Abstract

Poly(hydroxamic acid) resin (PHA) was prepared by modification of polyacrylamide (PAAm) prepared through -irradiation technique and used for the first time in separation of Zr(IV) from Y(III) and Sr(II) as a simulation mode for the purification of 89Zr from its parents (Y or Sr). The adsorption behaviors of zirconium, yttrium, and strontium on the prepared PHA resin in different media, namely, hydrochloric acid, acetate buffer, and citrate buffer were studied as a function of pH. In addition, in cation-exchange column chromatography experiments using PHA, three different eluants, namely,  mol/L HCl, acetate buffer pH 3.5, and 2 mol/L HCl, were employed for elution of Zr(IV), Y(III) and Sr(II), respectively, where Zr(IV), Y(III) and Sr(II) were eluted in amounts of 80%, 99.9%, and 100%, respectively. The purification process of Y(III) from Zr(IV) was carried out using regenerated PHA.

1. Introduction

Hydroxamic acids have been known for their chelation ability with heavy metals. They have been found to be effective chelating ligands with the ions such as V5+, Fe3+, Mo6+, Ti4+, Hg2+, Cu2+, and UO22+ [1]. Number of chelating polymers, containing hydroxamic acid group, have been prepared from various starting materials using different methods. Poly(hydroxamic acid) was synthesized from polyacrylamide at different conditions [25]. They have been known for various analytical applications. For example, extraction and purification of uranium [6], extraction and separation of gold and silver [7], separations of iron from copper, nickel, and cobalt [8], copper from lead [9], uranium from neodymium [10], and cobalt from copper and nickel [11]. Also a preliminary study on application of sago starch-based poly(hydroxamic acid) resin for extraction of lanthanide group elements (La3+, Dy3+, Pr3+, Ce3+, Nd3+, Gd3+, Eu3+, and Tb3+) from aqueous media was done by using batch technique [12]. The chelating polymer materials are mainly used in analytical, industrial and radiochemical laboratories [12].

One of the main tasks of radiochemical laboratories is the purification of radionuclides from their matrix. The medical interest radionuclides such as β+ emitters have been developed [13]. One of them, 89Zr ( h), can be produced by either of two routes, namely, alpha irradiation of strontium [14] or proton irradiation of yttrium [15]. For radiochemical purification of zirconium from yttrium and strontium, early studies were based on the solvent extraction and the ion-exchange chromatography [1618], but only a limited extent of purification is still there. Here, in this study, the Poly(hydroxamic acid) resin (PHA) will be prepared by modification of polyacrylamide (PAAm) (that was prepared through γ-irradiation technique) and will be used for the first time in separation of Zr from Y and Sr as a simulation mode for promising rise in purification of 89Zr from its parents (Y and Sr).

2. Experimental

2.1. Chemicals and Reagents

Acrylamide used in this study was obtained from Merck (Darmstadt, Germany). N,N-methylene-bis-acrylamide (NMBA) was used as a crosslinking agent, and it was obtained from Sigma-Aldrich (St. Loius, MO, USA). Hydrochloric acid and sodium hydroxide were used to adjust the pH of the medium were obtained from Merck, hydroxylamine hydrochloride from Fluka (Buchs, Switzerland). Y2O3 99.97% from Koch-Light Laboratories Ltd, (Cambridge, England); zirconyl chloride octahydrate ZrOCl28H2O 98% (Aldrich); strontium carbonate 99.99% from Alfa Aesar Co., Karlsruhe, Germany). Other chemicals used were of analytical reagent grade.

2.2. Instrumentation

The content of the separated material was determined via inductively coupled plasma optical emission spectrometry (ICP-OES) using the system ULTIMA2 ICP, Jobin Yvon S. A., France. The specifications of the device and operating conditions are given in Tables 1 and 2, respectively.

2.2.1. Gamma Cell

A cobalt-60 gamma cell of type MC-20 (Russia) was used as irradiation source, with a dose rate of 2 KGy h−1; it has two chambers of 5 liters.

