Table of Contents
International Journal of Nuclear Energy
Volume 2014, Article ID 657689, 8 pages
http://dx.doi.org/10.1155/2014/657689
Research Article

Oxidation/Corrosion Behaviour of ODS Ferritic/Martensitic Steels in Pb Melt at Elevated Temperature

Institute for Physics and Mechanics of National Academy of Sciences of Ukraine, 5 Naukova Street, Lviv 79601, Ukraine

Received 12 December 2013; Revised 31 January 2014; Accepted 31 January 2014; Published 3 March 2014

Academic Editor: Massimo Zucchetti

Copyright © 2014 O. I. Yaskiv and V. M. Fedirko. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Design of an Actinide Burning, Lead or Lead-Bismuth Cooled Reactor That Produces Low Cost Electricity,” (INEEL/EXT-01-01376. MIT-ANP-PR-083. FY-01 Annual Report, 181, 2001).
  2. Comparative assessment of thermophysical and thermohydraulic characteristics of lead, lead-bismuth and sodium coolants for fast reactors,” (IAEA-TECDOC-1289, Vienna, 2002).
  3. Power reactors and sub-critical blanket systems with lead and lead-bismuth as coolant and/or target material,” (IAEA-TECDOC-1348. 2003).
  4. R. L. Klueh, J. P. Shingledecker, R. W. Swindeman, and D. T. Hoelzer, “Oxide dispersion-strengthened steels: a comparison of some commercial and experimental alloys,” Journal of Nuclear Materials, vol. 341, no. 2-3, pp. 103–114, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Ehrlich, E. E. Bloom, and T. Kondo, “International strategy for fusion materials development,” Journal of Nuclear Materials, vol. 283–287, no. 1, pp. 79–88, 2000. View at Publisher · View at Google Scholar · View at Scopus
  6. U. Shigeharu and M. Fujiwara, “Perspective of ODS alloys application in nuclear environments,” Journal of Nuclear Materials, vol. 307–311, no. 1, pp. 749–757, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. V. Kochubey, H. Al-Badairy, G. Tatlock, J. Le-Coze, D. Naumenko, and W. J. Quadakkers, “Effects of minor additions and impurities on oxidation behaviour of FeCrAl alloys. Development of novel surface coatings compositions,” Materials and Corrosion, vol. 56, no. 12, pp. 848–853, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Y. Lai, High Temperature Corrosion of Engineering Alloys, ASMInt, Materials Park, Ohio, USA, 1990.
  9. K. Kikuchi, Comprehensive Nuclear Materials 207, 2012.
  10. L. Soler, F. J. Martín, F. Hernández, and D. Gómez-Briceño, “Corrosion of stainless steels in lead-bismuth eutectic up to 600°C,” Journal of Nuclear Materials, vol. 335, no. 2, pp. 174–179, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Zhang and N. Li, “Analysis on liquid metal corrosion-oxidation interactions,” Corrosion Science, vol. 49, no. 11, pp. 4154–4184, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. R. Ganesan, T. Gnanasekarana, and R. S. Srinivasab, “Standard molar Gibbs free energy of formation of PbO(s) over a wide temperature range from EMF measurements,” Journal of Nuclear Materials, vol. 320, no. 3, pp. 258–264, 2003. View at Publisher · View at Google Scholar
  13. Handbook on Lead-Bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermalhydraulics and Technologies, 2007.
  14. N. Li, “Active control of oxygen in molten lead-bismuth eutectic systems to prevent steel corrosion and coolant contamination,” Journal of Nuclear Materials, vol. 300, no. 1, pp. 73–81, 2002. View at Publisher · View at Google Scholar
  15. V. M. Fedirko, O. I. Eliseeva, V. I. Kalyandruk, and V. A. Lopushans'kyi, “Corrosion of Armco iron and model Fe-Cr-Al alloys in oxygen-containing lead melts,” Materials Science, vol. 33, no. 2, pp. 207–211, 1997. View at Google Scholar · View at Scopus
  16. J. Zhang, “A review of steel corrosion by liquid lead and lead-bismuth,” Corrosion Science, vol. 51, no. 6, pp. 1207–1227, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Machut, K. Sridharan, N. Li, S. Ukai, and T. Allen, “Time dependence of corrosion in steels for use in lead-alloy cooled reactors,” Journal of Nuclear Materials, vol. 371, no. 1–3, pp. 134–144, 2007. View at Publisher · View at Google Scholar · View at Scopus