Table of Contents
International Journal of Metals
Volume 2014, Article ID 120840, 11 pages
http://dx.doi.org/10.1155/2014/120840
Research Article

A Numerical Formula for General Prediction of Interface Bonding between Alumina and Aluminum-Containing Alloys

1National Institute for Materials Science, 3-13 Sakura, Tsukuba 305-0003, Japan
2National Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan

Received 19 June 2014; Accepted 9 November 2014; Published 24 December 2014

Academic Editor: Dina V. Dudina

Copyright © 2014 Michiko Yoshitake et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. U. Alber, H. Müllejans, and M. Rühle, “Wetting of copper on α-Al2O3 surfaces depending on the orientation and oxygen partial pressure,” Micron, vol. 30, no. 2, pp. 101–108, 1999. View at Publisher · View at Google Scholar · View at Scopus
  2. V. Merlin and N. Eustathopoulos, “Wetting and adhesion of Ni-Al alloys on α-Al2O3 single crystals,” Journal of Materials Science, vol. 30, no. 14, pp. 3619–3624, 1995. View at Publisher · View at Google Scholar · View at Scopus
  3. D. Chatain, F. Chabert, V. Ghetta, and J. Fouletier, “New experimental setup for wettability characterization under monitored oxygen activity: II, wettability of sapphire by silver-oxygen melts,” Journal of the American Ceramic Society, vol. 77, no. 1, pp. 197–201, 1994. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Shi, S. Tanaka, and M. Kohyama, “First-principles study of the tensile strength and failure of α-Al2O3 (0001)/Ni(111) interfaces,” Physical Review B, vol. 76, Article ID 075431, 2007. View at Publisher · View at Google Scholar
  5. S. Shi, S. Tanaka, and M. Kohyama, “First-principles investigation of the atomic and electronic structures of α-Al2O3(0001)/Ni(111) Interfaces,” Journal of the American Ceramic Society, vol. 90, no. 8, pp. 2429–2440, 2007. View at Publisher · View at Google Scholar
  6. S. Shi, S. Tanaka, and M. Kohyama, “Influence of interface structure on Schottky barrier heights of α-Al2O3(0001)/Ni(111) interfaces: a first-principles study,” Materials Transactions, vol. 47, no. 11, pp. 2696–2700, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. K. Shiraishi, T. Nakayama, T. Nakaoka, A. Ohta, and S. Miyazaki, “Theoretical investigation of metal/dielectric interfaces? Breakdown of Schottky barrier limits?” ECS Transactions, vol. 13, no. 2, pp. 21–27, 2008. View at Google Scholar
  8. T. Nagata, P. Ahmet, Y. Z. Yoo et al., “Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition,” Applied Surface Science, vol. 252, no. 7, pp. 2503–2506, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Asthagiri, C. Niederberger, A. J. Francis, L. M. Porter, P. A. Salvador, and D. S. Sholl, “Thin Pt films on the polar SrTiO3(1 1 1) surface: an experimental and theoretical study,” Surface Science, vol. 537, no. 1–3, pp. 134–152, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Yoshitake, S. Nemšák, T. Skála et al., “Modification of terminating species and band alignment at the interface between alumina films and metal single crystals,” Surface Science, vol. 604, no. 23-24, pp. 2150–2156, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Yoshitake, S. Yagyu, and T. Chikyow, “Novel method for the prediction of an interface bonding species at alumina/metal interfaces,” Journal of Vacuum Science and Technology A, vol. 32, no. 2, Article ID 021102, 8 pages, 2014. View at Publisher · View at Google Scholar
  12. http://interchembond.nims.go.jp/.
  13. A. R. Miedema and J. W. F. Dorleijn, “Quantitative predictions of the heat of adsorption of metals on metallic substrates,” Surface Science, vol. 95, no. 2-3, pp. 447–464, 1980. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Yoshitake, Y.-R. Aparna, and K. Yoshihara, “General rule for predicting surface segregation of substrate metal on film surface,” Journal of Vacuum Science & Technology A, vol. 19, no. 4, pp. 1432–1437, 2001. View at Publisher · View at Google Scholar · View at Scopus
  15. http://surfseg.nims.go.jp/SurfSeg/menu.html.
  16. K. Tanaka and K. Tamaru, “A general rule in chemisorption of gases on metals,” Journal of Catalysis, vol. 2, no. 5, pp. 366–370, 1963. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Brennan, D. O. Hayward, and B. M. Trapnell, “The calorimetric determination of the heats of adsorption of oxygen on evaporated metal films,” Proceedings of the Royal Society of London A, vol. 256, pp. 81–105, 1960. View at Publisher · View at Google Scholar
