Table of Contents
Indian Journal of Materials Science
Volume 2014, Article ID 909506, 5 pages
http://dx.doi.org/10.1155/2014/909506
Research Article

Influence of Al and Ti Additions on Microstructure and Mechanical Properties of Leaded Brass Alloys

1Mechanical Engineering Department, University of Al-Anbar, Ramadi, Iraq
2Renewable Energy Research Center, University of Al-Anbar, Ramadi, Iraq

Received 13 April 2014; Revised 1 June 2014; Accepted 5 June 2014; Published 16 July 2014

Academic Editor: Debdulal Das

Copyright © 2014 Rajab Mohammed Hussein and Osama Ibrahim Abd. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Imai, Y. Kosaka, A. Kojima et al., “Characteristics and machinability of lead-free P/M Cu60-Zn40 brass alloys dispersed with graphite,” Powder Technology, vol. 198, no. 3, pp. 417–421, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. P. García, S. Rivera, M. Palacios, and J. Belzunce, “Comparative study of the parameters influencing the machinability of leaded brasses,” Engineering Failure Analysis, vol. 17, no. 4, pp. 771–776, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. D. D. Davies, A Note on the Dezincification of Brass and the Inhibiting Effect of Elemental Additions, Copper Development Association, New York, NY, USA, 1993.
  4. A. Haruiko, I. Hisashi, L. Shufeng et al., “The effect of solid solutionizing Ti element on microstructural and mechanical properties of extruded Cu-40Zn-Ti ternary alloy,” Transactions of JWRI, vol. 40, no. 1, 2011. View at Google Scholar
  5. R. Cook, “Grain refinement of aluminum-silicon foundry alloys,” in Metallurgy Aluminum, pp. 9–12, London & Scandinavian Metallurgical Co, London, UK, 1998. View at Google Scholar
  6. D. H. Herring, “Grain Size and its influence on Materials Properties,” The Heat Treat Doctor, dherring@heat.treat.doctor.com.
  7. M. Sadayappan, F. A. Fasoyinu, D. Cousineau et al., “Permanent mold casting of copper base alloys,” ICA Project No. TPT-0452-96, Final Report Phase VI MTL 97-1 (TR-R), 1997. View at Google Scholar
  8. ASM Handbook: Volume 15: Casting, American Society for Metals, Metals Pack, Ohio, USA, 1988.