Editorial Board

• S. Acharya, Louisiana State University, USA
• Abdollah A. Afjeh, The University of Toledo, USA
• Hyeong Joon Ahn, Soongsil University, Korea
• Ryo S. Amano, University of Wisconsin-Milwaukee, USA
• Forrest E. Ames, University of North Dakota, USA
• Luis San Andres, Texas A and M University, USA
• Jerome Antoni, Université de Technologie de Compiègne, France
• S. V. Apte, Oregon State University, USA
• Hans Joerg Bauer, University of Karlsruhe, Germany
• Donald E. Bently, Bently Pressurized Bearing Company, USA
• Dieter E. Bohn, RWTH Aachen University, Germany
• Gerard BOIS, LML/ENSAM, France
• Christopher Earls Brennen, California Institute of Technology, USA
• Mustafa Canakci, Kocaeli University, Turkey
• Giovanni Maria Carlomagno, Università degli Studi di Naploli, Italy
• M. K. Chyu, University of Pittsburgh, USA
• Alessandro Corsini, Sapienza University of Rome, Italy
• Ningsheng Feng, University of New South Wales, Australia
• David P. Fleming, NASA, USA
• Koji Fujimoto, University of Tokyo, Japan
• Luis Gato, Instituto Superior Técnico, Portugal
• Georges A. Gerolymos, Université Pierre et Marie CURIE, France
• J Paul Gostelow, University of Leicester, United Kingdom
• Chunill Hah, NASA, USA
• Eric J. Hahn, University of New South Wales, Australia
• Awatef Hamed, University of Cincinnati, USA
• J-C. Han, Texas A&M University, USA
• Hiroshi Hayami, Kyushu University, Japan
• T. Hayat, Quaid-I-Azam University, Pakistan
• Robert C. Hendricks, NASA, USA
• H. Heshmat, Mohawk Innovative Technology, Inc., USA
• Dimitrios T. Hountalas, National Technical University of Athens, Greece
• Zuohua Huang, Xi'an Jiaotong University, China
• Norihiko Iki, National Institute of AIST, Japan
• Tariq Iqbal, Memorial University of Newfoundland, Canada
• Masaru Ishizuka, Toyama Prefectural University, Japan
• Takuzo Iwatsubo, Kansai University, Japan
• David Japikse, Concepts NREC, USA
• Yasutomo Kaneko, Ryukoku University, Japan
• Kazuhiko Kawaike, Daido Metal Co., Japan
• Funazaki Ken-ichi, Iwate University, Japan
• Tong Seop Kim, Inha University, Korea
• Spyros A. Kinnas, University of Texas at Austin, USA
• R. G. Kirk, Virginia Tech, Department of Mechanical Engineering, Blacksburg, USA
• Ching-Pang Lee, GE Aircraft Engines, USA
• Arthur W. Lees, Swansea University, United Kingdom
• Ricardo F. Martinez-Botas, Imperial College London, United Kingdom
• Shigenao Maruyama, Tohoku University, Japan
• H. Masjuki, University of Malaya, Malaysia
• Eric Maslen, Department of Integrated Science and Technology James Madison University, USA
• Fabian Mauss, Technische Universität Cottbus, Germany
• David U. Mba, Cranfield University, United Kingdom
• Jiun-Jih Miau, National Cheng-Kung University, Taiwan
• Akira Murata, Tokyo University of Agriculture and Technology, Japan
• Agnes Muszynska, A.M. Consulting, USA
• Vengalattore T. Nagaraj, University of Maryland, USA
• M. Razi Nalim, Indiana University-Purdue University Indianapolis, USA
• E.Y.K. Ng, Nanyang Technological University, Singapore
• Osamu Nozaki, Japan Aerospace Exploration Agency, Japan
• Yutaka Ohta, Waseda University, Japan
• Takanari Okamura, Hachinohe Institute of Technology, Japan
• Yoji Okita, Ishikawajima-Harima Heavy Industries, Japan
• Ion Paraschivoiu, École Polytechnique de Montréal , Canada
• R. Payri, Universidad Politécnica de Valencia, Spain
• Paolo Pennacchi, Politecnico di Milano, Italy
• Sergio Preidikman, Universidad Nacional de Córdoba, USA
• Richard B. Rivir, Air Force Research Laboratory/PRTT, USA
• Thomas Sattelmayer, Technical University of Muenchen, Germany
• Jerzy T. Sawicki, Cleveland State University, USA
• Meinhard Taher Schobeiri, Texas A&M University, USA
• Enrico Sciubba, Università degli studi di Roma La Sapienza, Italy
• Terrence W. Simon, University of Minnesota, USA
• ONKAR SINGH, Guru Nanak Dev University, India
• Seung Jin Song, Seoul National University, Korea
• Toyotaka Sonoda, Honda, Japan
• Fengrui Sun, University of Strathclyde, United Kingdom
• Ken-Ichiro Takeishi, Osaka University, Japan
• Hamid A. Toliyat, Texas A&M University, USA
• Wei Tong, Danaher Corp, USA
• Yoshinobu Tsujimoto, Osaka University, Japan
• Ting Wang, The University of New Orleans, USA
• Toshinori Watanabe, University of Tokyo, Japan
• Bernhard Weigand, University of Stuttgart, Germany
• Dave Wisler, GE Aircraft Engines, USA
• Sigmar L. K. Wittig, University of Karlsruhe, Germany
• Kazuyuki Yamaguchi, Hitachi, Japan
• Yasuyuki Yokono, The University of Tokyo, Japan
• Saburou Yuasa, Tokyo Metropolitan University, Japan