About this Journal
Aims and scope
International Journal of RF and Microwave Computer-Aided Engineering provides a common forum for the dissemination of research and development results in the areas of computer-aided design and engineering of RF, microwave, and millimeter-wave components, circuits, subsystems, and antennas. The journal is intended to be a single source of valuable information for all engineers and technicians, RF/microwave/mm-wave CAD tool vendors, researchers in industry, government and academia, professors and students, and systems engineers involved in RF/microwave/mm-wave technology.
Multidisciplinary in scope, the journal publishes peer-reviewed original research and review articles on topics that include, but are not limited to, the following:
- Computer-Aided Modeling
- Computer-Aided Analysis
- Computer-Aided Optimization
- Software and Manufacturing Techniques
- Computer-Aided Measurements
- Measurements Interfaced with CAD Systems
The Wiley Hindawi Partnership
This journal is published by Hindawi as part of a publishing collaboration with John Wiley & Sons, Inc. It is a fully open access journal produced under the Hindawi and Wiley brands.
Bibliographic information
ISSN: 1096-4290 (Print)
ISSN: 1099-047X (Online)
DOI: 10.1155/ijmce
Archival content
Content published prior to 2023 is hosted on the Wiley Online Library.
Open Access
International Journal of RF and Microwave Computer-Aided Engineering is an open access journal. All articles are immediately available to read and reuse upon publication. More information about our Open Access policy can be found on our copyright page.
Contact
Editorial enquiries should be directed to [email protected].
General enquiries should be directed to [email protected].