Table of Contents
Advances in Electrical Engineering
Volume 2014, Article ID 727295, 9 pages
http://dx.doi.org/10.1155/2014/727295
Research Article

Modelling and Simulation of Static Excitation System in Synchronous Machine Operation and Investigation of Shaft Voltage

1Central Power Research Institute, Bhopal 462023, India
2Maulana Azad National Intitute of Technology, Bhopal 462051, India

Received 3 April 2014; Accepted 9 June 2014; Published 3 July 2014

Academic Editor: Ergina Kavallieratou

Copyright © 2014 Arun Kumar Datta et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. J. Lane, D. F. Rogers, and P. A. Vance, “Design and tests of a static excitation system for industrial and utility steam turbine-generators,” AIEE, vol. 80, no. 3, pp. 1077–1085, 1962. View at Publisher · View at Google Scholar
  2. R. C. Schaefer, “Applying static excitation systems,” IEEE Industry Applications Magazine, vol. 4, no. 6, pp. 41–49, 1998. View at Publisher · View at Google Scholar · View at Scopus
  3. Y.-Z. Zhang, “Study of process of starting pumped storage machines by static frequency converter with field current controlled,” in Proceedings of the 2nd International Conference on Signal Processing Systems (ICSPS '10), pp. V1224–V1227, July 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. R. B. Fisher, “Introduction of static frequency converters on SEPTA's 25-Hz commuter rail system,” in 1990 ASME/IEEE Joint Railroad Conference, pp. 149–155, April 1990. View at Scopus
  5. S.-H. Park, S.-H. Hwang, J.-M. Kim, H.-S. Ryu, and J.-H. Lee, “A starting-up control algorithm of large synchronous generation motor for gas turbosets,” in Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE '08), pp. 502–508, Cambridge, UK, June 2008. View at Publisher · View at Google Scholar
  6. H. Taguchi, S. Tamai, Y. Hosokawa, and A. Ando, “APS control method for gas turbine startup by SFC,” in Proceedings of the International Power Electronics Conference, pp. 264–269, IEEE, 2010.
  7. A. K. Datta, M. Dubey, N. R. Mondal, and B. V. Raghavaiah, “Motor-less operation of short circuit generator—a CPRI perspective,” in Proceedings of the International Conference on Electrical Power and Energy Systems (ICEPES '10), pp. 439–445, MANIT, Bhopal, India, August 2010.
  8. A. K. Datta, M. A. Ansari, N. R. Mondal, and B. V. Raghavaiah, “A novel use of power electronics: prime mover-less alternator with static drive & excitation system,” International Journal of Electronics & Communication Technology, vol. 3, no. 1, pp. 472–475, 2012. View at Google Scholar
  9. A. K. Datta, M. Dubey, and S. Jain, “Study of shaft voltage & bearing currents in electrical machines,” in Proceedings of the IEEE Students' Conference on Electrical, Electronics and Computer Science (SCEECS '12), pp. 1–4, Bhopal, India, March 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. J. M. Erdman, R. J. Kerkman, D. W. Schlegel, and G. L. Skibinski, “Effect of PWM inverters on AC motor bearing currents and shaft voltages,” IEEE Transactions on Industry Applications, vol. 32, no. 2, pp. 250–259, 1996. View at Publisher · View at Google Scholar · View at Scopus
  11. C. Ammann, K. Reichert, R. Joho, and Z. Posedel, “Shaft voltages in generators with static excitation systems—problems and solution,” IEEE Transactions on Energy Conversion, vol. 3, no. 2, pp. 409–419, 1988. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Chen and T. A. Lipo, “Circulating type motor bearing current in inverter drives,” IEEE Industry Applications Magazine, vol. 4, no. 1, pp. 32–38, 1998. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Muetze and A. Binder, “Calculation of circulating bearing currents in machines of inverter-based drive systems,” IEEE Transactions on Industrial Electronics, vol. 54, no. 2, pp. 932–938, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Muetze, “On a new type of inverter-induced bearing current in large drives with one journal bearing,” IEEE Transactions on Industry Applications, vol. 46, no. 1, pp. 240–248, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. H.-S. Ryu, B. Kim, J. Lee, and I. Lim, “A study of synchronous motor drive using static frequency converter,” in Proceedings of the 12th International Power Electronics and Motion Control Conference (EPE-PEMC '06), pp. 1496–1499, IEEE, September 2006. View at Scopus
