Journal of Atomic, Molecular, and Optical Physics
Volume 2012 (2012), Article ID 916510, 11 pages
Electronic-Rotational Coupling in Cl–para-H2 Van der Waals Dimers
Department of Chemistry, University of Tennessee, Knoxville, TN 37996-1600, USA
Received 31 July 2012; Accepted 12 November 2012
Academic Editor: Hari P. Saha
Copyright © 2012 Robert J. Hinde. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
We examine the interaction between an open-shell chlorine atom and a para-H2 molecule in the region of configuration space that corresponds to a weakly bound Cl–para-H2 van der Waals dimer. By constructing and diagonalizing the Hamiltonian matrix that represents the coupled Cl atom electronic and H2 rotational degrees of freedom, we obtain one-dimensional energy curves for the Cl–para-H2 system in this region of configuration space. We find that the dimer exhibits fairly strong electronic-rotational coupling when the Cl–H2 distance R is close to ; however, this coupling does not modify substantially the positions and depths of the van der Waals wells in the dimer’s curves. An approximation in which the para-H2 fragment is treated in the strict limit thus appears to yield an accurate representation of those states of the weakly bound Cl–para-H2 dimer that correlate with H2 in the limit.
Experimental studies  of the infrared absorption spectra of solid para-H2 matrices that contain chlorine atoms as substitutional impurities indicate that Cl-H2 interactions raise the transition energy associated with the spin-orbit (SO) transitions of the Cl impurities. In these systems, the H2 molecules in the Cl atom’s first “solvation shell” reside in the van der Waals region of the Cl-H2 potential energy surface . A detailed analysis of the matrix-induced blue shift of the SO transition for Cl atoms embedded in solid para-H2 would thus provide insight into the shape of the Cl-H2 potential energy surface in this region of configuration space. This in turn could help us better understand the dynamics of the Cl + H2 → HCl + H reaction, which has long been considered a benchmark system in chemical reaction dynamics . For example, theoretical studies  of the HCl/DCl product branching ratio of the Cl + HD reaction suggest that the van der Waals region of the potential energy surface plays a key role in controlling the reaction’s dynamics at low collision energies.
In the para-H2 matrix, the Cl atom’s SO transition is blue shifted by about 60 cm−1 by Cl-H2 interactions , which amounts to a shift of about 5 cm−1 for each of the twelve H2 molecules in the Cl atom’s first solvation shell. The matrix-induced blue shift of the Cl SO transition can be qualitatively understood as arising from subtle differences in the van der Waals interactions of the ground and excited SO states of the Cl atom with nearby H2 molecules. For a simulation to reproduce quantitatively the observed blue shift, we might therefore anticipate that the potential energy surfaces used in the simulation should be accurate to better than 1 cm−1. Theoretical studies of the matrix-induced shift would thus represent a fairly stringent test of the Cl-H2 potential energy surfaces involving both the ground and excited SO states of the Cl atom.
Previous simulations [5, 6] of open-shell atomic impurities in para-H2 matrices have employed a simplified model for the para-H2 matrix, a model in which the H2 molecules are treated as spherical particles. This is equivalent to assuming that the H2 molecules in the matrix remain in the pure ground rotational state, with their orientational degrees of freedom completely unperturbed by anisotropic interactions with the open-shell impurity. However, a careful study of the B-H2 and Al-H2 van der Waals dimers  indicated that the binding energies of these dimers increased by 15% to 20% (or several cm−1) when the restriction for the H2 monomer was relaxed and rotational states were allowed to mix into the H2 molecule’s rotational wave function. Similar behavior in the Cl-H2 dimer might raise concerns that the effective Cl-H2 potential energy functions obtained from a pure approximation for the H2 molecule would be insufficiently accurate for a quantitative study of the matrix-induced blue shift of the Cl SO transition. In such a case, more sophisticated treatments  of the H2 molecules’ rotational degrees of freedom might be needed.
