Table of Contents Author Guidelines Submit a Manuscript
Advances in Optical Technologies
Volume 2012 (2012), Article ID 234321, 8 pages
http://dx.doi.org/10.1155/2012/234321
Research Article

Cutting Properties of Austenitic Stainless Steel by Using Laser Cutting Process without Assist Gas

Graduate School of Engineering, Mie University, 1577 Kurima-machiya, Tsu, Mie 514-8507, Japan

Received 27 April 2012; Revised 24 July 2012; Accepted 7 August 2012

Academic Editor: Augusto Belendez

Copyright © 2012 Hitoshi Ozaki et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Hitoshi Ozaki, Yosuke Koike, Hiroshi Kawakami, and Jippei Suzuki, “Cutting Properties of Austenitic Stainless Steel by Using Laser Cutting Process without Assist Gas,” Advances in Optical Technologies, vol. 2012, Article ID 234321, 8 pages, 2012. doi:10.1155/2012/234321