Abstract
Objective. To evaluate the effects of various surface conditioning methods and agents. Methods. The intaglio zirconia substrates were air particle abraded with
Objective. To evaluate the effects of various surface conditioning methods and agents. Methods. The intaglio zirconia substrates were air particle abraded with
K. M. Itinoche, M. Özcan, M. A. Bottino, and D. Oyafuso, “Effect of mechanical cycling on the flexural strength of densely sintered ceramics,” Dental Materials, vol. 22, no. 11, pp. 1029–1034, 2006.
View at: Publisher Site | Google ScholarH. Lüthy, F. Filser, O. Loeffel, M. Schumacher, L. J. Gauckler, and C. H. F. Hammerle, “Strength and reliability of four-unit all-ceramic posterior bridges,” Dental Materials, vol. 21, no. 10, pp. 930–937, 2005.
View at: Publisher Site | Google ScholarJ. Tinschert, D. Zwez, R. Marx, and K. J. Anusavice, “Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics,” Journal of Dentistry, vol. 28, no. 7, pp. 529–535, 2000.
View at: Google ScholarG. A. Borges, A. M. Sophr, M. F. de Goes, L. C. Sobrinho, and D. C. N. Chan, “Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics,” Journal of Prosthetic Dentistry, vol. 89, no. 5, pp. 479–488, 2003.
View at: Publisher Site | Google ScholarH. Lüthy, O. Loeffel, and C. H. F. Hammerle, “Effect of thermocycling on bond strength of luting cements to zirconia ceramic,” Dental Materials, vol. 22, no. 2, pp. 195–200, 2006.
View at: Publisher Site | Google ScholarH. F. Kappert and M. Krah, “Keramiken—eine Übersicht,” Quintessenz Zahntech, vol. 2, pp. 668–704, 2001.
View at: Google ScholarJ. W. Thurmond, W. W. Barkmeier, and T. M. Wilwerding, “Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain,” The Journal of Prosthetic Dentistry, vol. 72, no. 4, pp. 355–359, 1994.
View at: Google ScholarM. Kern and S. M. Wegner, “Bonding to zirconia ceramic: adhesion methods and their durability,” Dental Materials, vol. 14, no. 1, pp. 64–71, 1998.
View at: Google ScholarJ. P. Matinlinna, L. V. J. Lassila, M. Özcan, A. Yli-Urpo, and P. K. Vallittu, “An introduction to silanes and their clinical applications in dentistry,” International Journal of Prosthodontics, vol. 17, no. 2, pp. 155–164, 2004.
View at: Google ScholarM. Kern and V. P. Thompson, “Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability,” The Journal of Prosthetic Dentistry, vol. 73, no. 3, pp. 240–249, 1995.
View at: Google ScholarC. K. Kajdas, “Importance of the triboemission process for tribochemical reaction,” Tribology International, vol. 38, no. 3, pp. 337–353, 2005.
View at: Publisher Site | Google ScholarR. Guggenberger, “Das Rocatec-System—Haftung durhc ribochemische Beschichtung,” Deutsche Zahnarztliche Zeitschrift, vol. 44, no. 11, pp. 874–876, 1989.
View at: Google ScholarJ. P. Matinlinna and P. K. Vallittu, “Silane based concepts on bonding resin composite to metals,” Journal of Contemporary Dental Practice, vol. 8, no. 2, pp. 001–008, 2007.
View at: Google ScholarR. Janda, J.-F. Roulet, M. Wulf, and H.-J. Tiller, “A new adhesive technology for all-ceramics,” Dental Materials, vol. 19, no. 6, pp. 567–573, 2003.
View at: Publisher Site | Google ScholarS. S. Atsu, M. A. Kilicarslan, H. C. Kucukesmen, and P. S. Aka, “Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin,” Journal of Prosthetic Dentistry, vol. 95, no. 6, pp. 430–436, 2006.
View at: Publisher Site | Google ScholarF. Komine, M. Tomic, T. Gerds, and J. R. Strub, “Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns,” Journal of Prosthetic Dentistry, vol. 92, no. 4, pp. 359–364, 2004.
View at: Publisher Site | Google ScholarM. Özcan and P. K. Vallittu, “Effect of surface conditioning methods on the bond strength of luting cement to ceramics,” Dental Materials, vol. 19, no. 8, pp. 725–731, 2003.
View at: Publisher Site | Google ScholarM. N. Aboushelib, C. J. Kleverlaan, and A. J. Feilzer, “Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials,” Journal of Prosthetic Dentistry, vol. 98, no. 5, pp. 379–388, 2007.
