Table of Contents
Indian Journal of Materials Science
Volume 2017, Article ID 3067257, 6 pages
https://doi.org/10.1155/2017/3067257
Research Article

On the Mechanical Properties of Hybrid Aluminium 7075 Matrix Composite Material Reinforced with SiC and TiC Produced by Powder Metallurgy Method

1Department of Mechanical Engineering, Christ College of Engineering and Technology, Pondicherry 605010, India
2Department of Mechanical Engineering, S.S.N. College of Engineering, Chennai 603110, India
3Department of Mechanical Engineering, Pondicherry Engineering College, Pondicherry 605014, India

Correspondence should be addressed to S. Pradeep Devaneyan; moc.liamg@sngis.rp

Received 23 July 2016; Revised 20 October 2016; Accepted 8 December 2016; Published 23 January 2017

Academic Editor: Federica Bondioli

Copyright © 2017 S. Pradeep Devaneyan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

S. Pradeep Devaneyan, R. Ganesh, and T. Senthilvelan, “On the Mechanical Properties of Hybrid Aluminium 7075 Matrix Composite Material Reinforced with SiC and TiC Produced by Powder Metallurgy Method,” Indian Journal of Materials Science, vol. 2017, Article ID 3067257, 6 pages, 2017. https://doi.org/10.1155/2017/3067257.