In this work, we examine electronic-rotational coupling in the Cl-para-H2 van der Waals dimer, using the potential energy surfaces for the dimer presented in  as the foundation for our study. We find some evidence for moderately strong electronic-rotational coupling in the low-energy repulsive region of the Cl-H2 potential energy surface. This coupling does not, however, substantially change the positions or depths of the van der Waals minima for dimers composed of a Cl atom and a para-H2 molecule. This suggests that treating the H2 molecules in Cl-doped solid para-H2 as pure molecules should be a reasonably good approximation.
2. Spin-Orbit States of an Isolated Cl Atom
We begin our investigation by reviewing the effects of SO coupling in an isolated chlorine atom. We first construct a basis set of antisymmetrized many-electron functions for the atom’s subshell; we will use this basis set to evaluate the matrix elements of the atom’s effective SO operator. For future convenience, we choose these antisymmetrized many-electron functions to be Slater determinants of Cartesian spin-orbitals in a space-fixed coordinate system. We use and , respectively, to represent a one-electron Cartesian orbital paired with either the spin-up or spin-down electron spin function. For specificity, we note that the function is positive along the positive axis. The six many-electron functions that span the subspace of interest are these Slater determinants:
The Cl atom’s SO operator is written as where and are the total orbital and spin angular momentum operators for the five electrons in the subshell and the constant is two-thirds of the energy gap between the lower and upper SO energy levels of the Cl atom; this energy gap is . In a basis set consisting of these six Slater determinants, has the matrix representation where the basis set is ordered from left to right (and top to bottom). In the same basis set, the operator corresponding to the -axis projection of the total angular momentum of the subshell, has the matrix representation
Because and commute with one another, we can simultaneously diagonalize the and matrices. The normalized many-electron functions that do this are The four functions labeled with the subscript are degenerate, with energy . They represent the four components of the Cl atom’s lower SO energy level; the fraction listed in each function’s subscript, when multiplied by , gives that function’s eigenvalue. The two functions labeled with the subscript are degenerate components of the Cl atom’s upper SO energy level and have energy ; these functions have eigenvalues of , as indicated by their respective subscripts. Later, we will use the symbol to represent the subscripts attached to the six many-electron SO wave functions listed above; the eigenvalue for each function is thus .
Next we examine the charge densities associated with the Cl atom’s lower and upper SO energy levels. The charge density associated with one of the six electronic wave functions listed above is obtained by forming the product , integrating over the five electrons’ spin coordinates and the spatial coordinates of four of the five electrons, and multiplying by five. The final multiplication by five accounts for the fact that the many-electron function is normalized so that integrating over all five electrons’ spatial coordinates gives the value one, while integrating the charge density over all space should give the value five.
To emphasize the shapes of these charge densities, we note that the charge density associated with the Slater determinant , which corresponds to a singly occupied orbital aligned with the space-fixed Cartesian axis and doubly occupied orbitals aligned with the other two space-fixed Cartesian axes, can be pictured as a charge density “hole” superimposed on the isotropic charge density function associated with a filled six-electron subshell. We will represent this hole-plus-filled-subshell charge distribution using the symbol .
After computing the charge densities associated with the six SO wave functions listed above and writing them in terms of this symbol, we obtain This shows that the Cl atom’s upper SO energy level has an isotropic charge density distribution, while the charge densities associated with the lower SO energy level are anisotropic. The wave functions have higher levels of electron density along the space-fixed Cartesian -axis and lower levels of electron density in the plane; the situation is reversed for the wave functions.
3. Cl-H2 without Spin-Orbit Coupling
Now we consider a Cl-H2 dimer in which the Cl atom is located at the origin of the space-fixed coordinate system and the H2 center of mass is located on the positive space-fixed axis. We use and to represent the polar and azimuthal angles, respectively, of the H–H covalent bond in the space-fixed coordinate system. The H–H covalent bond length is denoted , and is the Cl-H2 distance. In this section, we neglect the effect of SO coupling in the Cl atom.
3.1. Characteristics of the Cl-H2 Potential Energy Surface
First we set the azimuthal angle to , so that the H2 molecule resides in the plane. If we neglect effects related to SO coupling, then there are three Cl-H2 adiabatic electronic states, each of which is doubly degenerate because of the spin-1/2 nature of the Cl-H2 dimer [2, 9, 11]. Two of these states have spatial symmetry with respect to the plane; these are states in which the -orbital “hole” of the Cl atom resides in the plane. The third state has spatial symmetry; in this state, the Cl atom’s -orbital hole is aligned with the -axis.
