Table of Contents
International Journal of Vehicular Technology
Volume 2011 (2011), Article ID 275785, 11 pages
Research Article

Comparison of PMAC Machines for Starter-Generator Application in a Series Hybrid-Electric Bus

Department of Electrical and Computer Engineering, Michigan State University, East Lansing, MI 48824, USA

Received 13 August 2010; Accepted 4 January 2011

Academic Editor: Tee Cheng

Copyright © 2011 Sinisa Jurkovic and Elias G. Strangas. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. M. Miller, Propulsion Systems for Hybrid Vehicles, Institution of Electrical Engineers, London, UK, 2004.
  2. W. Cai, “Comparison and review of electric machines for integrated starter alternator applications,” in Proceedings of the IEEE Industry Applications Conference, vol. 1 of IAS Annual Meeting no. 39, pp. 386–393, Seattle, Wash, USA, October 2004. View at Scopus
  3. L. Chedot, G. Friedrich, J.-M. Biedinger, and P. Macret, “Integrated starter generator: the need for an optimal design and control approach. Application to a permanent magnet machine,” IEEE Transactions on Industry Applications, vol. 43, no. 2, pp. 551–559, 2007. View at Google Scholar
  4. A. M. El-Refaie, High speed operation of permanent magnet machines, Ph.D. dissertation, University of Winsconsin Madison, 2005.
  5. “24V Starters for Cumins Diesel Engines,” 2007,
  6. M. Ehsani, Y. Gao, S. E. Gay, and A. Emadi, Modern Electric, Hybrid Electric, and Fuel Cell Vehicles, CRC Press, Boca Raton, Fla, USA, 2004.
  7. A. S. Nagorny, N. V. Dravid, R. H. Jansen, and B. H. Kenny, “Design aspects of a high speed permanent magnet synchronous motor / generator for flywheel applications,” in Proceedings of the IEEE International Conference on Electric Machines and Drives, pp. 635–641, May 2005.
  8. J. Cross and P. Viarouge, “Synthesis of high performance PM motors with concentrated windings,” IEEE Transactions on Energy Conversion, vol. 17, pp. 248–253, 2002. View at Google Scholar
  9. F. Caricchi, F. Crescimbini, T. A. Lipo, and E. Santini, “Innovative inverter topology for concentrated winding PM motor drives,” in Proceedings of the IEEE Power Electronics Specialists Conference, vol. 2, pp. 964–972, June 1992.
  10. K. Atallah, D. Howe, P. H. Mellor, and D. A. Stone, “Rotor loss in permanent-magnet brushless AC machines,” IEEE Transactions on Industry Applications, vol. 36, pp. 1612–1618, 2000. View at Google Scholar
  11. D. Ishak, Z. Q. Zhu, and D. Howe, “Analytical prediction of rotor eddy current losses in permanent magnet brushless machines with all teeth and alternate teeth windings—part I: polar co-ordinate model,” in Proceedings of the 71th International Conference on Electrical Machines and Systems (ICEMS '04), CD-Rom, 2004.
  12. Z. Q. Zhu, D. Howe, E. Bolte, and B. Ackermann, “Instantaneous magnetic field distribution in brushless permanent magnet dc motors—part I: open-circuit field,” IEEE Transactions on Magnetics, vol. 29, pp. 124–135, 1993. View at Google Scholar