Table of Contents
International Journal of Microwave Science and Technology
Volume 2012 (2012), Article ID 197416, 6 pages
http://dx.doi.org/10.1155/2012/197416
Research Article

Analysis and Design of Ultra-Wideband 3-Way Bagley Power Divider Using Tapered Lines Transformers

1Waseela for Integrated Telecommunication Solutions, P.O. Box 962487, Amman 11196, Jordan
2Electrical Engineering Department, King Faisal University, P.O. Box 400, Al-Ahsa 31982, Saudi Arabia
3Electrical Engineering Department, Jordan University of Science and Technology, P.O. Box 3030, Irbid 22110, Jordan
4Electrical Engineering Department, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia

Received 26 October 2011; Accepted 11 April 2012

Academic Editor: Walter De Raedt

Copyright © 2012 Khair Al Shamaileh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

An ultra-wideband (UWB) modified 3-way Bagley polygon power divider (BPD) that operates over a frequency range of 2–16 GHz is presented. To achieve the UWB operation, the conventional quarter-wave transformers in the BPD are substituted by two tapered line transformers. For verification purposes, the proposed divider is simulated, fabricated, and measured. The agreement between the full-wave simulation results and the measurement ones validates the design procedure.