The two adiabatic electronic states, which we label and in order of increasing energy, can be viewed as linear combinations of diabatic states associated with the Slater determinants and . The mixing angle defines these linear combinations [2, 9, 11]: The mixing angle can be computed by applying an approximate diabatization procedure to the adiabatic electronic wave functions obtained from a conventional ab initio calculation [2, 9, 11, 12].
When the H2 polar angle is either or , then symmetry considerations make the electronic states corresponding to the and Slater determinants good adiabatic electronic states of the Cl-H2 system. For these geometries, the mixing angle must be either or . For , the state is lower in energy than the state, while for , the state is lower in energy than the state. In Figure 1, we show how the Cl-H2 interaction energy obtained in  for these two adiabatic states depends on the Cl-H2 distance , both for geometries with (in which the H–H bond is collinear with the Cl-H2 distance) and for geometries with (in which the H–H bond is perpendicular to the Cl-H2 distance). In these plots, the H–H covalent bond length is held fixed at , its vibrationally averaged value.
Note that for collinear approach of the H2 molecule, the adiabatic and states undergo a crossing near . At that point, the mixing angle changes discontinuously from at large to at small . We can explain this behavior using a simple picture of the Cl-H2 interaction based on electrostatic and overlap contributions. At large , it is more favorable for the “hole” in the Cl atom’s subshell to be oriented at right angles to the covalent bond of the incoming H2 molecule; this leads to the most favorable quadrupole-quadrupole interaction between the H2 molecule and the Cl atom. At small , however, repulsive overlap interactions become more important; these are minimized if the Cl atom’s hole orients itself along the axis that connects the Cl nucleus and the H2 center of mass.
Now we investigate how the Cl-H2 interaction changes as the H2 molecule rotates from to , with both and held fixed. As before, we neglect SO coupling and we set to its vibrationally averaged value of . Figure 2(a) shows, for the two adiabatic electronic states, how the Cl-H2 interaction energy depends on at . In Figure 2(b) we plot, as functions of , the contributions that the and diabatic states make to the adiabatic state; as we see from (20), these contributions are simply and . Figure 2(b) demonstrates that for the state, the hole in the Cl atom’s subshell rotates in space as changes so that the Cl atom maintains a favorable electrostatic interaction with the H2 quadrupole.
3.2. Electronic-Rotational Coupling in Cl-H2 Dimers
Now we lift the restriction that and investigate how the rotational energy levels of the H2 molecule are perturbed by its interaction with the Cl atom. We continue to neglect SO coupling in the Cl atom.
We construct a basis set for the coupled rotational and electronic degrees of freedom of the Cl-H2 dimer that is a direct product of functions describing the Cl atom’s electronic state and functions describing the H2 molecule’s rotation. For the electronic portion of the direct product basis, we use the six Slater determinants defined in (1) through (6); this will simplify the subsequent incorporation of SO coupling. For the rotational portion of the direct product basis, we use the spherical harmonics with even values of the H2 rotational quantum number .
In this work, we limit the possible values to and ; this leads to a basis set with 36 orthonormal direct product electronic-rotational basis functions. In the absence of SO coupling, however, the Hamiltonian matrix splits into two uncoupled blocks that are, respectively, associated with the spin-up and spin-down Slater determinants. The two blocks have a common set of eigenvalues.
We could exploit the cylindrical symmetry of the Cl-H2 system to further factorize the Hamiltonian matrix. This would involve rewriting the electronic portion of the basis set in terms of complex linear combinations of and that are eigenfunctions of the operator, with eigenvalues : Because of the system’s cylindrical symmetry, the quantum number , which, after multiplication by , is the -axis projection of the sum of the electronic orbital angular momentum and the H2 rotational angular momentum, is rigorously good in the absence of SO coupling. If we were to express the SO-free Hamiltonian matrix in terms of the complex basis functions of (22) and (23), the two blocks of the matrix would therefore factor into uncoupled subblocks corresponding to the allowed values of . Although we do not employ this approach here, we will use to classify the overall symmetry of the SO-free Cl-H2 wave functions. For the basis set employed here, ranges from to in steps of one. In analogy with the nomenclature for diatomic molecules, we will denote Cl-H2 wave functions with , 1, 2, or 3 as , or states, respectively.
