Journal Menu
- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
ElectroComponent Science and Technology
Volume 6 (1980), Issue 3-4, Pages 173-175
doi:10.1155/APEC.6.173
Hybrid Electronic Watt-Hour Meter
University of Ljubljana, Faculty of Electrical Engineering Tržaška 25, Ljubljana 61000, Slovenia
Received 11 June 1979
Copyright © 1980 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Abstract
An electronic watt–hour meter in hybrid thick and thin film technology is described. Benefits of combined hybrid technologies are evaluated. Methods for offset voltage and multiplier modulation frequency are given. The hybrid circuit with the 10−5 linearity for a 0.1 class electricity meter is shown.