Detecting Safety Zone Drill Process Parameters for Uncoated HSS Twist Drill in Machining GFRP Composites by Integrating Wear Rate and Wear Transition Mapping

<div>Worn land surface of the 10 mm HSS drill under a feed rate of 0.30 mm/rev and at a spindle speed of 1800 rev/min.</div>

Indian Journal of Materials Science

fig11

Figure 11

Figure 11: Detecting Safety Zone Drill Process Parameters for Uncoated HSS Twist Drill in Machining GFRP Composites by Integrating Wear Rate and Wear Transition Mapping 

Figure 11 | Detecting Safety Zone Drill Process Parameters for Uncoated HSS Twist Drill in Machining GFRP Composites by Integrating Wear Rate and Wear Transition Mapping 