Table of Contents
Conference Papers in Science
Volume 2015, Article ID 407048, 12 pages
http://dx.doi.org/10.1155/2015/407048
Conference Paper

Surface Analysis of Chain Joint Components after Tribological Load and Usage of Antiwear Additives

1Institute of Machine Elements, Gears, and Transmissions (MEGT), University of Kaiserslautern, 67663 Kaiserslautern, Germany
2Institute for Surface and Thin Film Analysis (IFOS), 67663 Kaiserslautern, Germany

Received 31 July 2014; Accepted 10 September 2014

Academic Editor: Martin Dienwiebel

This Conference Paper is based on a presentation given by D. Sappok at “European Symposium on Friction, Wear, and Wear Protection” held from 6 May 2014 to 8 May 2014 in Karlsruhe, Germany.

Copyright © 2015 D. Sappok et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

D. Sappok, R. Merz, B. Sauer, and M. Kopnarski, “Surface Analysis of Chain Joint Components after Tribological Load and Usage of Antiwear Additives,” Conference Papers in Science, vol. 2015, Article ID 407048, 12 pages, 2015. https://doi.org/10.1155/2015/407048.