Table of Contents
Conference Papers in Science
Volume 2015 (2015), Article ID 407048, 12 pages
http://dx.doi.org/10.1155/2015/407048
Conference Paper

Surface Analysis of Chain Joint Components after Tribological Load and Usage of Antiwear Additives

1Institute of Machine Elements, Gears, and Transmissions (MEGT), University of Kaiserslautern, 67663 Kaiserslautern, Germany
2Institute for Surface and Thin Film Analysis (IFOS), 67663 Kaiserslautern, Germany

Received 31 July 2014; Accepted 10 September 2014

Academic Editor: Martin Dienwiebel

This Conference Paper is based on a presentation given by D. Sappok at “European Symposium on Friction, Wear, and Wear Protection” held from 6 May 2014 to 8 May 2014 in Karlsruhe, Germany.

Copyright © 2015 D. Sappok et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Fink and H. Bodenstein, “Möglichkeiten der Reibungsreduktion in Kettentrieben,” Motortechnische Zeitschrift, vol. 72, no. 7-8, pp. 582–587, 2011. View at Publisher · View at Google Scholar
  2. A. Gummer, D. Sappok, and B. Sauer, “Kettenprüfeinrichtung zur Verschleißuntersuchung von Antriebs- und Steuerketten,” Tribologie und Schmierungstechnik, vol. 59, no. 2, pp. 24–29, 2012. View at Google Scholar
  3. A. Gummer, C. Fábián, and B. Sauer, “Experimental investigation of roller chain wear,” in Proceedings of the 18th International Colloquium Tribology, Technische Akademie Esslingen, Ostfildern, Germany, January 2012.
  4. D. Sappok, A. Gummer, and B. Sauer, “Experimental investigation of bush chain wear,” in Proceedings of the 8th International Conference on Mechanical Engineering (GÉPÉSZET '12), pp. 472–481, Budapest, Hungary, 2012.
  5. “Gleitlager—Prüfung des tribologischen Verhaltens von Gleitlager-werkstoffen—Teil 1: Prüfung von Lagermetallen,” Tech. Rep. DIN ISO 7148-1, Beuth, Berlin, Germany, 2013.
  6. D. Sappok and B. Sauer, “Methoden zur Erfassung der Verschleiß-Messgrößen an Kettenkom-ponenten,” in 54. Tribologie-Fachtagung (GfT) 2013, Göttingen, pp. 70.1–70.11, 2013. View at Google Scholar
  7. D. Sappok, A. Gummer, and B. Sauer, “Experimental and analytical wear investigations of bush- and roller chain drives,” in Proceedings of the 5th World Tribology Congress (WTC '13), Torino, Italy, 2013.
  8. A. Gummer, D. Sappok, and B. Sauer, “Verschleißverhalten von Hülsen- und Rollenketten,” Ant Journal, vol. 2013, pp. 10–16, 2013. View at Google Scholar
  9. R. G. Bayer, Mechanical Wear Prediction and Prevention, Marcel Dekker, New York, NY, USA, 1994.
  10. A. Gummer, Analytische Untersuchung des Geometrieeinflusses auf das Verschleiß-verhalten von Antriebsketten [Ph.D. thesis], Institute of Machine Elements, Gears, and Transmissions, University of Kaiserslautern, 2013.
  11. K.-H. Grote and J. Feldhusen, Dubbel: Taschenbuch für den Maschinenbau. 23., neu bearbeitete und erweiterte Auflage, Springer, Berlin, Germany, 2011.
  12. S. P. Timosenko and J. N. Goodier, Theory of Elasticity, McGraw-Hill Kogakusha, Tokyo, Japan, 3rd edition, 1970.
  13. D. Uy, A. E. O'Neill, S. J. Simko, and A. K. Gangopadhyay, “Soot-additive interactions in engine oils,” Lubrication Science, vol. 22, no. 1, pp. 19–36, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Hu, X. Hu, T. Liu, L. Fang, K. D. Dearn, and H. Xu, “The role of soot particles in the tribological behavior of engine lubricating oils,” Wear, vol. 304, no. 1-2, pp. 152–161, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Dilbat, J. Bölter, W. Mach, and K. Pöhlmann, “Erzeugung von Rußölen mittels eines neu konzipierten Rußgenerators sowie Charakterisierung der erzeugten Rußpartikel,” in 53. Tribologie-Fachtagung (GfT) 2012, Göttingen, pp. 36.1–36.11, 2012. View at Google Scholar
  16. R. Penchaliah, T. J. Harvey, R. J. K. Wood, K. Nelson, and H. E. G. Powrie, “The effects of diesel contaminants on trlbologlcal performance on sliding steel on steel contacts : einfluss von Dieselschadstoffen auf die tribologische Leistung von Stahl-auf-Stahl-Gleitkontakten,” Proceedings of the Institution of Mechanical Engineers, Part J (Journal of Engineering Tribology), vol. 225, no. 8, pp. 779–797, 2011. View at Google Scholar
  17. K.-H. Habig, Verschleiß und Härte von Werkstoffen, Carl Hanser, München, Germany, 1980.
  18. W. Kollenberg, Technische Keramik—Grundlagen Werkstoffe Verfahrenstechnik, Vulkan, Essen, Germany, 2nd edition, 2009.
  19. R. C. Heuberger, Combinatorial study of the tribochemistry of anti-wear lubricant additives [Dissertation], Eidgenössische Technische Hochschule, ETH Zürich, Zürich, Switzerland, 2007.
  20. H. Bhowmick, S. K. Majumdar, and S. K. Biswas, “Influence of physical structure and chemistry of diesel soot suspended in hexadecane on lubrication of steel-on-steel contact,” Wear, vol. 300, no. 1-2, pp. 180–188, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Antusch, M. Dienwiebel, E. Nold, P. Albers, U. Spicher, and M. Scherge, “On the tribochemical action of engine soot,” Wear, vol. 269, no. 1-2, pp. 1–12, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Bölter, Auswirkungen von Ruß im Schmieröl von DI-Dieselmotoren auf das tribologische Verhalten und Tribomutationen von hochbelasteten Motorkomponenten, Karlsruher Institut für Technologie (KIT), Karlsruhe, Germany, 2010.
  23. A. La Rocca, G. Di Liberto, P. J. Shayler, and M. W. Fay, “The nanostructure of soot-in-oil particles and agglomerates from an automotive diesel engine,” Tribology International, vol. 61, pp. 80–87, 2013. View at Publisher · View at Google Scholar · View at Scopus