Table of Contents Author Guidelines Submit a Manuscript
International Journal of Spectroscopy
Volume 2011 (2011), Article ID 641257, 8 pages
http://dx.doi.org/10.1155/2011/641257
Research Article

Distribution of Heat Stabilizers in Plasticized PVC-Based Biomedical Devices: Temperature and Time Effects

1Gambro Dasco S.p.A, Via Modenese 30, 41036 Modena, Italy
2Department of Chemistry, University of Modena and Reggio Emilia, Via G. Campi 183, 41125 Modena, Italy
3INSTM, UdR of Modena, 41125 Modena, Italy

Received 20 April 2011; Revised 13 June 2011; Accepted 14 June 2011

Academic Editor: Ahmed Aamouche

Copyright © 2011 Lidia Maria Bodecchi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Bacalogulu, M. H. Fisch, J. Kaufhold, and H. J. Sander, “PVC Stabilizers,” in Plastics Additives Handbook, H. Zweifel, Ed., chapter 3, Munich, Germany, 5th edition, 2001. View at Google Scholar
  2. M. Hakkarainen, “New PVC materials for medical applications—the release profile of PVC/polycaprolactone-polycarbonate aged in aqueous environments,” Polymer Degradation and Stability, vol. 80, no. 3, pp. 451–458, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. R. Ito, F. Seshimo, Y. Haishima et al., “Reducing the migration of di-2-ethylhexyl phthalate from polyvinyl chloride medical devices,” International Journal of Pharmaceutics, vol. 303, no. 1-2, pp. 104–112, 2005. View at Publisher · View at Google Scholar · View at PubMed · View at Scopus
  4. Y. R. Shashoua, “Effect of indoor climate on the rate and degradation mechanism of plasticized poly (vinyl chloride),” Polymer Degradation and Stability, vol. 81, no. 1, pp. 29–36, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. Q. Wang and B. K. Storm, “Separation and analysis of low molecular weight plasticizers in poly(vinyl chloride) tubes,” Polymer Testing, vol. 24, no. 3, pp. 290–300, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. B. Liu, W. Q. Liu, and M. H. Hou, “Metal dicarboxylates as thermal stabilizers for PVC,” Polymer Degradation and Stability, vol. 92, no. 8, pp. 1565–1571, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Haishima, R. Matsuda, Y. Hayashi, C. Hasegawa, T. Yagami, and T. Tsuchiya, “Risk assessment of di(2-ethylhexyl)phthalate released from PVC blood circuits during hemodialysis and pump-oxygenation therapy,” International Journal of Pharmaceutics, vol. 274, no. 1-2, pp. 119–129, 2004. View at Publisher · View at Google Scholar · View at PubMed · View at Scopus
  8. K. Kambia, T. Dine, B. Gressier et al., “Evaluation of childhood exposure to di(2-ethylhexyl) phthalate from perfusion kits during long-term parenteral nutrition,” International Journal of Pharmaceutics, vol. 262, no. 1-2, pp. 83–91, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. N. M. K. Lamba, J. M. Courtney, J. D. S. Gaylor, and G. D. O. Lowe, “In vitro investigation of the blood response to medical grade PVC and the effect of heparin on the blood response,” Biomaterials, vol. 21, no. 1, pp. 89–96, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Zhao and J. M. Courtney, “Influence on blood of plasticized polyvinyl chloride: significance of the plasticizer,” Artificial Organs, vol. 23, no. 1, pp. 104–107, 1999. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Manfredini, A. Marchetti, D. Atzei et al., “Radiation-induced migration of additives in PVC-based biomedical disposable devices. Part 1. Surface morphology by AFM and SEM/XEDS,” Surface and Interface Analysis, vol. 35, no. 4, pp. 395–402, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Manfredini, A. Marchetti, D. Atzei et al., “Radiation-induced migration of additives in PVC-based biomedical disposable devices part 2. Surface analysis by XPS,” Surface and Interface Analysis, vol. 35, no. 8, pp. 673–681, 2003. View at Publisher · View at Google Scholar · View at Scopus
  13. L.J. Gonzalez-Ortiz, M. Arellano, M.J. Sanchez-Pena, E. Mendizabal, and C.F. Jasso-Gastinel, “Effect of stearate preheating on the thermal stability of plasticized PVC compounds,” Polymer Degradation and Stability, vol. 91, no. 11, pp. 2715–2722, 2006. View at Google Scholar
  14. D. Briggs, Surface Analysis of Polymer by XPS and Static SIMS, Cambridge University Press, New York, NY, USA, 1998.
