Table of Contents
Indian Journal of Materials Science
Volume 2013, Article ID 603791, 7 pages
http://dx.doi.org/10.1155/2013/603791
Research Article

Effect of Heating Mode and Copper Content on the Densification of W-Cu Alloys

1NTPC Energy Technology Research Alliance (NETRA), NTPC Ltd., E-III, Echotech-2, Greater Noida 201308, India
2Department of Materials Science and Engineering, Indian Institute of Technology, Kanpur 208016, India
3Materials Research Institute, The Pennsylvania State University, University Park, PA 16802, USA

Received 18 June 2013; Accepted 13 July 2013

Academic Editors: D. Das and Y. Ge

Copyright © 2013 Avijit Mondal et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Avijit Mondal, Anish Upadhyaya, and Dinesh Agrawal, “Effect of Heating Mode and Copper Content on the Densification of W-Cu Alloys,” Indian Journal of Materials Science, vol. 2013, Article ID 603791, 7 pages, 2013. https://doi.org/10.1155/2013/603791.