Table of Contents 
International Journal of Spectroscopy
Volume 2011, Article ID 641257, 8 pages
http://dx.doi.org/10.1155/2011/641257
Research Article

Distribution of Heat Stabilizers in Plasticized PVC-Based Biomedical Devices: Temperature and Time Effects

Lidia Maria Bodecchi,1 Caterina Durante,2,3 Marcello Malagoli,1 Matteo Manfredini,1 Andrea Marchetti,2,3 and Simona Sighinolfi2,3

1Gambro Dasco S.p.A, Via Modenese 30, 41036 Modena, Italy
2Department of Chemistry, University of Modena and Reggio Emilia, Via G. Campi 183, 41125 Modena, Italy
3INSTM, UdR of Modena, 41125 Modena, Italy

Received 20 April 2011; Revised 13 June 2011; Accepted 14 June 2011

Academic Editor: Ahmed Aamouche

Copyright © 2011 Lidia Maria Bodecchi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Lidia Maria Bodecchi, Caterina Durante, Marcello Malagoli, Matteo Manfredini, Andrea Marchetti, and Simona Sighinolfi, “Distribution of Heat Stabilizers in Plasticized PVC-Based Biomedical Devices: Temperature and Time Effects,” International Journal of Spectroscopy, vol. 2011, Article ID 641257, 8 pages, 2011. https://doi.org/10.1155/2011/641257.