For a fixed value of the Cl-H2 distance , the elements of the electronic-rotational Hamiltonian matrix can be written as where and represent space-fixed Cartesian directions, is the H2 rotational constant (here taken to have the value 59.06 cm−1), and describes the Cl-H2 interaction. The analogous matrix element in which the electronic portions of the basis functions are represented by and has the same value as the matrix element in (24). Matrix elements that involve a spin-up and a spin-down Slater determinant are zero in the absence of SO coupling.
Because the Slater determinants and are orthogonal unless , the kinetic energy portion of (24) can be evaluated quite easily; it is given by After writing out explicitly the integration over the H2 angles and , the potential energy portion of (24) becomes where Here, we compute the integrals in (26) by numerical quadrature, using the 240-point spherical -design specified in .
To evaluate , we introduce a rotated system of Cartesian axes, which we denote . The and axes rotate in the space-fixed plane as the H2 azimuthal angle changes, so that the H2 molecule always resides in the plane. The Slater determinants and , defined in the space-fixed coordinate system, are related to their analogues and , defined in the rotated coordinate system, through Equipped with this relationship, we can now evaluate , where and are directions in the space-fixed coordinate system, in terms of integrals over , and . Doing this, we obtain where, for the sake of brevity, we have suppressed the dependence of . Note that and are both zero by reasons of symmetry.
The quantities , and are the same as those in through of . They depend on and but are independent of . As a consequence, Cl-H2 electronic-rotational basis functions with different values of are coupled only by the trigonometric functions of that are shown explicitly in (30) through (34). and couple H2 rotational states with or 2, couples H2 rotational states with , and and couple H2 rotational states with . has no dependence on and therefore does not couple basis functions with different values.
Constructing and diagonalizing the electronic-rotational Hamiltonian matrix at a series of values gives the Cl-H2 curves shown in Figure 3, which we now discuss in some detail. The curves fall into three distinct groups, labeled as A, B, and C. The two curves in group A correlate smoothly with the rotational level of the H2 molecule as , while those in groups B and C correlate with states of the H2 molecule in this limit. All of the B curves, at large , correlate with electronic-rotational basis functions that involve the Cl atom’s Slater determinant. The C curves, on the other hand, correlate at large with electronic-rotational basis functions involving the and Slater determinants of the Cl atom.
We begin by considering the two curves (one and one ) in group A. Both curves are attractive at long range, but the minimum of the curve is deeper and occurs at a smaller value. The minimum for the curve occurs at , where meV. The minimum for the curve is at , where meV. The curve correlates at large with the Slater determinant of the Cl atom’s subshell; for this Slater determinant, the hole of the Cl atom is oriented along the space-fixed axis, which is the direction of approach of the incoming H2 molecule. The curve, by contrast, correlates at large values with the and Slater determinants, for which the Cl atom’s hole is oriented in the plane. The curve thus minimizes short-range repulsive overlap interactions between Cl and H2 and permits closer approach of the incoming H2 molecule.
Group B includes three curves: one , one , and one . These curves all correlate smoothly with the Slater determinant as , so the Cl atom’s hole is aligned with the space-fixed axis for large . For the curve, the H2 rotational state at large corresponds to the spherical harmonic. In this state, the H2 molecule can be viewed classically as rotating in the plane. This orientation of the rotating H2 molecule both maximizes its attractive electrostatic quadrupole-quadrupole interaction with the Cl atom and minimizes short-range Cl-H2 repulsive interactions at small values. Consequently, of the three group B curves, the curve has the deepest minimum.
The curve from group B correlates at large with electronic-rotational basis functions that are direct products of the H2 spherical harmonics and the Cl atom’s Slater determinant. As , therefore, the character of this curve is associated with the rotational motion of the H2 molecule. Figure 3 shows, however, that this curve undergoes an avoided crossing with the group A curve near .
