhanced photocatalytic activity of C-TiO2 thin films prepared by magnetron sputtering and post-carbon ion implantation,” Journal of Wuhan University of Technology-Mater. Sci. Ed., vol. 30, no. 2, pp. 245–249, 2015. View at Publisher · View at Google Scholar
  • Hyoung-seok So, Hong-seok Jang, Janchivdorj Khulgadai, and Seung-young So, “Mechanical properties and microstructure of reactive powder concrete using ternary pozzolanic materials at elevated temperature,” Ksce Journal Of Civil Engineering, vol. 19, no. 4, pp. 1050–1057, 2015. View at Publisher · View at Google Scholar
  • Fang Wang, Jiaxing Shao, Leon M. Keer, Lu Li, and Junqian Zhang, “The effect of elementary fibre variability on bamboo fibre strength,” Materials & Design, vol. 75, pp. 136–142, 2015. View at Publisher · View at Google Scholar
  • Sajjad Ahmad, Rao Arsalan Khushnood, Pravin Jagdale, Jean-Marc Tulliani, and Giuseppe Andrea Ferro, “High performance self-consolidating cementitious composites by using micro carbonized bamboo particles,” Materials & Design, vol. 76, pp. 223–229, 2015. View at Publisher · View at Google Scholar
  • Balbir Singh, Jatinder Kumar, and Sudhir Kumar, “ Investigation of the Tool Wear Rate in Tungsten Powder Mixed Electric Discharge Machining of AA6061/10%SiC p Composite ,” Materials and Manufacturing Processes, pp. 150323220037006, 2015. View at Publisher · View at Google Scholar
  • Yang Li, Taotao Wu, and Mujie Yang, “Bilayer-structured nanocomposite of Ag and crosslinked polyelectrolyte for the detection of humidity,” Materials Chemistry and Physics, vol. 153, pp. 346–352, 2015. View at Publisher · View at Google Scholar
  • Mukhtar H. Ahmed, John A. Byrne, and James McLaughlin, “Kinetics and thermodynamics of human serum albumin adsorption on silicon doped diamond like carbon,” Materials Chemistry and Physics, 2015. View at Publisher · View at Google Scholar
  • Arvind Kumar, Madan Lal Singla, Amod Kumar, and Jaspreet Kaur Rajput, “POMANI-Mn3O4 based thin film NTC thermistor and its linearization for overheating protection sensor,” Materials Chemistry And Physics, vol. 156, pp. 150–162, 2015. View at Publisher · View at Google Scholar
  • Naveed Afzal, Mutharasu Devarajan, and Kamarulazizi Ibrahim, “Structural and surface characterization of magnetron sputtered In1−xAlxN films grown on GaAs substrates,” Materials Letters, 2015. View at Publisher · View at Google Scholar
  • R. Shabu, A. Moses Ezhil Raj, C. Sanjeeviraja, and C. Ravidhas, “Assessment of CuO thin films for its suitablity as window absorbing layer in solar cell fabrications,” Materials Research Bulletin, 2015. View at Publisher · View at Google Scholar
  • A. Seyhun Kipca, Fatma Tugce Senberber, Sureyya Aydin Yuksel, Emek Moroydor Derun, and Sabriye Piskin, “Synthesis, characterisation, electrical and optical properties of copper borate compounds,” Materials Research Bulletin, 2015. View at Publisher · View at Google Scholar
  • Klaudia Czaniková, Igor Krupa, Dušan Račko, Vasilij Šmatko, Eva M Campo, Ewa Pavlova, and Mária Omastová, “ In situ electron microscopy of Braille microsystems: photo-actuation of ethylene vinyl acetate/carbon nanotube composites ,” Materials Research Express, vol. 2, no. 2, pp. 025601, 2015. View at Publisher · View at Google Scholar
