Table of Contents
Indian Journal of Materials Science
Volume 2016 (2016), Article ID 9380583, 8 pages
http://dx.doi.org/10.1155/2016/9380583
Research Article

Detecting Safety Zone Drill Process Parameters for Uncoated HSS Twist Drill in Machining GFRP Composites by Integrating Wear Rate and Wear Transition Mapping

1Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University, Manipal 576104, India
2Department of Humanities and Management, Manipal Institute of Technology, Manipal University, Manipal 576104, India

Received 4 March 2016; Revised 18 May 2016; Accepted 13 June 2016

Academic Editor: Pradeep Lancy Menezes

Copyright © 2016 Sathish Rao Udupi and Lewlyn Lester Raj Rodrigues. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Sathish Rao Udupi and Lewlyn Lester Raj Rodrigues, “Detecting Safety Zone Drill Process Parameters for Uncoated HSS Twist Drill in Machining GFRP Composites by Integrating Wear Rate and Wear Transition Mapping,” Indian Journal of Materials Science, vol. 2016, Article ID 9380583, 8 pages, 2016. doi:10.1155/2016/9380583