To understand the nature of this avoided crossing in more detail, we project the wave function for the group A curve onto two pairs of electronic-rotational direct product basis functions: the two functions and and the two functions and . The first pair of functions describes the group A curve at large values, while the second pair of functions describes the group B curve at large values. Figure 4 shows the dependence of the contributions that these two pairs of basis functions make to the curve of group A.
It is clear that, for the entire range of values shown in Figure 4, the makeup of the group A curve is dominated by these two pairs of basis functions; summed together, their contributions represent over 99% of the curve’s character. At large values, the curve can be described entirely by the and direct product functions, demonstrating that the character of the state arises from the Cl atom’s subshell. At small values, however, the curve is described entirely by the and direct product functions; here, the character of the state arises from the rotational motion of the H2 molecule. The crossover in the description of the curve of group A reflects a strong interaction between these two zero-order states, an interaction that arises from the and functions of (33) and (34). The result is to strongly couple the electronic and rotational degrees of freedom of the Cl-H2 dimer near .
We have also taken the group A curve and projected it onto the direct product basis function to assess the contribution that this zero-order state makes to the curve. Figure 4 indicates that this zero-order state provides a very good description of the group A curve, accounting for more than 90% of its character over the entire range of values shown there. This demonstrates that the group A curve can be closely approximated by the interaction between a pure para-H2 molecule and a Cl atom described by the Slater determinant.
4. Cl-H2 Including Spin-Orbit Coupling
Now we ask how the results summarized in Figures 3 and 4 change when we include the effects of SO coupling. To do this, we simply add the appropriate matrix elements of the SO operator (see (8)) to the Hamiltonian matrix expressed in the direct product basis set, and then compute the eigenvalues of the new matrix at a series of values. The calculations of  indicate that, in the Cl-H2 van der Waals region, the triatomic system’s SO matrix elements are nearly independent of the Cl-H2 geometry and have values nearly identical to those for an isolated Cl atom. This justifies the approximation implicit in our calculations, namely that the matrix for the free Cl atom is a good approximation of the effects of SO coupling in the Cl-H2 dimer. For a given value of , and in the absence of accidental degeneracies, the new Hamiltonian matrix has 18 distinct doubly degenerate eigenvalues. Kramers  explained that a system with a single unpaired electron would always, in the absence of an external magnetic field, have doubly degenerate energy levels; the two states that make up a single doubly degenerate energy level are sometimes called a Kramers pair.
As before, the system’s cylindrical symmetry introduces a rigorously good quantum number that, when multiplied by , gives the -axis projection of the system’s total (electronic spin plus electronic orbital plus H2 rotational) angular momentum. Here we call this quantum number ; its value is given by , and for the basis set employed here, the possible values of range from to in steps of one. Although we have not exploited the system’s cylindrical symmetry to block-diagonalize the Hamiltonian matrix, we use to classify the symmetry of the Cl-H2 wave functions and to gain some physical insight into the shapes of the system’s energy curves .
In Table 1, we list the combinations of the and quantum numbers that can generate each of the four positive allowed values. The corresponding negative values can be obtained by reversing the sign of both and . In the following discussion, we consider only the states that have positive values, as the states with negative values have identical energies. We will refer to this table and to the charge densities of the two SO levels of an isolated Cl atom ((17) through (19)), as we discuss the role that SO coupling has on the Cl-H2 energy curves.
As Table 1 indicates, the state of the H2 molecule, which has as well, can either form a Cl-H2 state with by combining with the state of the Cl atom or form a Cl-H2 state with by combining with the state or the state of the Cl atom. Consequently, there are three distinct Cl-H2 curves that correlate as with the ground rotational state of the H2 molecule. Two of the three curves are associated with the Cl atom’s lower SO energy level, and one is associated with the atom’s upper SO energy level. These curves, shown in Figure 5, are the most important ones for understanding the interaction between Cl and an approaching para-H2 molecule.
