Robust Reservoir Generation by Correlation-Based Learning
Figure 4
Embedding two sequences in a
single reservoir. (a) Schematic of the simulation. Ten sets of trials of the
simulation were conducted. Each set of trials consisted of a pair of CS1 trials
and a successive pair of CS2 trials. Reproducibility indices between (1) CS1
trials at the 1st trial set, (2) CS2 trials at the 1st trial set, (3) CS1
trials at the last trial set, and (4) CS2 trials at the last trial set were
calculated and labeled as RI1, RI2, RI3, and RI4, respectively. (b)
Reproducibility indices obtained from simulations. RI1 (gray solid line), RI2
(gray dotted line), RI3 (black solid line), and RI4 (black dotted line) were
plotted. Conventions as in Figure 2(c).