  15. W. H. Starnes, “Structural and mechanistic aspects of the thermal degradation of poly(vinyl chloride),” Progress in Polymer Science, vol. 27, no. 10, pp. 2133–2170, 2002. View at Publisher · View at Google Scholar · View at Scopus
  16. D. Atek and N. Belhaneche-Bensemra, “FTIR investigation of the specific migration of additives from rigid poly(vinyl chloride),” European Polymer Journal, vol. 41, no. 4, pp. 707–714, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Minegawa, “New developments in polymer stabilization,” Polymer Degradation and Stability, vol. 25, no. 2–4, pp. 121–141, 1989. View at Google Scholar
  18. “European pharmacopoeia IV,” Section 3.1, 2002.
  19. A. A. A. De Queiroz, É. R. Barrak, and S. C. De Castro, “Thermodynamic analysis of the surface of biomaterials,” Journal of Molecular Structure, vol. 394, no. 2-3, pp. 271–279, 1997. View at Google Scholar · View at Scopus
  20. C. Anton-Prinet, G. Mur, M. Gay, L. J. Audouin, and J. Verdu, “Photoageing of rigid PVC—I. Films containing Ca/Zn thermal stabiliser,” Polymer Degradation and Stability, vol. 60, no. 2-3, pp. 265–273, 1998. View at Publisher · View at Google Scholar
  21. R. Benavides, M. Edge, and N. S. Allen, “The mode of action of metal stearate stabilisers in poly (vinyl chloride): II. Influence of pre-heating on induction times and carbonyl formation,” Polymer Degradation and Stability, vol. 49, no. 1, pp. 205–211, 1995. View at Google Scholar · View at Scopus
  22. R. Benavides, M. Edge, and N. S. Allen, “The mode of action of metal stearate stabilisers in poly(vinyl chloride). I. Influence of pre-heating on melt complexation,” Polymer Degradation and Stability, vol. 44, no. 3, pp. 375–378, 1994. View at Google Scholar · View at Scopus
  23. I. Fras, P. Cassagnau, and A. Michel, “Lubrication and slip flow during extrusion of plasticized PVC compounds in the presence of lead stabilizer,” Polymer, vol. 40, no. 5, pp. 1261–1269, 1999. View at Publisher · View at Google Scholar · View at Scopus
  24. I. Fras, P. Cassagnau, and A. Michel, “Influence of processing conditions on the leaching of thermal stabilizers from plasticized polyvinyl chloride in the presence of water,” Journal of Applied Polymer Science, vol. 70, no. 12, pp. 2391–2400, 1998. View at Google Scholar · View at Scopus
  25. L. M. Bodecchi, M. Cocchi, M. Malagoli, M. Manfredini, and A. Marchetti, “Application of infrared spectroscopy and multivariate quality-control methods in PVC manufacturing,” Analytica Chimica Acta, vol. 554, no. 1-2, pp. 207–217, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Beltrán, J. C. García, and A. Marcilla, “Infrared spectral changes in PVC and plasticized PVC during gelation and fusion,” European Polymer Journal, vol. 33, no. 4, pp. 453–462, 1997. View at Google Scholar · View at Scopus
  27. F. Garbassi, M. Morra, and E. Occhiello, Polymer Surfaces. From physics to Technology, chapter XII, Wiley, Chichester, UK, 1998.
  28. B. D. Ratner, “Biomaterials science: an interdisciplinary endeavor,” in Materials in Medicine, B. D. Ratner, A. S. Hoffman, F. J. Schoen, and J. Lemons, Eds., chapter I, Academic Press, San Diego, Calif, USA, 1996. View at Google Scholar
  29. D. Coombs, “The use of diamond as an ATR material,” Vibrational Spectroscopy, vol. 2, pp. 3–5, 1999. View at Google Scholar
  30. B. Singh and N. Sharma, “Mechanistic implications of plastic degradation,” Polymer Degradation and Stability, vol. 93, no. 3, pp. 561–584, 2008. View at Publisher · View at Google Scholar · View at Scopus
  31. B. J. Lambert and F. W. Tang, “Rationale for practical medical device accelerated aging programs in AAMI TIR 17,” Radiation Physics and Chemistry, vol. 57, no. 3–6, pp. 349–53, 2000. View at Publisher · View at Google Scholar
  32. AAMI, “Compatibility of materials subject to sterilization,” Tech. Rep. AAMI TIR17, Association for the Advancement of Medical Instrumentation, Washington Boulevard, Calif, USA, 2008. View at Google Scholar
  33. C. A. Andersson and R. Bro, “The N-way toolbox for MATLAB,” Chemometrics and Intelligent Laboratory Systems, vol. 52, no. 1, pp. 1–4, 2000. View at Publisher · View at Google Scholar
  34. M. M. Hirschler, “Hydrogen chloride evolution from the heating of poly(vinyl chloride) compounds,” Fire and Materials, vol. 29, no. 6, pp. 367–382, 2005. View at Publisher · View at Google Scholar · View at Scopus