2.2.2. FT-IR Analysis

Infrared spectra of polymer samples with KBr pellets were obtained from FT-IR spectrometer (Bomen, Hartman & Borunz spectrometer, Model MB 157, Canada).

2.3. Preparation of Poly(Hydoxamic Acid)

Crosslinked Polyacrylamide (PAAm) was prepared by radiation-induced polymerization of acrylamide monomers in aqueous solution in the presence of (NMBA) as a crosslinking agent [19]. About 10 g of acrylamide and 1 g of (NMBA) were dissolved in 100 mL distilled water. The mixture was transferred into glass ampoules and nitrogen gas was purged into the ampoules to remove air from the solution. The glass ampoules were sealed and then subjected to 60Co γ-rays at a dose rate of 2 kGyh−1. After irradiation, the crosslinked obtained polymers were cut into small pieces that were washed in acetone for removal of unreacted monomers then dried and stored. The percent conversion was determined gravimetrically and was about 90%.

For preparation of PHA in hydrogen form [20], the solution of a calculated amount of hydroxylamine hydrochloride and solution of sodium hydroxide were added to a suspension of dry crosslinked PAAm. The resulting mixture was stirred for 5 min at the room temperature. The reaction was continued for 6 h at 70°C. Ammonia was liberated during the reaction. After completion of the reaction, the resin was separated from the solution by filtration and washed several times with water. Then, the resin was treated with 3 mol/L HCl solution for at least 5 min. Finally, the resin was filtered and washed several times with water till it is chlorine-free, and then dried at 50°C to a constant weight.

2.4. Batch Experiments

For separation of Zr(IV) from both Y(III) and Sr(II), it is necessary to determine the distribution coefficient. A stock solution of 5000 mg/L of each zirconium, yttrium, and strontium (strontium was only dissolved in a cold HCl) was prepared by dissolving in a hot concentration HCl solution. The solution was evaporated to incipient dryness, and the residue dissolved in 100 mL of double distilled water. To 100 μL of this solution, 4.9 mL different concentrations of HCl or other mediums such as 0.1 mol/L of citrate buffer or 0.1 M of acetate buffer at variable pH were added to a fixed weight of resin (50 mg). The contents were shaken for 2 hours to attain equilibrium. From the separated two phases (solid and liquid), the distribution coefficient () was obtained using the following equation [21]:𝐾𝑑=𝐶ads𝐶unads×𝑉𝑚,(1) where is the concentration sorbed on the resin, is the remaining concentration in solution, is the volume of the aqueous phase in mL, and m is the mass of the resin in grams. For all batch experiments, determination of zirconium, yttrium, and strontium concentrations will be measured by using inductively coupled plasma optical emission spectrometry (ICP-OES).

2.5. Cation-Exchange Column Chromatography

An extensive study for separation of Zr(IV) from both Y(III) and Sr(II) via PHA resin using different eluants, namely, 10−5 mol/L HCl, acetate buffer, and 2 mol/L HCl was carried out in this work.

A 100 mL stock solution containing 100 ppm of each Zr, Y, and Sr dissolved in 10−5 mol/L HCl was loaded onto a glass column, 22 cm long × 1.5 cm in diameter, packed with PHA with depth of 2 cm. Quartz wool was put at the top exchanger to prevent disturbance of the adsorbent particles during addition of solution and to regulate flow of solutions through the column. A 1 mL stock sample was retained as a control. Load samples were taken to test for breakthrough during this step. Inductively coupled plasma (ICP) analysis of the load samples showed no breakthrough of Y and Sr from the column while Zr passes through. The column was washed with further 50 mL of the same loading solution (without metals). About 150 mL of 0.1 mol/L acetate buffer with pH 3.5 and flow rate (~1.5 mL/min) was used for the elution process of Sr. The samples were collected (~16.5 mL); a total of 9 samples were collected and analyzed by ICP. To remove the Y, about 150 mL of 2 mol/L HCl was used. The details of the separation process will be given below.