  • Roberta F. Bonan, Paulo R. F. Bonan, Andre U. D. Batista, Fabio C. Sampaio, Allan J. R. Albuquerque, Maria C. B. Moraes, Luiz H. C. Mattoso, Gregory M. Glenn, Eliton S. Medeiros, and Juliano E. Oliveira, “In vitro antimicrobial activity of solution blow spun poly(lactic acid)/polyvinylpyrrolidone nanofibers loaded with Copaiba (Copaifera sp.) oil,” Materials Science & Engineering C-Materials For Biological Applications, vol. 48, pp. 372–377, 2015. View at Publisher · View at Google Scholar
  • Yan Ma, Dominic Cuiuri, Nicholas Hoye, Huijun Li, and Zengxi Pan, “The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding,” Materials Science and Engineering: A, vol. 631, pp. 230–240, 2015. View at Publisher · View at Google Scholar
  • H.P. Tang, G.Y. Yang, W.P. Jia, W.W. He, S.L. Lu, and M. Qian, “Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting,” Materials Science and Engineering: A, 2015. View at Publisher · View at Google Scholar
  • Abdalla Abdal-hay, Abdel Salam Hamdy, Khalil Abdelrazek Khalil, and Ju Hyun Lim, “A Novel Simple One-step Air Jet Spinning Approach for Deposition of Poly(vinyl actate)/Hydroxyapatite Composite Nanofibres on Ti Implants,” Materials Science and Engineering: C, 2015. View at Publisher · View at Google Scholar
  • Luis Pompa, Zia Ur Rahman, Edgar Munoz, and Waseem Haider, “Surface characterization and cytotoxicity response of biodegradable magnesium alloys,” Materials Science and Engineering: C, vol. 49, pp. 761–768, 2015. View at Publisher · View at Google Scholar
  • Y. Ashok Kumar Reddy, In-ku Kang, Young Bong Shin, Hee Chul Lee, and P. Sreedhara Reddy, “Oxygen partial pressure and thermal annealing dependent properties of RF magnetron sputtered TiO2-x films,” Materials Science In Semiconductor Processing, vol. 32, pp. 107–116, 2015. View at Publisher · View at Google Scholar
  • A. Bouzidi, W. Jilani, and H. Guermazi, “Preparation and electrical properties in epoxy resin/In2O3:Sn nanocomposites materials for optoelectronics,” Materials Science in Semiconductor Processing, vol. 34, pp. 334–342, 2015. View at Publisher · View at Google Scholar
  • Mahmoud M. K. Helal, and Fathallah Elsayed, “Dynamic behavior of stiffened plates under underwater shock loading,” Materials Testing, vol. 57, no. 6, pp. 506–517, 2015. View at Publisher · View at Google Scholar
  • M. Alemi-Ardakani, A.S. Milani, S. Yannacopoulos, and G. Shokouhi, “A Multicriteria Experimental Analysis of Impact on Fiber Reinforced Polymer Composite Laminates,” Materials Today Communications, 2015. View at Publisher · View at Google Scholar
  • Yoshiyuki Suda, Yoshiaki Shimizu, Masahiro Ozaki, Hideto Tanoue, Hirofumi Takikawa, Hitoshi Ue, Kazuki Shimizu, and Yoshito Umeda, “Electrochemical properties of fuel cell catalysts loaded on carbon nanomaterials with different geometries,” Materials Today Communications, 2015. View at Publisher · View at Google Scholar
  • Zhenhong Wang, Yi Liu, Guoxin Zhang, and Shuping Yu, “Sensitivity Analysis of Temperature Control Parameters and Study of the Simultaneous Cooling Zone during Dam Construction in High-Altitude Regions,” Mathematical Problems in Engineering, vol. 2015, pp. 1–12, 2015. View at Publisher · View at Google Scholar
  • Philipp von Witzendorff, Stefan Kaierle, Oliver Suttmann, and Ludger Overmeyer, “In Situ Observation of Solidification Conditions in Pulsed Laser Welding of AL6082 Aluminum Alloys to Evaluate Their Impact on Hot Cracking Susceptibility,” Metallurgical and Materials Transactions A, 2015. View at Publisher · View at Google Scholar