  18. N. A. Lange, Handbook of Chemistry, McGraw-Hill, 1956.
  19. L. Brewer, “The thermodynamic properties of the oxides and their vaporization processes,” Chemical Reviews, vol. 52, no. 1, pp. 1–75, 1953. View at Publisher · View at Google Scholar · View at Scopus
  20. D. R. Lide, Ed., CRC Handbook of Chemistry and Physics, CRC Press, 74th edition, 1993-1994.
  21. P. Brix and G. Herzberg, “Fine structure of the Schumann-Runge bands near the convergence limit and the dissociation energy of the oxygen molecule,” Canadian Journal of Physics, vol. 32, pp. 110–135, 1954. View at Publisher · View at Google Scholar
  22. R. M. Jaeger, H. Kuhlenbeck, H.-J. Freund et al., “Formation of a well-ordered aluminium oxide overlayer by oxidation of NiAl(110),” Surface Science, vol. 259, no. 3, pp. 235–252, 1991. View at Publisher · View at Google Scholar · View at Scopus
  23. G. Kresse, M. Schmid, E. Napetschnig, M. Shishkin, L. Köhler, and P. Varga, “Materials science: structure of the ultrathin aluminum oxide film on NiAl(110),” Science, vol. 308, no. 5727, pp. 1440–1442, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Yoshitake, W. Song, J. Libra et al., “Interface termination and band alignment of epitaxially grown alumina films on Cu-Al alloy,” Journal of Applied Physics, vol. 103, Article ID 033707, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. V. Maurice, G. Despert, S. Zanna, P. Josso, M.-P. Bacos, and P. Marcus, “The growth of protective ultra-thin alumina layers on γ-TiAl(1 1 1) intermetallic single-crystal surfaces,” Surface Science, vol. 596, no. 1–3, pp. 61–73, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. V. Maurice, G. Despert, S. Zanna, P. Josso, M.-P. Bacos, and P. Marcus, “XPS study of the initial stages of oxidation of α2-Ti3Al and γ-TiAl intermetallic alloys,” Acta Materialia, vol. 55, no. 10, pp. 3315–3325, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. K. Kovács, I. V. Perczel, V. K. Josepovits, G. Kiss, F. Réti, and P. Deák, “In situ surface analytical investigation of the thermal oxidation of Ti-Al intermetallics up to 1000°C,” Applied Surface Science, vol. 200, no. 1–4, pp. 185–195, 2002. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Schmiedgen, P. C. J. Graat, B. Baretzky, and E. J. Mittemeijer, “The initial stages of oxidation of γ-TiAl: an X-ray photoelectron study,” Thin Solid Films, vol. 415, no. 1-2, pp. 114–122, 2002. View at Publisher · View at Google Scholar · View at Scopus
  29. J. F. Silvain, J. E. Barbier, Y. Lepetitcorps, M. Alnot, and J. J. Ehrhardt, “Chemical and structural analysis of TiAl thin films sputter deposited on carbon substrates,” Surface and Coatings Technology, vol. 61, no. 1–3, pp. 245–250, 1993. View at Publisher · View at Google Scholar · View at Scopus
  30. J. Xia, H. Dong, and T. Bell, “Surface properties of a γ-based titanium aluminide at elevated temperatures,” Intermetallics, vol. 10, no. 7, pp. 723–729, 2002. View at Publisher · View at Google Scholar · View at Scopus
  31. H. Graupner, L. Hammer, K. Heinz, and D. M. Zehner, “Oxidation of low-index FeAl surfaces,” Surface Science, vol. 380, no. 2-3, pp. 335–351, 1997. View at Publisher · View at Google Scholar · View at Scopus
  32. E. Loginova, F. Cosandey, and T. E. Madey, “Nanoscopic nickel aluminate spinel (NiAl2O4) formation during NiAl(1 1 1) oxidation,” Surface Science, vol. 601, no. 3, pp. L11–L14, 2007. View at Publisher · View at Google Scholar · View at Scopus
  33. W. Zhang, J. R. Smith, and A. G. Evans, “The connection between ab initio calculations and interface adhesion measurements on metal/oxide systems: Ni/Al2O3 and Cu/Al2O3,” Acta Materialia, vol. 50, no. 15, pp. 3803–3816, 2002. View at Publisher · View at Google Scholar · View at Scopus
  34. W. Zhang and J. R. Smith, “Nonstoichiometric interfaces and Al2O3 adhesion with Al and Ag,” Physical Review Letters, vol. 85, no. 15, pp. 3225–3228, 2000. View at Publisher · View at Google Scholar · View at Scopus
  35. J. Feng, W. Zhang, and W. Jiang, “Ab initio study of Ag/Al2O3 and Au/Al2O3 interfaces,” Physical Review B, vol. 72, no. 11, Article ID 115423, 11 pages, 2005. View at Publisher · View at Google Scholar
  36. M. Yoshitake and K. Yoshihara, “The surface segregation of Ti-Nb composite film and its application to a smart getter material,” Vacuum, vol. 51, no. 3, pp. 369–376, 1998. View at Publisher · View at Google Scholar · View at Scopus