All three curves exhibit relatively shallow van der Waals minima. The state that correlates with the Cl atom’s lower SO energy level has the deepest minimum, which occurs at . At this value, the depth of the Cl-H2 curve, measured with respect to the asymptote, is 10.0 meV. The other two states have shallower minima, which occur at larger values: the minimum for the state that correlates with the upper SO energy level is at , while that for the state is at . The depths of these minima, measured with respect to the asymptotes, are, respectively, 7.3 meV and 6.5 meV. The relative locations and depths of the three minima can be understood by examining the charge densities of the Cl electronic states that are associated with each curve.
For the curve that correlates with the lower SO energy level, the Cl atom is described at large by the electronic wave function. This Cl atomic state has a depletion of electron density along the axis (see (18)), which is the direction of approach of the incoming H2 molecule. Consequently, of the three curves shown in Figure 5, this curve allows the H2 molecule to approach the Cl atom most closely. For the curve, on the other hand, the Cl atom is described at large by the electronic wave function; as (17) shows, the electron density for this state of the Cl atom is depleted in the plane and built up along the axis. Of the three curves shown in Figure 5, this curve has its minimum at the largest value. Finally, for the curve that correlates with the upper SO energy level, the Cl atom’s large- character is that of the state. In this state, the atom’s “hole” is completely orientationally delocalized (see (19)). This leads to a minimum that occurs at an value between the minima for the two other curves.
We now ask, for the two curves depicted in Figure 5, how the approach of the incoming H2 molecule distorts the electronic structure of the Cl atom. To answer this question, we take the Cl-H2 wave functions for the two curves and project them onto either the (for the lower curve) or the (for the upper curve) Cl atomic wave function. In computing these projections, we sum over all of the H2 fragment’s rotational states. Figure 6(a) shows, as a function of the Cl-H2 distance , the fractional contributions that these two pure atomic SO states make to the corresponding Cl-H2 dimer wave functions. For large , the Cl electronic structure is essentially unperturbed by the H2 molecule. As decreases below about , however, the impinging H2 molecule begins to mix some excited SO character into the wave function of the lower curve, and some ground SO character into the wave function of the upper curve.
For these two curves, Cl-H2 interactions also perturb the rotational degrees of freedom of the H2 fragment at small values. This leads to a mixing of some character into the H2 molecule’s rotational wave function. To measure this perturbation, we project the two Cl-H2 wave functions onto the H2 molecular rotational wave function. In computing these projections, we sum over all of the Cl fragment’s SO states. Figure 6(b) shows how the contribution that the H2 state makes to the overall dimer wave function changes with . For the range of values shown here, the character of both curves is dominated by the H2 rotational state.
Figures 7 through 9 complete our survey of the Cl-H2 energy curves associated with the lower SO energy level. In these figures, the curves whose large- asymptotic values are roughly 7 meV all correlate, as , with the H2 molecule’s rotational energy level. For the , 5/2, and 7/2 states (Figures 7 and 9), these curves fall into two groups distinguished mainly by the position of their short-range repulsive walls. The curves whose repulsive walls occur at smaller values are associated with the Cl atom’s states, which have a depletion of electron density along the axis. The curves whose repulsive walls occur at larger values are associated with the Cl atom’s states, which do not exhibit depleted electron density along the axis.
The curves depicted in Figure 8 exhibit more complicated behavior. The uppermost curve shown there is associated with the Cl atom’s state, and thus its repulsive wall begins to manifest itself at larger values. The other three curves, however, participate in a pair of avoided crossings near , close to where the avoided crossing observed in Figure 3 occurred. The unusual “kink” seen in Figure 5 is associated with this pair of avoided crossings.
Figure 10 shows this pair of avoided crossings at higher magnification. The three curves, in order of increasing energy, correlate in the large limit with the Cl atomic state coupled with the rotational state of H2; the Cl atomic state coupled with the rotational state of H2; and the Cl atomic state coupled with the rotational state of H2. The pair of avoided crossings shown in Figure 10 is analogous to the avoided crossing between the group A and group B curves shown in Figure 3. The additional complexity observed in Figure 10 arises from the fact that, as Table 1 shows, three different values of the H2 molecule’s quantum number can combine with an appropriate SO level of the Cl atom to form a dimer state with . Although the avoided crossings shown in Figure 10, like that shown in Figure 3, demonstrate that there are regions of configuration space where the Cl-H2 dimer exhibits strong electronic-rotational coupling, these regions of configuration space are at moderately high energies on the repulsive wall of the dimer’s potential energy surface.
