Table of Contents
Advances in Power Electronics
Volume 2012, Article ID 635715, 6 pages
http://dx.doi.org/10.1155/2012/635715
Research Article

Improved Expression for Estimation of Leakage Inductance in E Core Transformer Using Energy Method

1Pulse High Power Microwave Section, Raja Ramanna Centre for Advanced Technology, Indore 452013, India
2Power Supplies and Industrial Accelerator Division, Raja Ramanna Centre for Advanced Technology, Indore 452013, India

Received 31 December 2011; Revised 13 April 2012; Accepted 29 April 2012

Academic Editor: Pavol Bauer

Copyright © 2012 Sivananda Reddy Thondapu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. D. Johnson, A. F. Witulski, and R. W. Erickson, “Comparison of resonant topologies in high-voltage dc applications,” IEEE Transactions on Aerospace and Electronic Systems, vol. 24, no. 3, pp. 263–274, 1988. View at Publisher · View at Google Scholar · View at Scopus
  2. A. K. S. Bhat, A. Biswas, and B. S. R. Iyengar, “Analysis and design of (LC)(LC)-type series-parallel resonant converter,” IEEE Transactions on Aerospace and Electronic Systems, vol. 31, no. 3, pp. 1186–1193, 1995. View at Publisher · View at Google Scholar · View at Scopus
  3. B. Yang, F. C. Lee, A. J. Zhang, and G. Huang, “LLC resonant converter for front end DC/DC conversion,” in Proceedings of the 17th Annual IEEE on Applied Power Electronics Conference and Exposition Conference (APEC '02), vol. 2, pp. 1108–1112, Institute of Electrical and Electronics Engineers, 2002.
  4. J. A. Sabate, V. Vlatkovic, R. B. Ridley, F. C. Lee, and B. H. Cho, “Design considerations for high-voltage high-power full-bridge zero-voltage-switched pwm converter,” in Proceedings of the 5th Annual Applied Power Electronics Conference and Exposition (APEC '90), pp. 275–284, Institute of Electrical and Electronics Engineers, 1990.
  5. J. F. Lazar and R. Martinelli, “Steady-state analysis of the LLC series resonant converter,” in Proceedings of the 16th Annual Applied Power Electronics Conference and Exposition (APEC '01), vol. 2, pp. 728–735, Institute of Electrical and Electronics Engineers, 2001.
  6. P. C. Todd, “Snubber circuits: theory, design and application,” in Unitrode-Power Supply Design Seminar, 1993. View at Google Scholar
  7. William McMurray, “Selection of snubbers and clamps to optimize the design of transistor switching converters,” IEEE Transactions on Industry Applications, vol. IA-16, no. 4, pp. 513–523, 1980. View at Google Scholar
  8. N. Mohan, T. M. Undeland, and W. P. Robbins, Power Electronics: Converters, Applications, and Design, vol. 1, John Wiley & Sons, New York, NY, USA, 2003.
  9. R. Doebbelin, M. Benecke, and A. Lindemann, “Calculation of leakage inductance of core-type transformers for power electronic circuits,” in Proceedings of the 13th Power Electronics and Motion Control Conference (EPE-PEMC '08), pp. 1280–1286, September 2008.
  10. A. A. Dauhajre, Modelling and estimation of leakage phenomena in magnetic circuits, Ph.D. thesis, California Institute of Technology, Pasadena, Calif, USA, 1986.
  11. W. T. McLyman and C. W. T. McLyman, Transformer and Inductor Design Handbook, Marcel Dekker, New York, NY, USA, 2004.
  12. Z. Ouyang, O. C. Thomsen, and M. Andersen, “The analysis and comparison of leakage inductance in different winding arrangements for planar transformer,” in Proceedings of the International Conference on Power Electronics and Drive Systems (PEDS '09), pp. 1143–1148, November 2009.
  13. R. Doebbelin, R. Herms, C. Teichert, W. Schaetzing, and A. Lindemann, “Analysis methods and design of transformers with low leakage inductance for pulsed power applications,” in Proceedings of the European Conference on Power Electronics and Applications, pp. 1–7, September 2007.
  14. W. G. Hurley and D. J. Wilcox, “Calculation of leakage inductance in transformer windings,” IEEE Transactions on Power Electronics, vol. 9, no. 1, pp. 121–126, 1994. View at Google Scholar