Table of Contents Author Guidelines Submit a Manuscript
International Journal of Spectroscopy
Volume 2011 (2011), Article ID 641257, 8 pages
Research Article

Distribution of Heat Stabilizers in Plasticized PVC-Based Biomedical Devices: Temperature and Time Effects

1Gambro Dasco S.p.A, Via Modenese 30, 41036 Modena, Italy
2Department of Chemistry, University of Modena and Reggio Emilia, Via G. Campi 183, 41125 Modena, Italy
3INSTM, UdR of Modena, 41125 Modena, Italy

Received 20 April 2011; Revised 13 June 2011; Accepted 14 June 2011

Academic Editor: Ahmed Aamouche

Copyright © 2011 Lidia Maria Bodecchi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • Bertrand Quesne, Nadège Reverdy-Bruas, Davide Beneventi, Didier Chaussy, and Mohamed Naceur Belgacem, “Surface characterization of industrial flexible polyvinyl(chloride) films,” Applied Surface Science, 2014. View at Publisher · View at Google Scholar
  • Micheal Nouman, Johanna Saunier, Emile Jubeli, and Najet Yagoubi, “Additive blooming in polymer materials: Consequences in the pharmaceutical and medical field,” Polymer Degradation and Stability, 2017. View at Publisher · View at Google Scholar
  • H. Al Salloum, J. Saunier, A. Dazzi, J. Vigneron, A. Etcheberry, C. Marlière, C. Aymes-Chodur, J.M. Herry, M. Bernard, E. Jubeli, and N. Yagoubi, “Characterization of the surface physico-chemistry of plasticized PVC used in blood bag and infusion tubing,” Materials Science and Engineering: C, 2017. View at Publisher · View at Google Scholar