Finally, in Figure 11, we show all of the curves that correlate at large with the Cl atom’s upper SO level. Only one of these curves, with , correlates with the state of the H2 molecule; the others correlate with the H2 molecule’s excited rotational state. All six curves shown in this figure have very similar shapes; this is because the upper SO level of the Cl atom, with its orientationally delocalized hole, appears isotropic to the incoming H2 molecule.
We close by computing the Cl-H2 interaction curves , including the effects of SO coupling, under the assumption that the H2 molecule retains pure character at all values of . We do this simply by removing all of the direct product basis functions with from the basis set used to express the Cl-H2 dimer wave function; this leads to a matrix representation of the Cl-H2 Hamiltonian that has three doubly degenerate eigenvalues, or three Kramers pairs. These three eigenvalues represent the interaction curves obtained using the pure approximation for the H2 fragment. In Figure 12, we show these three curves and compare them with the analogous curves computed using the larger Hamiltonian matrix that includes states of the H2 fragment. The three curves obtained from the larger Hamiltonian matrix were first shown in Figure 5.
We see from Figure 12 that the depths and positions of the van der Waals minima for these three curves change very little when we impose the pure approximation for the H fragment. For example, the depth of the curve that correlates with the Cl atom’s lower SO state (shown in Figure 12(a)) changes by about 0.5% when we impose this approximation. This is in sharp contrast to the case for the B-H2 and Al-H2 dimers , for which the zero-point-corrected binding energies change by 15% and 22%, respectively, when the H2 fragment is frozen in its state. It appears that the anisotropy of the underlying diabatic potential energy surfaces is substantially larger for the B-H2 and Al-H2 systems than for the Cl-H2 system; this leads to a greater perturbation of the H2 molecule’s rotational wave function in the region of the van der Waals minima of the B-H2 and Al-H2 systems.
For the two curves shown in Figure 12, we see that the pure approximation reproduces the actual Cl-H2 interaction curves very well; the main difference seems to be that the curve that correlates with the lower SO level of the Cl atom has a slightly stiffer repulsive wall if the H2 molecule is held fixed in its rotational state. For the curve that correlates with the lower SO level of the Cl atom, the pure approximation is of course completely incapable of reproducing the true Cl-H2 interaction for values below ; this is the region of configuration space where strong electronic-rotational coupling leads to the avoided crossings shown in Figure 10, and the approximation is simply inapplicable there. However, this region of configuration space is relatively high on the repulsive wall of the curve; because the experimental studies of Cl-doped solid para-H2 are carried out at K, it is unlikely that the Cl atom’s H2 neighbors spend a significant portion of time exploring this portion of the potential energy curve.
We have computed a series of one-dimensional energy curves for the Cl-para-H2 dimer by diagonalizing the dimer’s combined electronic-rotational Hamiltonian matrix. We express the Hamiltonian matrix in terms of a direct product basis set that facilitates the inclusion of SO coupling effects. The gross features of the dimer’s curves, such as the depths and positions of the curves’ van der Waals minima, can be rationalized by considering the charge densities associated with the lower and upper SO levels of the Cl atom.
We find that electronic-rotational coupling in the Cl-H2 dimer is strong for Cl-H2 distances near . In the system where SO effects are ignored, this coupling gives rise to an avoided crossing between two Cl-H2 states with symmetry: one that correlates at large with the H2 rotational level and one that correlates with the rotational level. Once SO effects are included, this avoided crossing becomes a pair of avoided crossings associated with three of the Cl-H2 dimer’s states: one of which correlates at large with the H2 rotational level and two of which correlate with the rotational level.
