Table of Contents
Advances in Artificial Neural Systems
Volume 2014, Article ID 347062, 10 pages
http://dx.doi.org/10.1155/2014/347062
Research Article

Virtual Sensor for Calibration of Thermal Models of Machine Tools

1Institute of Applied Computer Science, Dresden University of Technology, 01062 Dresden, Germany
2Institute of Machine Tools and Control Engineering, Dresden University of Technology, 01062 Dresden, Germany

Received 22 July 2014; Revised 20 October 2014; Accepted 4 November 2014; Published 27 November 2014

Academic Editor: Wilson Wang

Copyright © 2014 Alexander Dementjev et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. W. Li, W. J. Zhang, G. S. Yang, S. D. Tu, and X. B. Chen, “Thermal-error modeling for complex physical systems: the-state-of-arts review,” The International Journal of Advanced Manufacturing Technology, vol. 42, no. 1-2, pp. 168–179, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Chaskalovic, Finite Elements Methods for Engineering Sciences, Springer, Berlin, Germany, 2008.
  3. Y. Karpat and T. Özel, “Predictive analytical and thermal modeling of orthogonal cutting process—part I: predictions of tool forces, stresses, and temperature distributions,” Journal of Manufacturing Science and Engineering, vol. 128, no. 2, pp. 435–444, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Abdulshahed, A. P. Longstaff, S. Fletcher, and A. Myers, “Comparative study of ANN and ANFIS prediction models for thermal error compensation on CNC machine tools,” in Proceedings of 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance (LAMDAMAP '13), EUSPEN, 2013.
  5. R. Habtom, Dynamic System and Virtual Sensor Modeling Using Neural Networks, vol. 771 of Reihe 8: Meß, Steuerungs und Regelungstechnik, Fortschritt-Berichte VDI, University of Kaiserslautern, 1999.
  6. L. Fortuna, S. Graziani, and A. Rizzo, Soft Sensors for Monitoring and Control of Industrial Processes, Advances in Industrial Control, Springer, Secaucus, NJ, USA, 2006.
  7. P. Kadlec, B. Gabrys, and S. Strandt, “Data-driven soft sensors in the process industry,” Computers and Chemical Engineering, vol. 33, no. 4, pp. 795–814, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. W.-L. Wang and M. Ren, “Soft-sensing method for wastewater treatment based on BP neural network,” in Proceedings of the 4th World Congress on Intelligent Control and Automation, vol. 3, pp. 2330–2332, June 2002. View at Scopus
  9. S. Bhartiya and J. R. Whiteley, “Development of inferential measurements using neural networks,” ISA Transactions, vol. 40, no. 4, pp. 307–323, 2001. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Gustafsson, M. Drevö, U. Forssell, M. Löfgren, N. Persson, and H. Quicklund, “Virtual sensors of tire pressure and road friction,” in Proceedings of the Society of Automotive Engineers World Congress, SAE 2001-01-0796, Detroit, Mich, USA, March 2001.
  11. D. Alberer, D. L. Re, S. Winkler, and P. Langthaler, “Virtual sensor design of particulate and nitric oxide emissions in a diesel engine,” in Proceedings of the 7th International Conference on Engines for Automobile (ICE '05), pp. 1–10, Capri, Napoli, 2005.
  12. T. L. Ting, “Development of a neural network based virtual sensor for automatic transmission slip,” in Proceedings of the IEEE International Symposium on Intelligent Control, pp. 721–727, Vancouver, BC, Canada, October 2002. View at Scopus
  13. S. K. Lahiri and N. M. Khalfe, “Soft sensor development and optimization of the commercial petrochemical plant integrating support vector regression and genetic algorithm,” Chemical Industry and Chemical Engineering Quarterly, vol. 15, no. 3, pp. 175–187, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. P. Buschka and A. Saffiotti, “A virtual sensor for room detection,” in Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, vol. 1, pp. 637–642, October 2002. View at Scopus
  15. F. Felgner, Design of Virtual Airflow Sensors for Thermal Comfort Control, Shaker Verlag GmbH, Aachen, Germany, 2008.
  16. J. Park, M. Moon, S. Hwang, and K. Yeom, “CASS: a context-aware simulation system for smart home,” in Proceedings of the 5th ACIS International Conference on Software Engineering Research, Management, and Applications (SERA '07), pp. 461–467, August 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Morlier and G. Michon, “Virtual vibration measurement using KLT motion tracking algorithm,” Journal of Dynamic Systems, Measurement and Control, vol. 132, no. 1, pp. 11003–11011, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. “Active vibration suppression—ACOPOS makes the difference,” in Innovations 2014, pp. 64–67, B&R Automation, 2014.
  19. H. Tieng, H.-C. Yang, M.-H. Hung, and F.-T. Cheng, “A novel virtual metrology scheme for predicting machining precision of machine tools,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '13), pp. 264–269, Karlsruhe, Germany, May 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. R. Dittmar and B.-M. Pfeiffer, Modellbasierte Prädiktive Regelung: Eine Einführung für Ingenieure, Oldenbourg Wissenschaftsverlag, München, Germany, 2004.
  21. H. Dibowski, J. Ploennigs, and K. Kabitzsch, “Automated design of building automation systems,” IEEE Transactions on Industrial Electronics, vol. 57, no. 11, pp. 3606–3613, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Dibowski and K. Kabitzsch, “Ontology-based device descriptions and device repository for building automation devices,” EURASIP Journal on Embedded Systems, vol. 2011, Article ID 623461, 17 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. A. C. Özlük, Design space exploration for building automation systems [Ph.D. thesis], Dresden University of Technology, 2013.