  • Ahmad Chamanfar, Mohammad Jahazi, and Jonathan Cormier, “A Review on Inertia and Linear Friction Welding of Ni-Based Superalloys,” Metallurgical and Materials Transactions A, 2015. View at Publisher · View at Google Scholar
  • Ismaila Kayode Aliyu, Nouari Saheb, Syed Fida Hassan, and Nasser Al-Aqeeli, “Microstructure and Properties of Spark Plasma Sintered Aluminum Containing 1 wt.% SiC Nanoparticles,” Metals, vol. 5, no. 1, pp. 70–83, 2015. View at Publisher · View at Google Scholar
  • Maria Antonia Escudero Francos, Rosana Badía-Laíño, and Marta Elena Díaz-García, “Fluorescence sensitization of gold-glutathione nanoclusters by aqueous solutions of sodium and potassium ions,” Microchimica Acta, 2015. View at Publisher · View at Google Scholar
  • Yi-Wei Tseng, Fei-Yi Hung, and Truan-Sheng Lui, “Microstructure, tensile and electrical properties of gold-coated silver bonding wire,” Microelectronics Reliability, 2015. View at Publisher · View at Google Scholar
  • Mojtaba Amjadipour, Dzung Viet Dao, and Nunzio Motta, “Vibration analysis of initially curved single walled carbon nanotube with vacancy defect for ultrahigh frequency nanoresonators,” Microsystem Technologies, 2015. View at Publisher · View at Google Scholar
  • Jianshi Tang, and Kang L. Wang, “Electrical spin injection and transport in semiconductor nanowires: challenges, progress and perspectives,” Nanoscale, vol. 7, no. 10, pp. 4325–4337, 2015. View at Publisher · View at Google Scholar
  • Xiuli Du, Liu Jin, and Renbo Zhang, “Chloride diffusivity in saturated cement paste subjected to external mechanical loadings,” Ocean Engineering, vol. 95, pp. 1–10, 2015. View at Publisher · View at Google Scholar
  • Chia-Hung Hung, Fuh-Yu Chang, Tien-Li Chang, Yu-Ting Chang, Kai-Wen Huang, and Po-Chin Liang, “Micromachining NiTi tubes for use in medical devices by using a femtosecond laser,” Optics and Lasers in Engineering, vol. 66, pp. 34–40, 2015. View at Publisher · View at Google Scholar
  • Raluca-Sorina Penciu, Vassilis Paltoglou, and Nikolaos K. Efremidis, “Closed-form expressions for nonparaxial accelerating beams with pre-engineered trajectories,” Optics Letters, vol. 40, no. 7, pp. 1444–1447, 2015. View at Publisher · View at Google Scholar
  • Zhi-Gang Wang, Wen-Zhi Bi, Shu-Cui Ma, Nan Lv, Ji-Lin Zhang, De-Hui Sun, and Jia-Zuan Ni, “ Facet-Dependent Effect of Well-Defined CeO 2 Nanocrystals on the Adsorption and Dephosphorylation of Phosphorylated Molecules ,” Particle & Particle Systems Characterization, 2015. View at Publisher · View at Google Scholar
  • Alinda R. Fernandes, Christopher F. Adams, David N. Furness, and Divya M. Chari, “Early Membrane Responses to Magnetic Particles are Predictors of Particle Uptake in Neural Stem Cells,” Particle & Particle Systems Characterization, 2015. View at Publisher · View at Google Scholar
  • G. Guillonneau, G. Kermouche, J. Teisseire, E. Barthel, S. Bec, and J.-L. Loubet, “Is the second harmonic method applicable for thin films mechanical properties characterization by nanoindentation?,” Philosophical Magazine, pp. 1–13, 2015. View at Publisher · View at Google Scholar
  • K. V. Egorov, R. V. Kirtaev, Yu Yu Lebedinskii, A. M. Markeev, Yu A. Matveyev, O. M. Orlov, A. V. Zablotskiy, and A. V. Zenkevich, “Complementary and bipolar regimes of resistive switching in TiN/HfO2/TiN stacks grown by atomic-layer deposition,” Physica Status Solidi A-Applications And Materials Science, vol. 212, no. 4, pp. 809–816, 2015. View at Publisher · View at Google Scholar
