Table of Contents
Conference Papers in Science
Volume 2015, Article ID 387830, 7 pages
http://dx.doi.org/10.1155/2015/387830
Conference Paper

Experimental Analysis of Microstructured Steel Surfaces for Wet Tribological Applications in the Low Velocity Regime

1wbk Institute of Production Science, Karlsruhe Institute of Technology (KIT), Kaiserstrasse 12, 76131 Karlsruhe, Germany
2Institute for Applied Materials (IAM), Karlsruhe Institute of Technology (KIT), Kaiserstrasse 12, 76131 Karlsruhe, Germany

Received 1 August 2014; Accepted 27 November 2014

Academic Editor: Alfons Fischer

This Conference Paper is based on a presentation given by Mateusz Chlipala at “European Symposium on Friction, Wear, and Wear Protection” held from 6 May 2014 to 8 May 2014 in Karlsruhe, Germany.

Copyright © 2015 Mateusz Chlipala et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Holmberg, P. Andersson, and A. Erdemir, “Global energy consumption due to friction in passenger cars,” Tribology International, vol. 47, pp. 221–234, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. K.-H. Zum Gahr, Microstructure and Wear of Materials, Elsevier, Amsterdam, The Netherlands, 1987.
  3. I. Etsion, “Improving tribological performance of mechanical components by laser surface texturing,” Tribology Letters, vol. 17, no. 4, pp. 733–737, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Kovalchenko, O. Ajayi, A. Erdemir, G. Fenske, and I. Etsion, “The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact,” Tribology International, vol. 38, no. 3, pp. 219–225, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. R. Wahl, J. Schneider, and P. Gumbsch, “Influence of the real geometry of the protrusions in micro textured surfaces on frictional behaviour,” Tribology Letters, vol. 47, no. 3, pp. 447–453, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Borghi, E. Gualtieri, D. Marchetto, L. Moretti, and S. Valeri, “Tribological effects of surface texturing on nitriding steel for high-performance engine applications,” Wear, vol. 265, no. 7-8, pp. 1046–1051, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. I. Etsion, “State of the art in laser surface texturing,” in Advanced Tribology, pp. 761–762, Springer, Berlin, Germany, 2010. View at Publisher · View at Google Scholar
  8. B. N. Chichkov, C. Momma, S. Nolte, F. Von Alvensleben, and A. Tünnermann, “Femtosecond, picosecond and nanosecond laser ablation of solids,” Applied Physics A: Materials Science and Processing, vol. 63, no. 2, pp. 109–115, 1997. View at Google Scholar · View at Scopus
  9. P. T. Mannion, J. Magee, E. Coyne, G. M. O'Connor, and T. J. Glynn, “The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in air,” Applied Surface Science, vol. 233, no. 1–4, pp. 275–287, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Nolte, C. Momma, H. Jacobs et al., “Ablation of metals by ultrashort laser pulses,” Journal of the Optical Society of America B: Optical Physics, vol. 14, no. 10, pp. 2716–2722, 1997. View at Publisher · View at Google Scholar · View at Scopus
  11. J. M. Liu, “Simple technique for measurements of pulsed Gaussian-beam spot sizes,” Optics Letters, vol. 7, no. 5, pp. 196–198, 1982. View at Publisher · View at Google Scholar
  12. Y. Jee, M. F. Becker, and R. M. Walser, “Laser-induced damage on single-crystal metal surfaces,” Journal of the Optical Society of America B, vol. 5, no. 3, pp. 648–659, 1988. View at Publisher · View at Google Scholar
  13. J. Vincenc Obona, V. Ocelík, J. Z. P. Skolski et al., “On the surface topography of ultrashort laser pulse treated steel surfaces,” Applied Surface Science, vol. 258, no. 4, pp. 1555–1560, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Braun, C. Greiner, J. Schneider, and P. Gumbsch, “Efficiency of laser surface texturing in the reduction of friction under mixed lubrication,” Tribology International, vol. 77, pp. 142–147, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Varenberg, G. Halperin, and I. Etsion, “Different aspects of the role of wear debris in fretting wear,” Wear, vol. 252, no. 11-12, pp. 902–910, 2002. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Xu, H. Tokisue, H. Tanaka, and M. Matsumoto, “Contact vibration of micro-textured sliders,” Journal of Tribology, vol. 124, no. 2, pp. 281–287, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. A. H. Tan and S. W. Cheng, “A novel textured design for hard disk tribology improvement,” Tribology International, vol. 39, no. 6, pp. 506–511, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. X. Lu and M. M. Khonsari, “An experimental investigation of dimple effect on the stribeck curve of journal bearings,” Tribology Letters, vol. 27, no. 2, pp. 169–176, 2007. View at Publisher · View at Google Scholar · View at Scopus
  19. S.-W. Lo and T.-C. Horng, “Lubricant permeation from micro oil pits under intimate contact condition,” Journal of Tribology, vol. 121, no. 4, pp. 633–638, 1999. View at Publisher · View at Google Scholar · View at Scopus