Research Article
Hybrid Integration of Taguchi Parametric Design, Grey Relational Analysis, and Principal Component Analysis Optimization for Plastic Gear Production
Table 14
Results of the verification test.
| Verification test | Tooth thickness (mm) | Addendum circle (mm) | Dedendum circle (mm) |
| 1 | −0.0187 | −0.0194 | −0.0160 | 2 | −0.0391 | −0.0186 | −0.0148 | 3 | −0.0245 | −0.0165 | −0.0159 | 4 | −0.0164 | −0.0194 | −0.0150 | 5 | −0.0221 | −0.0162 | −0.0148 |
| Average | −0.0180 | −0.0153 | −0.0242 |
|
|