  16. N. Zhu, D. Xu, B. Wu, N. R. Zargari, M. Kazerani, and F. Liu, “Common-mode voltage reduction methods for current-source converters in medium-voltage drives,” IEEE Transactions on Power Electronics, vol. 28, no. 2, pp. 995–1006, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. R. S. Kanchan, P. N. Tekwani, and K. Gopakumar, “Three-level inverter scheme with common mode voltage elimination and dc link capacitor voltage balancing for an open-end winding induction motor drive,” IEEE Transactions on Power Electronics, vol. 21, no. 6, pp. 1676–1683, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. M. R. Baiju, K. K. Mohapatra, R. S. Kanchan, and K. Gopakumar, “A dual two-level inverter scheme with common mode voltage elimination for an induction motor drive,” IEEE Transactions on Power Electronics, vol. 19, no. 3, pp. 794–805, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. K. K. Yuen, H. S. Chung, and V. S. Cheung, “An active low-loss motor terminal filter for overvoltage suppression and common-mode current reduction,” IEEE Transactions on Power Electronics, vol. 27, no. 7, pp. 3158–3172, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. Z. Zhao, Y. Zhong, H. Gao, L. Yuan, and T. Lu, “Hybrid selective harmonic elimination PWM for common-mode voltage reduction in three-level neutral-point-clamped inverters for variable speed induction drives,” IEEE Transactions on Power Electronics, vol. 27, no. 3, pp. 1152–1158, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Akagi and K. Isozaki, “A hybrid active filter for a three-phase 12-pulse diode rectifier used as the front end of a medium-voltage motor drive,” IEEE Transactions on Power Electronics, vol. 27, no. 1, pp. 69–77, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. F. Wang, “Motor shaft voltages and bearing currents and their reduction in multilevel medium-voltage PWM voltage-source-inverter drive applications,” IEEE Transactions on Industry Applications, vol. 36, no. 5, pp. 1336–1341, 2000. View at Publisher · View at Google Scholar · View at Scopus
  23. H. Akagi and T. Doumoto, “An approach to eliminating high-frequency shaft voltage and ground leakage current from an inverter-driven motor,” IEEE Transactions on Industry Applications, vol. 40, no. 4, pp. 1162–1169, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. A. K. Datta, M. Dubey, and S. Jain, “Effect of static power supply in alternator used for short-circuit testing-observation of shaft voltage,” IEEE Transactions on Power Electronics, 2014. View at Publisher · View at Google Scholar
  25. A. K. Datta, M. Dubey, and S. Jain, “Investigation of bearing currents in dual mode operation of synchronous machine with static excitation system,” Electrical and Electronics Engineering, vol. 2, no. 4, pp. 45–53, 2013. View at Google Scholar
  26. A. K. Datta, M. Dubey, and S. Jain, “Study of shaft voltage on short circuit alternator with static frequency converter,” International Journal of Electrical, Electronic Science and Engineering, vol. 7, no. 11, pp. 692–698, 2013. View at Google Scholar
  27. T.-J. Liang, J.-F. Chen, C.-L. Chu, and K.-J. Chen, “Analysis of 12 pulse phase control AC/DC converter,” in Proceedings of the 3rd IEEE International Conference on Power Electronics and Drive Systems (PEDS '99), pp. 779–783, Hong Kong, July 1999. View at Scopus
  28. A. K. Datta, G. Venkateswarlu, M. A. Ansari, and N. R. Mondal, “Excitation control during short circuit test sequence of 1500 MVA short circuit generator,” in Proceedings of the International Conference on Advances in Computer, Electronics & Electrical Engineering (ICACEEE '12), pp. 207–211, Mumbai, India, March 2012.
  29. The MathWorksTM , Inc., USA, Release 2008a (R2008a).
  30. S. Bell, T. J. Cookson, S. A. Cope et al., “Experience with variable-frequency drives and motor bearing reliability,” IEEE Transactions on Industry Applications, vol. 37, no. 5, pp. 1438–1446, 2001. View at Publisher · View at Google Scholar · View at Scopus