By removing H2 rotational states from the direct product basis set used to express the Cl-H2 Hamiltonian, we can assess how the assumption that the para-H2 fragment retains its pure identity might affect the shape of the Cl-para-H2 energy curves. We find that the positions and depths of the system’s van der Waals minima are virtually unaffected when the H2 fragment is restricted to its pure rotational state. This suggests that the H2 molecules in Cl-doped solid para-H2 can probably be treated as pure objects without a significant loss of accuracy.
R. J. Hinde thanks D. T. Anderson and K. R. Brown for helpful discussions. This work was supported by the US National Science Foundation through Grant CHE-0848841.
- P. L. Raston and D. T. Anderson, “The spin-orbit transition of atomic chlorine in solid H2, HD, and D2,” Journal of Chemical Physics, vol. 126, no. 2, Article ID 021106, 4 pages, 2007.
- J. Klos, M. M. Szczesniak, and G. Chalasinski, “Paradigm pre-reactive van der Waals complexes: X–HX and X–H2 (X = F, Cl, Br),” International Reviews in Physical Chemistry, vol. 23, no. 4, pp. 541–571, 2004.
- X. Wang, W. Dong, C. Xiao et al., “The extent of non-Born-Oppenheimer coupling in the reaction of Cl(2P) with para-H2,” Science, vol. 322, no. 5901, pp. 573–576, 2008.
- D. Skouteris, D. E. Manolopoulos, W. Bian, H. J. Werner, L. H. Lai, and K. Liu, “Van der Waals interactions in the Cl + HD reaction,” Science, vol. 286, no. 5445, pp. 1713–1716, 1999.
- J. R. Krumrine, S. Jang, M. H. Alexander, and G. A. Voth, “Quantum molecular dynamics and spectral simulation of a boron impurity in solid para-hydrogen,” Journal of Chemical Physics, vol. 113, no. 20, pp. 9079–9089, 2000.
- Q. Wang, M. H. Alexander, and J. R. Krumrine, “An ab initio based model for the simulation of multiple 2P atoms embedded in a cluster of spherical ligands, with application to Al in solid para-hydrogen,” Journal of Chemical Physics, vol. 117, no. 11, pp. 5311–5318, 2002.
- J. Williams and M. H. Alexander, “Potential energy surfaces for and energetics of the weakly-bound Al–H2 and B–H2 complexes,” Journal of Chemical Physics, vol. 112, no. 13, pp. 5722–5730, 2000.
- T. Zeng, H. Li, R. J. Le Roy, and P. N. Roy, “‘Adiabatic hindered rotor’ treatment of the para-hydrogen-water complex,” Journal of Chemical Physics, vol. 135, no. 9, Article ID 094304, 15 pages, 2011.
- G. Capecchi and H. J. Werner, “Ab initio calculations of coupled potential energy surfaces for the Cl(2,2) + H2 reaction,” Physical Chemistry Chemical Physics, vol. 6, no. 21, pp. 4975–4983, 2004.
- M. Dagenais, J. W. C. Johns, and A. R. W. McKellar, “Precision measurement measurement of the ground state (2 − 2) splitting of atomic chlorine by CO2 laser Zeeman spectroscopy,” Canadian Journal of Physics, vol. 54, no. 14, pp. 1438–1441, 1976.
- J. Kłos, G. Chałasiński, and M. M. Szczȩśniak, “Modeling of adiabatic and diabatic potential energy surfaces of Cl(2P)⋯H2(1) prereactive complex from ab initio calculations,” Journal of Chemical Physics, vol. 117, no. 10, pp. 4709–4719, 2002.
- Y. Kurosaki and T. Takayanagi, “Global ab initio potential energy surfaces for the lowest three doublet states (12, 22, and 12) of the BrH2 system,” Journal of Chemical Physics, vol. 119, no. 15, pp. 7838–7856, 2003.
- R. H. Hardin and N. J. A. Sloane, “McLaren's improved snub cube and other new spherical designs in three dimensions,” Discrete and Computational Geometry, vol. 15, no. 4, pp. 429–441, 1996.
- H. A. Kramers, “Théorie générale de la rotation paramagnétique dans les cristaux,” Proceedings of the Royal Academy of Sciences, vol. 33, no. 9, pp. 959–972, 1930.