Research Article
GaP Homojunction LEDs Fabricated by Dressed-Photon-Phonon-Assisted Annealing
Figure 7
Spectrum of device annealed for 4 hours while applying current density of 9.9 A/cm2 but no laser irradiation. (a) Blue curve shows initial spectrum, and red curve shows spectrum after DPP-assisted annealing for 4 hours. (b) Measured values of . For comparison with case where annealing was performed without laser irradiation (black curve), the case where annealing was performed with laser irradiation is also shown (Figure 6(c), red curve).
(a) |
(b) |