3. Results and Discussion

3.1. Preparation of the Resin

PHA resin was prepared from the reaction of the corresponding crosslinked PAAm with hydroxylamine hydrochloride [20], and sodium hydroxide. A schematic presentation of possible reaction between PAAm and hydroxylamine hydrochloride with sodium hydroxide to form hydrogen and sodium form of PHA is shown in Scheme 1.

638090.sch.001
3.2. FT-IR Analysis

The IR spectra recorded for the (a) polyacrylamide (PAAm), (b) poly(hydroxamic acid) (PHA), and (c) metal loaded PHA samples are given in Figure 1. From Table 3, the infrared spectrum of crosslinked PAAm shows the characteristic absorption bands of amide (N–H), CH2 stretching and carbonyl groups at 3401, 2998, and 1649 cm−1, respectively. The infrared spectrum of PHA resin showed the characteristic absorption bands of hydroxamic (O–H), amide (N–H), carbonyl and (N–O) groups at 3200, 3444, 1670 and 930 cm−1. The absorption band at 2862 cm−1 is related to C=N group in enol form of hydroxamic acid. Comparison of spectra of the PHA sample and metal ion loaded PHA sample show a shift in the N–O band from 930 to 775 cm−1 in the metal ion loaded sample as a result of interaction of corresponding groups with metal ions. This indicates a strong interaction of metal ions with the N–O group of the sorbent and as the M–O bond is stronger, the N–O bond exhibits lower stretching frequency. Additional peaks at around 700 cm−1 can also be seen which are characteristic of O–M–O stretching vibrations. The possible interactions between metal ions and PHA polymers are shown in Scheme 2 [22].

638090.sch.002
3.3. Adsorption Behaviors of Zr, Y, and Sr on Cation Exchangers

The adsorption behaviors of zirconium, yttrium, and strontium on synthetic PHA resin in different media, namely, hydrochloric acid, acetate buffer, and citrate buffer were studied. However, the effect of equilibrium time has been studied as a function of uptake for each element in batch mode, where the equilibrium was achieved after 2 h of shaking.

3.3.1. Hydrochloric Acid

Figure 2 shows the relationship between the distribution coefficients (-values) of these elements and the concentration of hydrochloric acid on PHA, where Y and Sr both showed the same adsorption behaviour over the acidity range of 10−5–1 mol/L where within the acidity range of 10−5–10−3 mol/L their -values increase with increasing the concentration of the acid and then decrease with acidity increase till 0.1 mol/L. On the other hand, for zirconium, the -values increase globally with HCl concentration from 10−5 mol/L to 1 mol/L where at 10−5 mol/L HCl zirconium showed no specific adsorption () while over the concentration range 10−4–10−2 mol/L the adsorbability was relatively low and almost constant (~10); however, the adsorbability after 10−2 mol/L was rather high. The results given also show that the adsorbability in the reverse order, Sr(II) > Y(III) > Zr(IV), this may be due to the formation of hydrated complexes of Y in diluted acid and zirconium is hydrolysed in aqueous HCl of varying concentrations; a variety of intermediate hydrolysis products, such as the oxochlorides MOCl2, are formed [23].

3.3.2. 0.1 mol/L Acetate Buffer

Figure 3 illustrates the adsorption behavior of Zr, Y, and Sr in 0.1 mol/L acetate buffer over the pH range 3 to 5.5. Where at pH 3.5 they have the drop in -values. After this drop over the pH range 3.5–5.5, the adsorbability of Y and Sr increase gradually with raising the pH value. It is also observed that the adsorbability of Y is higher than that of Sr. While for Zr, after this drop, the adsorbability increases till pH 4.5 and then decreases with raising the pH to 5.5.