  • Juan Gabriel Ramirez, Thomas Saerbeck, Siming Wang, J. Trastoy, M. Malnou, J. Lesueur, Jean-Paul Crocombette, Javier E. Villegas, and Ivan K. Schuller, “Effect of disorder on the metal-insulator transition of vanadium oxides: Local versus global effects,” Physical Review B, vol. 91, no. 20, 2015. View at Publisher · View at Google Scholar
  • M. Claudia Troparevsky, James R. Morris, Paul R. C. Kent, Andrew R. Lupini, and G. Malcolm Stocks, “Criteria for Predicting the Formation of Single-Phase High-Entropy Alloys,” Physical Review X, vol. 5, no. 1, 2015. View at Publisher · View at Google Scholar
  • P. Gaudio, A. Malizia, M. Camplani, F. Barbato, L. Antonelli, M. Gelfusa, M. Del Vecchio, L. Salgado, C. Bellecci, and M. Richetta, “Shadowgraph Technique Applied to STARDUST Facility for Dust Tracking: First Results,” Physics Procedia, vol. 62, pp. 97–101, 2015. View at Publisher · View at Google Scholar
  • Farhana Tisa, Meysam Davoody, Abdul Aziz Abdul Raman, and Wan Mohd Ashri Wan Daud, “Degradation and Mineralization of Phenol Compounds with Goethite Catalyst and Mineralization Prediction Using Artificial Intelligence,” Plos One, vol. 10, no. 4, 2015. View at Publisher · View at Google Scholar
  • Ivan Tchernook, Janett Prehl, and Joachim Friedrich, “Quantum chemical investigation of the counter anion in the acid catalyzed initiation of 2,2’-spirobi[4H-1,3,2-benzodioxasiline] polymerization,” Polymer, 2015. View at Publisher · View at Google Scholar
  • D. Jaaoh, C. Putson, and N. Muensit, “Deformation on segment-structure of electrostrictive polyurethane/polyaniline blends,” Polymer, 2015. View at Publisher · View at Google Scholar
  • Yanrong Geng, Tao Dong, Pengtao Fang, Qing Zhou, Xingmei Lu, and Suojiang Zhang, “Fast and effective glycolysis of poly(ethylene terephthalate) catalyzed by polyoxometalate,” Polymer Degradation and Stability, vol. 117, pp. 30–36, 2015. View at Publisher · View at Google Scholar
  • Agnese Grigaloviča, Remo Merijs Meri, Jānis Zicāns, Jānis Grabis, and Andrey Aniskevich, “Aging of Nanosized ZnO Modified Polyoxymethylene Blends with Ethylene Octene Copolymer,” Polymer-Plastics Technology and Engineering, pp. 150401114711003, 2015. View at Publisher · View at Google Scholar
  • Pengxiang Si, Jikui Wang, Cong Zhao, Heng Xu, Kun Yang, and Wenqi Wang, “Preparation and morphology control of three-dimensional interconnected microporous PDMS for oil sorption,” Polymers for Advanced Technologies, 2015. View at Publisher · View at Google Scholar
  • B. S. Mocker, A. M. Matz, N. Jost, and P. Krug, “Microstructural Characterization of Open-Pore Metal Foams of Pure Metals,” Practical Metallography, vol. 52, no. 2, pp. 83–107, 2015. View at Publisher · View at Google Scholar
  • M. Manjaiah, S. Narendranath, S. Basavarajappa, and V.N. Gaitonde, “Effect of Electrode Material in Wire Electro Discharge Machining Characteristics of Ti50Ni50-xCux Shape Memory Alloy,” Precision Engineering, 2015. View at Publisher · View at Google Scholar
  • Claudiu Aciu, Daniela Lucia Manea, Luminita Monica Molnar, and Elena Jumate, “Recycling of Polystyrene Waste in the Composition of Ecological Mortars,” Procedia Technology, vol. 19, pp. 498–505, 2015. View at Publisher · View at Google Scholar
  • Brennan M. Bailey, Yves Leterrier, S.J. Garcia, S. van der Zwaag, and Véronique Michaud, “Electrically conductive self-healing polymer composite coatings,” Progress in Organic Coatings, vol. 85, pp. 189–198, 2015. View at Publisher · View at Google Scholar