Table of Contents
Indian Journal of Materials Science
Volume 2015, Article ID 763618, 10 pages
http://dx.doi.org/10.1155/2015/763618
Research Article

Wear and Corrosion of Cast Al Alloy Piston with and without Brake Oil

1Metallurgical and Materials Engineering Department, Federal University of Technology, Akure, Akure 340252, Nigeria
2Materials and Metallurgical Engineering Department, Federal University Oye Ekiti, Oye Ekiti 371104, Nigeria

Received 26 May 2015; Revised 2 September 2015; Accepted 13 September 2015

Academic Editor: Pradeep Lancy Menezes

Copyright © 2015 Olawale Olarewaju Ajibola and Daniel Toyin Oloruntoba. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. C. Ludema, “Introduction to wear,” in Friction, Lubrication, and Wear Technology, vol. 18 of The ASM Handbook, pp. 320–628, 1992. View at Google Scholar
  2. S. Mischler and P. Ponthiaux, “A round robin on combined electrochemical and friction tests on alumina/stainless steel contacts in sulphuric acid,” Wear, vol. 248, no. 1-2, pp. 211–225, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Mischler and P. Ponthiaux, “Analytical solution for precessional magnetization switching in exchange biased high perpendicular anisotropy nanostructures,” Journal of Physics D: Applied Physics, vol. 39, 7 pages, 2006. View at Publisher · View at Google Scholar
  4. S. W. Watson, F. J. Friedersdorf, B. W. Madsen, and S. D. Cramer, “Methods of measuring wear-corrosion synergism,” Wear, vol. 181–183, no. 2, pp. 476–484, 1995. View at Publisher · View at Google Scholar · View at Scopus
  5. Z. Abdel Hamid and M. T. Abou Elkhair, “Development of electroless nickel-phosphorous composite deposits for wear resistance of 6061 aluminum alloy,” Materials Letters, vol. 57, no. 3, pp. 720–726, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. D. Landolt, “Electrochemical and materials aspects of tribocorrosion systems,” in Corrosion and Surface Chemistry of Metals, pp. 227–274, EPFL Press, Lausanne, Switzerland, 2006. View at Google Scholar
  7. I. J. Polmear, Light Alloys: Metallurgy of the Light Metals, Butterworth-Heinemann, Arnold, Mo, USA, 1995.
  8. R. Bosch, Bosch Automotive Handbook, Bentley Publishers, Robert Bentley, Cambridge, Mass, USA, 7th edition, 2007.
  9. P. Marcus, “Introduction to the fundamentals of corrosion,” in Corrosion: Fundamentals, Testing, and Protection, vol. 13 of ASM Handbook, pp. 3–4, ASM International, 2003. View at Google Scholar
  10. B. O. Adewuyi, “The influence of Fe variation on the corrosion behaviour of heat treated aluminium alloys in tomato juice,” Nigerian Journal of Technology, vol. 21, no. 1, pp. 72–78, 2002. View at Google Scholar
  11. X. Sudarshan and M. K. Surappa, “Dry sliding wear of fly ash particle reinforced A356 Al composites,” Wear, vol. 265, no. 3-4, pp. 349–360, 2008. View at Publisher · View at Google Scholar
  12. D. Tabatabai, S. Szillies, F. Feil, G. Grundmeier, and W. Fürbeth, “Self-healing corrosion protective coatings for magnesium alloys by modifying anodizing layers with corrosion inhibitors,” in Proceedings of the Eurocorr Abstracts, no. 4575, Stockholm, Sweden, September 2011.
  13. M. M. Khrushchov, “Principles of abrasive wear,” Wear, vol. 28, pp. 69–88, 1974. View at Google Scholar
  14. H. Joseph, “Abrasive wear,” in Friction, Lubrication, and Wear Technology, vol. 18 of The ASM Handbook, pp. 337–341, 1992. View at Google Scholar
  15. A. G. Evans, “Impact damage mechanics: solid projectiles,” in Treatise on Materials Science and Technology, vol. 16, pp. 1–67, Academic Press, 1979. View at Google Scholar
  16. T. H. Kosel, “Solid particle erosion,” in Friction, Lubrication, and Wear Technology, vol. 18 of The ASM Handbook, pp. 367–393, 1992. View at Google Scholar
  17. Y. Yan, Corrosion and tribo-corrosion behaviour of metallic orthopaedic implant materials [Ph.D. thesis], The University of Leeds, England, UK, 2006.
  18. S. Kuiry, Evaluation of Wear-Corrosion Synergy through Tribocorrosion Studies, Bruker Nano Surfaces Division Tribology and Mechanical Testing, Campbell, Calif, USA, 2012, https://www.bruker-axs.com/.
  19. A. Neville and T. Hodgkiess, “Characterisation of high-grade alloy behaviour in severe erosion-corrosion conditions,” Wear, vol. 233–235, pp. 596–607, 1999. View at Publisher · View at Google Scholar · View at Scopus
  20. O. O. Ajibola, B. O. Adewuyi, and D. T. Oloruntoba, “Wear behaviour of sand cast eutectic Al-Si alloy in hydraulic brake fluid,” International Journal of Innovation and Applied Studies, vol. 6, no. 3, pp. 420–430, 2014. View at Google Scholar
  21. O. O. Ajibola, D. T. Oloruntoba, and B. O. Adewuyi, “Metallurgical study of cast aluminium alloy used in hydraulic master brake calliper,” International Journal of Innovation and Scientific Research, vol. 8, no. 2, pp. 324–333, 2014. View at Google Scholar
  22. O. O. Ajibola, D. T. Oloruntoba, and B. O. Adewuyi, “Design and performance evaluation of wear test jig for aluminium alloy substrate in hydraulic fluid,” in Proceedings of the Corrosion Congress on Poster Presentation (Africorr '14), Pretoria, South Africa, July 2014. View at Publisher · View at Google Scholar
  23. O. O. Ajibola, B. O. Adewuyi, and D. T. Oloruntoba, “Design and performance evaluation of wear test jig for aluminium alloy substrate in hydraulic fluid,” in Proceedings of the 8th Engineering Forum, vol. 1, pp. 85–96, October 2012. View at Publisher · View at Google Scholar
  24. O. O. Ajibola and B. O. Jimoh, “Aluminium recycling industries in Nigeria: entrepreneurship challenges and opportunities,” in Proceedings of the 7th Engineering Forum, vol. 2, pp. 238–247, Ado Ekiti, Nigeria, November 2011.
  25. O. O. Ajibola, D. T. Oloruntoba, and B. O. Adewuyi, “Effects of hard surface grinding and activation on electroless-nickel plating on cast aluminium alloy substrates,” Journal of Coatings, vol. 2014, Article ID 841619, 10 pages, 2014. View at Publisher · View at Google Scholar
  26. J. O. Alasoluyi, J. A. Omotoyinbo, J. O. Borode, S. O. O. Olusunle, and O. O. Adewoye, “Influence of secondary introduction of carbon and ferrosilicon on the microstructure of rotary furnace produced ductile iron,” International Journal of Science and Technology, vol. 2, no. 2, pp. 211–217, 2013. View at Google Scholar
  27. ASTM International, ASTM Designation G 119-03: Standard Guide for Determining Synergism between Wear and Corrosion, ASTM International, West Conshohocken, Pa, USA, 2003.
  28. M. G. Fontana, Corrosion Engineering, McGraw-Hill, New York, NY, USA, 3rd edition, 1986.