|
Hard |
|
EA-1 Optimize Energy Performance | MR-1.1 Building Reuse—maintain 75% of existing structure | SS-PR1 Construction Activity and Pollution Prevention |
EA-2 On-site renewable Energy | MR-1.2 Building Reuse—maintain 95% of existing structure | WE-1.1 Water Efficient Landscaping—reduce by 50% |
EA-PR1 Commissioning of Building Energy Systems | MR-1.3 Building Reuse—maintain 50% of interior non-structural | WE-1.2 Water Efficient Landscaping—no potable water use or no irrigation |
EA-PR2 Minimum Energy Performance | SS-6.1 Storm Water Design—Quantity Control | WE-2 Innovative Wastewater Technologies |
EQ-6.1 Controllability of Systems—lighting | SS-6.2 Storm Water Design—Quality Control | WE-3.1 Water Use Reduction—20% Reduction |
EQ-8.1 Daylight and Views—daylight 75% of spaces | SS-8 Light Pollution Effect | WE-3.2 Water Use Reduction—30% Reduction |
|
Soft |
|
EA-5 Measurement and Verification | MR-4.1 Recycled Content—10% | SS-4.1 Alt. Trans.—Public Transportation Access |
EA-6 Green Power | MR-4.2 Recycled Content—20% | SS-4.2 Alt. Trans.—Bicycle Storage and Changing Rooms |
EA-PR3 Fundamental Refrigerant Management | MR-5.1 Regional Materials—10% | SS-4.3 Alt. Trans.—Low Emitting and Fuel Efficient Vehicles |
MR-2.1 Construction Waste Management—divert 50% | MR-5.2 Regional Materials—20% | SS-4.4 Alt. Trans.—Parking Capacity |
MR-2.2 Construction Waste Management—divert 75% | MR-6 Rapidly Renewable Materials | SS-7.1 Heat Island Effect—Non-roof |
MR-3.1 Materials Reuse—5% | MR-7 Certified Wood | SS-7.2 Heat Island Effect—Roof |
MR-3.2 Materials Reuse—10% | MR-PR1 Storage and Collection of Recyclables | |
|
Non-Cost |
|
EA-3 Enhanced Commissioning | EQ-4.3 Low-Emitting Materials—Carpet Systems | EQ-PR2 Environmental Tobacco Smoke Control |
EA-4 Enhanced Refrigerant Management | EQ-4.4 Low-Emitting Materials—Composite Wood and Agrifiber Products | SS-1 Site Selection |
EQ-1 Outdoor Air Delivery Monitoring | EQ-5 Indoor Chemical and Pollutant Source Control | SS-2 Development Density and Community Connectivity |
EQ-2 Increased Ventilation | EQ-6.2 Controllability of Systems—Thermal Comfort | SS-3 Brownfield Redevelopment |
EQ-3.1 Construction IAQ Plan—during construction | EQ-7.1 Thermal Comfort—Design | SS-5.1 Site Development—Protect or Restore Habitat |
EQ-3.2 Construction IAQ Plan—before occupancy | EQ-7.2 Thermal Comfort—Verification | SS-5.2 Site Development—Maximize Open Space |
EQ-4.1 Low-Emitting—Adhesives and Sealants | EQ-8.2 Daylight and Views—views for 90% of spaces | ID-1 Innovation in Design |
EQ-4.2 Low-Emitting—Paints and Coatings | EQ-PR1 Minimum IAQ Performance | ID-2 LEED Accredited Professional |
|