3.3.3. 0.1 mol/L Citrate Buffer

The adsorption behaviours of these elements in 0.1 mol/L citrate buffer over the pH range 3 to 5.5 on the PHA exchanger were studied (Figure 4). As shown from the given results, their adsorbabilities were low and almost constant over the range of pH 3–5.5 (for Y~25 and, for Zr and Sr~10) except at pH 5.5, zirconium gives no significant absorption (). However, the adsorption behaviours on cation-exchanger (Dowex 50WX8) as discussed by Kandil et al. [16] for these elements differ drastically from values for PHA where zirconium showed significant adsorbability that is constant with varying the pH from 3.5 to 5.5, while for strontium the -value decreased gradually with changing the pH from 3.5 to 5.5. The adsorbability of the trivalent element (Y) decreased sharply by increasing the pH from 3.5 to 4.5, and by continuing the increasing of pH to 5.5 the adsorbability of yttrium disappeared ().

3.4. PHA-Column Chromatography for the Separation of Zr from Y and Sr

From batch mode, the optimum conditions for separation of Zr from both Y and Sr were obtained which have been used in the column mode where the column chromatography is applicable for dealing with radioactive material. Practically, from all given results on PHA in batch mode, these elements presented a significant contrast that could facilitate separation of Zr from both Y and Sr. Additionally, in the column mode, the effective parameter is the flow rate related to the time. However, in the loading step, 100 ml has been loaded with flow rate 1.5 mL/min. During the loading, all yttrium and strontium were adsorbed on the resin while zirconium passed through the column. This means that separation of Zr from both Y and Sr has occurred (the main task of the work). In more details the elution profile for separation of Zr from both Y and Sr was given in Figure 5. As described above, for PHA exchanger a 100 mL stock solution containing 100 ppm of each Zr, Y, and Sr dissolved in 10−5 mol/L HCl was loaded onto a glass column, 22 cm long × 1.5 cm in diameter, packed with PHA with depth of 2 cm. At this molarity of HCl zirconium showed no specific adsorption (, Figure 2). So zirconium passed through the column with percentage 80% of initial amount. Further washing by this molarity of HCl showed no zirconium pass through the column while yttrium and strontium still remained on the column (their -values are rather high, Figure 2). For removal of strontium, 0.1 mol/L acetate buffer pH 3.5 is suitable for this purpose (Figure 3). Before elution of Sr, it is necessary to adjust the pH of the column by continuous flowing of 0.1 mol/L acetate buffer pH 3.5. All amount of strontium passed through the column while the residual of zirconium and all yttrium were still adsorbed on the column. Complete elution of Y was done using 2 mol/L HCl where all yttrium were collected in 100 mL. The elution of Y was accompanied by elution of residual zirconium. Therefore, further purification is needed.

3.5. Purification Step

The 100 mL of 2 mol/L HCl containing the whole yttrium and the residual zirconium was evaporated to incipient dryness, and the residue dissolved in 100 mL of double distilled water. The solution was loaded onto a glass column of the same dimensions packed with a new portion of PHA at flow rate 1.5 mL/min. The residual Zr passed through the column while yttrium remained on the column. Again all yttrium was eluted by 2 mol/L HCl.

Regarding the recent work [16], separation of radiozirconium (IV) from both Y(III) and Sr(II) has been carried out using the Dowex 50W-X8 (cation exchanger) column chromatography and Dowex 21K (anion exchanger) column chromatography. The separation efficiency for Zr from both elements together by Dowex 50W-X8 and Dowex 21K was 75% and 22%, respectively. It appears from our results that the zirconium was completely separated (~100%) from Sr(II) in one step and from Y in two steps using PHA column chromatography (Table 4). However, the process in this work was done by employing the inactive elements. The investigated method could be applied for the separation of radiozirconium from both parents (Y and Sr).

4. Conclusion

Poly(hydroxamic acid) resin (PHA) was prepared by modification of polyacrylamide (PAAm) and characterized by IR. From the presented study, the PHA-column chromatography was employed in separation of Zr(IV) from Y(III) and Sr(II), where the presented two-step route for purification of Zr from Y(III) was done while purification of Zr from Sr(III) was achieved in one step. The investigated method using PHA could be applied in purification of 89Zr from its parents (Y or Sr).