View at: Publisher Site | Google ScholarJ. P. Matinlinna, L. V. J. Lassila, and P. K. Vallittu, “The effect of three silane coupling agents and their blends with a cross-linker silane on bonding a bis-GMA resin to silicatized titanium (a novel silane system),” Journal of Dentistry, vol. 34, no. 10, pp. 740–746, 2006.
View at: Publisher Site | Google ScholarJ. P. Matinlinna, L. V. J. Lassila, and P. K. Vallittu, “The effect of five silane coupling agents on the bond strength of a luting cement to a silica-coated titanium,” Dental Materials, vol. 23, no. 9, pp. 1173–1180, 2007.
View at: Publisher Site | Google ScholarJ. P. Matinlinna, L. V. J. Lassila, and P. K. Vallittu, “Pilot evaluation of resin composite cement adhesion to zirconia using a novel silane system,” Acta Odontologica Scandinavica, vol. 65, no. 1, pp. 44–51, 2007.
View at: Publisher Site | Google ScholarR. van Noort, S. Noroozi, I. C. Howard, and G. Cardew, “A critique of bond strength measurements,” Journal of Dentistry, vol. 17, no. 2, pp. 61–67, 1989.
View at: Google ScholarISO 10477, “Dentistry —Polymer-Based Crown and Bridge Materials,” Amendment, 1996.
View at: Google ScholarM. S. Gale and B. W. Darvell, “Thermal cycling procedures for laboratory testing of dental restorations,” Journal of Dentistry, vol. 27, no. 2, pp. 89–99, 1999.
View at: Publisher Site | Google ScholarG. J. P. Fleming and O. Narayan, “The effect of cement type and mixing on the bi-axial fracture strength of cemented aluminous core porcelain discs,” Dental Materials, vol. 19, no. 1, pp. 69–76, 2003.
View at: Publisher Site | Google ScholarB.-K. Kim, H. E.-K. Bae, J.-S. Shim, and K.-W. Lee, “The influence of ceramic surface treatments on the tensile bond strength of composite resin to all-ceramic coping materials,” Journal of Prosthetic Dentistry, vol. 94, no. 4, pp. 357–362, 2005.
View at: Publisher Site | Google ScholarJ. P. Matinlinna, T. Heikkinen, M. Özcan, L. V. J. Lassila, and P. K. Vallittu, “Evaluation of resin adhesion to zirconia ceramic using some organosilanes,” Dental Materials, vol. 22, no. 9, pp. 824–831, 2006.
View at: Publisher Site | Google ScholarT. F. Child and W. J. van Ooij, “Application of silane technology to prevent corrosion of metals and improve paint adhesion,” Transactions of the Institute of Metal Finishing, vol. 77, no. 2, pp. 64–70, 1999.
View at: Google ScholarT. T. Heikkinen, L. V. J. Lassila, J. P. Matinlinna, and P. K. Vallittu, “Thermocycling effects on resin bond to silicatized and silanized zirconia,” Journal of Adhesion Science and Technology, vol. 23, no. 7-8, pp. 1043–1051, 2009.
View at: Publisher Site | Google ScholarT. Wada, “Development of a new adhesive material and its properties,” in Proceedings of the International Symposium on Adhesive Prosthodontics, L. Gettleman, M. M. A. Vrijhoef, and Y. Uchiyama, Eds., Academy of Dental Materials, Amsterdam, The Netherlands, June 1986.
View at: Google ScholarM. Wolfart, F. Lehmann, S. Wolfart, and M. Kern, “Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods,” Dental Materials, vol. 23, no. 1, pp. 45–50, 2007.
View at: Publisher Site | Google ScholarY. Taira, K. Yoshida, H. Matsumura, and M. Atsuta, “Phosphate and thiophosphate primers for bonding prosthodontic luting materials to titanium,” The Journal of Prosthetic Dentistry, vol. 79, no. 4, pp. 384–388, 1998.
View at: Google ScholarS. R. Hall, T. E. Fischer, P. Gruffel, and C. Carry, “Effect of grain boundary dopants and mean grain size on tribomechanical behavior of highly purified -alumina in the mild wear regime,” Wear, vol. 181–183, pp. 165–177, 1995.
View at: Google ScholarG. B. Prabhu and D. L. Bourell, “The hot hardness testing for superplasticity in nanocrystalline Yttria Stabilized Tetragonal Zirconia,” Scripta Metallurgica et Materiala, vol. 33, no. 5, pp. 761–766, 1995.
View at: Google Scholar