Table of Contents
Indian Journal of Materials Science
Volume 2016, Article ID 7419584, 4 pages
Research Article

Process to Improve the Adherences of Copper to a PTFE Plate

Electronics Department, Instituto Nacional de Astrofísica, Óptica y Electrónica, San Andrés Cholula, PUE, Mexico

Received 19 May 2016; Revised 24 July 2016; Accepted 4 August 2016

Academic Editor: Debdulal Das

Copyright © 2016 Abel Pérez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. X. Liao, Surface modification of polytetrafluoroethylene (PTFE) with Vacuum UV radiation from helium plasma to enhance the adhesion of sputtered copper [M.S. thesis], Rochester Institute of Technology, 2004.
  2. R. K. Ulrich and L. W. Schaper, Integrated Passive Component Technology, Wiley/IEEE Press, 2003.
  3. M. Hodsong and C. Guiles, “Everything you ever needed to know to process PTEF Microwave and RF Printed Circuit Boards (Without local Anesthesia),” ARLON Technology Enabling Innovation,,
  4. M. Cauwe and J. de Baets, “Broadband material parameter characterization for practical high-speed interconnects on printed circuit board,” IEEE Transactions on Advanced Packaging, vol. 31, no. 3, pp. 649–656, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. C. F. Coombs Jr., Printed Circuits Handbook, McGraw-Hill, New York, NY, USA, 5th edition, 2001.
  6. P. Brooks, K. Johal, and C. Sparing, Can Peel Strength Predict the Structural Integrity of the Adhesive Bond between the Copper and Laminate in PCB?CPCA, 2004.
  7. 370HR Data Sheet, Isola Group 2014.
  8. H. H. Chien, K.-J. Ma, P.-M. Chung, and C.-L. Chao, “The study of surface modification of e-PTFE materals and their applications in micro-arrayed chips,” Chung Hua Journal of Science and Engineering, vol. 6, no. 2, pp. 45–51, 2008. View at Google Scholar
  9. S.-R. Kim, “Studies on the surface changes and adhesion of PTFE by plasma and ion beam treatments,” Korea Polymer Journal, vol. 7, no. 4, pp. 250–258, 1999. View at Google Scholar · View at Scopus
  10. S. M. Pelagade, N. L. Singh, S. Mukherjee, U. P. Deshpande, and V. Ganesan, “Investigation of surface free energy for PTFE polymer by bipolar argon plasma treatment,” Journal of Surface Engineered Materials and Advanced Technology, vol. 2, pp. 132–136, 2012. View at Publisher · View at Google Scholar
  11. S. H. Hall and H. L. Heck, Advanced Signal Integrity for High-Speed Digital Designs, John Wiley & Sons, New York, NY, USA, 2009.